kernel/git/stable/linux.git/drivers/mmc/host, branch linux-5.5.y

mmc: sdhci: Refactor sdhci_set_timeout()

2020-04-17T14:12:20+00:00

[ Upstream commit 7d76ed77cfbd39468ae58d419f537d35ca892d83 ] Refactor sdhci_set_timeout() such that platform drivers can do some functionality in a set_timeout() callback and then call __sdhci_set_timeout() to complete the operation. Signed-off-by: Faiz Abbas Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200116105154.7685-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci: Convert sdhci_set_timeout_irq() to non-static

2020-04-17T14:12:20+00:00

[ Upstream commit 7907ebe741a7f14ed12889ebe770438a4ff47613 ] Export sdhci_set_timeout_irq() so that it is accessible from platform drivers. Signed-off-by: Faiz Abbas Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200116105154.7685-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-of-esdhc: fix esdhc_reset() for different controller versions

2020-04-17T14:12:09+00:00

commit 2aa3d826adb578b26629a79b775a552cfe3fedf7 upstream. This patch is to fix operating in esdhc_reset() for different controller versions, and to add bus-width restoring after data reset for eSDHC (verdor version <= 2.2). Also add annotation for understanding. Signed-off-by: Yangbo Lu Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200108040713.38888-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mmci_sdmmc: Fix clear busyd0end irq flag

2020-04-17T14:12:03+00:00

commit d4a384cb563e555ce00255f5f496b503e6cc6358 upstream. The busyd0 line transition can be very fast. The busy request may be completed by busy_d0end, without waiting for the busy_d0 steps. Therefore, clear the busyd0end irq flag, even if no busy_status. Fixes: 0e68de6aa7b1 ("mmc: mmci: sdmmc: add busy_complete callback") Cc: stable@vger.kernel.org Signed-off-by: Ludovic Barre Link: https://lore.kernel.org/r/20200325143409.13005-2-ludovic.barre@st.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY

2020-04-01T08:59:33+00:00

[ Upstream commit d2f8bfa4bff5028bc40ed56b4497c32e05b0178f ] It has turned out that the sdhci-tegra controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support. Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY. Reported-by: Bitan Biswas Reported-by: Peter Geis Suggested-by: Sowjanya Komatineni Cc: Tested-by: Sowjanya Komatineni Tested-By: Peter Geis Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY

2020-04-01T08:59:32+00:00

[ Upstream commit 055e04830d4544c57f2a5192a26c9e25915c29c0 ] It has turned out that the sdhci-omap controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support. Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY. Reported-by: Naresh Kamboju Reported-by: Anders Roxell Reported-by: Faiz Abbas Cc: Tested-by: Anders Roxell Tested-by: Faiz Abbas Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012)

2020-03-25T07:27:04+00:00

commit 3397b251ea02003f47f0b1667f3fe30bb4f9ce90 upstream. On the Acer Aspire Switch 10 (SW5-012) microSD slot always reports the card being write-protected even though microSD cards do not have a write-protect switch at all. Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk which when set sets the MMC_CAP2_NO_WRITE_PROTECT flag on the controller for the external SD slot; and add a DMI quirk table entry which selects this quirk for the Acer SW5-012. Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316184753.393458-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320

2020-03-25T07:27:04+00:00

commit 84d49b3d08a1d33690cc159036f381c31c27c17b upstream. Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288 PMIC depending on the design one of 2 possible LDOs on the PMIC is used for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in low noise LDO mode). The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM methods to set 3.3 or 1.8 signalling voltage and this appears to work as advertised, so presumably the device is actually using GPIO1LDO for the external microSD signalling voltage. But this device has a bug in the _PS0 method of the SHC1 ACPI device, the DSM remembers the last set signalling voltage and the _PS0 restores this after a (runtime) suspend-resume cycle, but it "restores" the voltage on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3 is used for the LCD and setting it to 1.8V causes the LCD to go black. This commit works around this issue by calling the Intel DSM to reset the signal voltage to 3.3V after the host has been runtime suspended. This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which leaves it at its original setting fixing the LCD going black. This commit adds and uses a DMI quirk mechanism to only trigger this workaround on the Lenovo Miix 320 while leaving the behavior of the driver unchanged on other devices. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294 BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355 Reported-by: russianneuromancer Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316184753.393458-1-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier

2020-03-25T07:27:04+00:00

commit 18b587b45c13bb6a07ed0edac15f06892593d07a upstream. The SDHCI_PRESET_FOR_* registers are not set for the UniPhier platform integration. (They are all read as zeros). Set the SDHCI_QUIRK2_PRESET_VALUE_BROKEN quirk flag. Otherwise, the High Speed DDR mode on the eMMC controller (MMC_TIMING_MMC_DDR52) would not work. I split the platform data to give no impact to other platforms, although the UniPhier platform is currently only the upstream user of this IP. The SDHCI_QUIRK2_PRESET_VALUE_BROKEN flag is set if the compatible string matches to "socionext,uniphier-sd4hc". Signed-off-by: Masahiro Yamada Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200312104257.21017-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

2020-03-25T07:27:04+00:00

commit 53dd0a7cd65edc83b0c243d1c08377c8b876b2ee upstream. SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least SAMA5D27 doesn't). Fix this by forcing card-detect in the module if module-controlled CD is not used. Fixed commit addresses the problem only for non-removable cards. This amends it to also cover gpio-cd case. Cc: stable@vger.kernel.org Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices") Signed-off-by: Michał Mirosław Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman