kernel/git/stable/linux.git/drivers/net/can/slcan.c, branch master

can: slcan: move driver into separate sub directory

2022-07-03T09:34:44+00:00

This patch moves the slcan driver into a separate directory, a later patch will add more files. Link: https://lore.kernel.org/all/20220628163137.413025-10-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Signed-off-by: Marc Kleine-Budde

can: slcan: send the open/close commands to the adapter

2022-07-03T09:34:41+00:00

In case the bitrate has been set via ip tool, this patch changes the driver to send the open ("O\r") and close ("C\r) commands to the adapter. Link: https://lore.kernel.org/all/20220628163137.413025-9-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: set bitrate by CAN device driver API

2022-07-03T09:34:38+00:00

It allows to set the bitrate via ip tool, as it happens for the other CAN device drivers. It still remains possible to set the bitrate via slcand or slcan_attach utilities. In case the ip tool is used, the driver will send the serial command to the adapter. Link: https://lore.kernel.org/all/20220628163137.413025-8-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: allow to send commands to the adapter

2022-07-03T09:34:34+00:00

This is a preparation patch for the upcoming support to change the bitrate via ip tool, reset the adapter error states via the ethtool API and, more generally, send commands to the adapter. Since the close command (i. e. "C\r") will be sent in the ndo_stop() where netif_running() returns false, a new flag bit (i. e. SLF_XCMD) for serial transmission has to be added. Link: https://lore.kernel.org/all/20220628163137.413025-7-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: use CAN network device driver API

2022-07-03T09:34:28+00:00

As suggested by commit [1], now the driver uses the functions and the data structures provided by the CAN network device driver interface. Currently the driver doesn't implement a way to set bitrate for SLCAN based devices via ip tool, so you'll have to do this by slcand or slcan_attach invocation through the -sX parameter: - slcan_attach -f -s6 -o /dev/ttyACM0 - slcand -f -s8 -o /dev/ttyUSB0 where -s6 in will set adapter's bitrate to 500 Kbit/s and -s8 to 1Mbit/s. See the table below for further CAN bitrates: - s0 -> 10 Kbit/s - s1 -> 20 Kbit/s - s2 -> 50 Kbit/s - s3 -> 100 Kbit/s - s4 -> 125 Kbit/s - s5 -> 250 Kbit/s - s6 -> 500 Kbit/s - s7 -> 800 Kbit/s - s8 -> 1000 Kbit/s In doing so, the struct can_priv::bittiming.bitrate of the driver is not set and since the open_candev() checks that the bitrate has been set, it must be a non-zero value, the bitrate is set to a fake value (-1U) before it is called. Using the rtnl_lock()/rtnl_unlock() functions has become a bit more tricky as the register_candev() function indirectly calls rtnl_lock() via register_netdev(). To avoid a deadlock it is therefore necessary to call rtnl_unlock() before calling register_candev(). The same goes for the unregister_candev() function. [1] commit 39549eef3587f ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20220628163137.413025-6-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: use the alloc_can_skb() helper

2022-07-03T09:34:21+00:00

It is used successfully by most (if not all) CAN device drivers. It allows to remove replicated code. Link: https://lore.kernel.org/all/20220628163137.413025-4-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: use netdev helpers to print out messages

2022-07-03T09:34:18+00:00

Replace printk() calls with corresponding netdev helpers. Link: https://lore.kernel.org/all/20220628163137.413025-3-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: use the BIT() helper

2022-07-03T09:34:13+00:00

Use the BIT() helper instead of an explicit shift. Link: https://lore.kernel.org/all/20220628163137.413025-2-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi Tested-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde

can: slcan: slc_xmit(): use can_dropped_invalid_skb() instead of manual check

2022-05-16T20:06:51+00:00

slcan does a manual check in slc_xmit() to verify if the skb is valid. This check is incomplete, use instead can_dropped_invalid_skb(). Link: https://lore.kernel.org/all/20220514141650.1109542-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: Use netif_rx().

2022-03-06T11:05:31+00:00

Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marc Kleine-Budde Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: linux-can@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Acked-by: Oliver Hartkopp Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller