kernel/git/stable/linux.git/drivers/net/bonding, branch linux-6.15.y

bonding: assign random address if device address is same as bond

2025-06-19T13:39:47+00:00

[ Upstream commit 5c3bf6cba7911f470afd748606be5c03a9512fcc ] This change addresses a MAC address conflict issue in failover scenarios, similar to the problem described in commit a951bc1e6ba5 ("bonding: correct the MAC address for 'follow' fail_over_mac policy"). In fail_over_mac=follow mode, the bonding driver expects the formerly active slave to swap MAC addresses with the newly active slave during failover. However, under certain conditions, two slaves may end up with the same MAC address, which breaks this policy: 1) ip link set eth0 master bond0 -> bond0 adopts eth0's MAC address (MAC0). 2) ip link set eth1 master bond0 -> eth1 is added as a backup with its own MAC (MAC1). 3) ip link set eth0 nomaster -> eth0 is released and restores its MAC (MAC0). -> eth1 becomes the active slave, and bond0 assigns MAC0 to eth1. 4) ip link set eth0 master bond0 -> eth0 is re-added to bond0, now both eth0 and eth1 have MAC0. This results in a MAC address conflict and violates the expected behavior of the failover policy. To fix this, we assign a random MAC address to any newly added slave if its current MAC address matches that of the bond. The original (permanent) MAC address is saved and will be restored when the device is released from the bond. This ensures that each slave has a unique MAC address during failover transitions, preserving the integrity of the fail_over_mac=follow policy. Fixes: 3915c1e8634a ("bonding: Add "follow" option to fail_over_mac") Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bonding: Fix multiple long standing offload races

2025-06-19T13:39:43+00:00

[ Upstream commit d2fddbd3479928e52061e1c8dd302006b6283ce8 ] Refactor the bonding ipsec offload operations to fix a number of long-standing control plane races between state migration and user deletion and a few other issues. xfrm state deletion can happen concurrently with bond_change_active_slave() operation. This manifests itself as a bond_ipsec_del_sa() call with x->lock held, followed by a bond_ipsec_free_sa() a bit later from a wq. The alternate path of these calls coming from xfrm_dev_state_flush() can't happen, as that needs the RTNL lock and bond_change_active_slave() already holds it. 1. bond_ipsec_del_sa_all() might call xdo_dev_state_delete() a second time on an xfrm state that was concurrently killed. This is bad. 2. bond_ipsec_add_sa_all() can add a state on the new device, but pending bond_ipsec_free_sa() calls from the old device will then hit the WARN_ON() and then, worse, call xdo_dev_state_free() on the new device without a corresponding xdo_dev_state_delete(). 3. Resolve a sleeping in atomic context introduced by the mentioned "Fixes" commit. bond_ipsec_del_sa_all() and bond_ipsec_add_sa_all() now acquire x->lock and check for x->km.state to help with problems 1 and 2. And since xso.real_dev is now a private pointer managed by the bonding driver in xfrm state, make better use of it to fully fix problems 1 and 2. In bond_ipsec_del_sa_all(), set xso.real_dev to NULL while holding both the mutex and x->lock, which makes sure that neither bond_ipsec_del_sa() nor bond_ipsec_free_sa() could run concurrently. Fix problem 3 by moving the list cleanup (which requires the mutex) from bond_ipsec_del_sa() (called from atomic context) to bond_ipsec_free_sa() Finally, simplify bond_ipsec_del_sa() and bond_ipsec_free_sa() by using xso->real_dev directly, since it's now protected by locks and can be trusted to always reflect the offload device. Fixes: 2aeeef906d5a ("bonding: change ipsec_lock from spin lock to mutex") Signed-off-by: Cosmin Ratiu Reviewed-by: Leon Romanovsky Reviewed-by: Nikolay Aleksandrov Reviewed-by: Hangbin Liu Tested-by: Hangbin Liu Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

bonding: Mark active offloaded xfrm_states

2025-06-19T13:39:43+00:00

[ Upstream commit fd4e41ebf66cb8b43de2f640b97314c4ee3b4499 ] When the active link is changed for a bond device, the existing xfrm states need to be migrated over to the new link. This is done with: - bond_ipsec_del_sa_all() goes through the offloaded states list and removes all of them from hw. - bond_ipsec_add_sa_all() re-offloads all states to the new device. But because the offload status of xfrm states isn't marked in any way, there can be bugs. When all bond links are down, bond_ipsec_del_sa_all() unoffloads everything from the previous active link. If the same link then comes back up, nothing gets reoffloaded by bond_ipsec_add_sa_all(). This results in a stack trace like this a bit later when user space removes the offloaded rules, because mlx5e_xfrm_del_state() is asked to remove a rule that's no longer offloaded: [] Call Trace: [] [] ? __warn+0x7d/0x110 [] ? mlx5e_xfrm_del_state+0x90/0xa0 [mlx5_core] [] ? report_bug+0x16d/0x180 [] ? handle_bug+0x4f/0x90 [] ? exc_invalid_op+0x14/0x70 [] ? asm_exc_invalid_op+0x16/0x20 [] ? mlx5e_xfrm_del_state+0x73/0xa0 [mlx5_core] [] ? mlx5e_xfrm_del_state+0x90/0xa0 [mlx5_core] [] bond_ipsec_del_sa+0x1ab/0x200 [bonding] [] xfrm_dev_state_delete+0x1f/0x60 [] __xfrm_state_delete+0x196/0x200 [] xfrm_state_delete+0x21/0x40 [] xfrm_del_sa+0x69/0x110 [] xfrm_user_rcv_msg+0x11d/0x300 [] ? release_pages+0xca/0x140 [] ? copy_to_user_tmpl.part.0+0x110/0x110 [] netlink_rcv_skb+0x54/0x100 [] xfrm_netlink_rcv+0x31/0x40 [] netlink_unicast+0x1fc/0x2d0 [] netlink_sendmsg+0x1e4/0x410 [] __sock_sendmsg+0x38/0x60 [] sock_write_iter+0x94/0xf0 [] vfs_write+0x338/0x3f0 [] ksys_write+0xba/0xd0 [] do_syscall_64+0x4c/0x100 [] entry_SYSCALL_64_after_hwframe+0x4b/0x53 There's also another theoretical bug: Calling bond_ipsec_del_sa_all() multiple times can result in corruption in the driver implementation if the double-free isn't tolerated. This isn't nice. Before the "Fixes" commit, xs->xso.real_dev was set to NULL when an xfrm state was unoffloaded from a device, but a race with netdevsim's .xdo_dev_offload_ok() accessing real_dev was considered a sufficient reason to not set real_dev to NULL anymore. This unfortunately introduced the new bugs. Since .xdo_dev_offload_ok() was significantly refactored by [1] and there are no more users in the stack of xso.real_dev, that race is now gone and xs->xso.real_dev can now once again be used to represent which device (if any) currently holds the offloaded rule. Go one step further and set real_dev after add/before delete calls, to catch any future driver misuses of real_dev. [1] https://lore.kernel.org/netdev/cover.1739972570.git.leon@kernel.org/ Fixes: f8cde9805981 ("bonding: fix xfrm real_dev null pointer dereference") Signed-off-by: Cosmin Ratiu Reviewed-by: Leon Romanovsky Reviewed-by: Nikolay Aleksandrov Reviewed-by: Hangbin Liu Tested-by: Hangbin Liu Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}

2025-06-19T13:39:43+00:00

[ Upstream commit 43eca05b6a3b917c600e10cc6b06bfa57fa57401 ] Previously, device driver IPSec offload implementations would fall into two categories: 1. Those that used xso.dev to determine the offload device. 2. Those that used xso.real_dev to determine the offload device. The first category didn't work with bonding while the second did. In a non-bonding setup the two pointers are the same. This commit adds explicit pointers for the offload netdevice to .xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free() which eliminates the confusion and allows drivers from the first category to work with bonding. xso.real_dev now becomes a private pointer managed by the bonding driver. Signed-off-by: Cosmin Ratiu Reviewed-by: Leon Romanovsky Reviewed-by: Nikolay Aleksandrov Signed-off-by: Steffen Klassert Stable-dep-of: fd4e41ebf66c ("bonding: Mark active offloaded xfrm_states") Signed-off-by: Sasha Levin

bonding: hold ops lock around get_link

2025-04-12T01:53:20+00:00

syzbot reports a case of ethtool_ops->get_link being called without ops lock: ethtool_op_get_link+0x15/0x60 net/ethtool/ioctl.c:63 bond_check_dev_link+0x1fb/0x4b0 drivers/net/bonding/bond_main.c:864 bond_miimon_inspect drivers/net/bonding/bond_main.c:2734 [inline] bond_mii_monitor+0x49d/0x3170 drivers/net/bonding/bond_main.c:2956 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xac3/0x18e0 kernel/workqueue.c:3319 worker_thread+0x870/0xd50 kernel/workqueue.c:3400 kthread+0x7b7/0x940 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Commit 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") changed to lockless __linkwatch_sync_dev in ethtool_op_get_link. All paths except bonding are coming via locked ioctl. Add necessary locking to bonding. Reviewed-by: Hangbin Liu Reported-by: syzbot+48c14f61594bdfadb086@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=48c14f61594bdfadb086 Fixes: 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20250410161117.3519250-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-03-26T16:32:10+00:00

Merge in late fixes to prepare for the 6.15 net-next PR. No conflicts, adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Jakub Kicinski

Merge tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

2025-03-25T15:50:10+00:00

Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2025-03-24 1) Prevent setting high order sequence number bits input in non-ESN mode. From Leon Romanovsky. 2) Support PMTU handling in tunnel mode for packet offload. From Leon Romanovsky. 3) Make xfrm_state_lookup_byaddr lockless. From Florian Westphal. 4) Remove unnecessary NULL check in xfrm_lookup_with_ifid(). From Dan Carpenter. * tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid() xfrm: state: make xfrm_state_lookup_byaddr lockless xfrm: check for PMTU in tunnel mode for packet offload xfrm: provide common xdo_dev_offload_ok callback implementation xfrm: rely on XFRM offload xfrm: simplify SA initialization routine xfrm: delay initialization of offload path till its actually requested xfrm: prevent high SEQ input in non-ESN mode ==================== Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski

bonding: check xdp prog when set bond mode

2025-03-25T15:00:09+00:00

Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 ---[ end trace 0000000000000000 ]--- Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Wang Liang Acked-by: Jussi Maki Reviewed-by: Nikolay Aleksandrov Reviewed-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20250321044852.1086551-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-03-13T22:08:11+00:00

Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: tools/testing/selftests/drivers/net/ping.py 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver") https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/ net/core/devmem.c a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations") https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/ Adjacent changes: tools/testing/selftests/net/Makefile 6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.") 2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4") drivers/net/ethernet/broadcom/bnxt/bnxt.c 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Paolo Abeni

bonding: fix incorrect MAC address setting to receive NS messages

2025-03-11T12:19:27+00:00

When validation on the backup slave is enabled, we need to validate the Neighbor Solicitation (NS) messages received on the backup slave. To receive these messages, the correct destination MAC address must be added to the slave. However, the target in bonding is a unicast address, which we cannot use directly. Instead, we should first convert it to a Solicited-Node Multicast Address and then derive the corresponding MAC address. Fix the incorrect MAC address setting on both slave_set_ns_maddr() and slave_set_ns_maddrs(). Since the two function names are similar. Add some description for the functions. Also only use one mac_addr variable in slave_set_ns_maddr() to save some code and logic. Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device") Acked-by: Jay Vosburgh Reviewed-by: Nikolay Aleksandrov Signed-off-by: Hangbin Liu Reviewed-by: Simon Horman Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni