kernel/git/stable/linux.git/drivers/net/can, branch linux-4.19.y

can: c_can: fix {rx,tx}_errors statistics

2024-11-17T13:58:05+00:00

[ Upstream commit 4d6d26537940f3b3e17138987ed9e4a334780bf7 ] The c_can_handle_bus_err() function was incorrectly incrementing only the receive error counter, even in cases of bit or acknowledgment errors that occur during transmission. The patch fixes the issue by incrementing the appropriate counter based on the type of error. Fixes: 881ff67ad450 ("can: c_can: Added support for Bosch C_CAN controller") Signed-off-by: Dario Binacchi Link: https://patch.msgid.link/20241014135319.2009782-1-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: kvaser_usb: fix return value for hif_usb_send_regout

2024-07-27T08:33:42+00:00

[ Upstream commit 0d34d8163fd87978a6abd792e2d8ad849f4c3d57 ] As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error. Signed-off-by: Chen Ni Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct

2024-07-18T09:39:35+00:00

commit 19d5b2698c35b2132a355c67b4d429053804f8cc upstream. Explicitly set the 'family' driver_info struct member for leafimx. Previously, the correct operation relied on KVASER_LEAF being the first defined value in enum kvaser_usb_leaf_family. Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression") Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()

2023-11-20T09:29:17+00:00

[ Upstream commit 6841cab8c4504835e4011689cbdb3351dec693fd ] This race condition was discovered while updating the at91_can driver to use can_bus_off(). The following scenario describes how the converted at91_can driver would behave. When a CAN device goes into BUS-OFF state, the driver usually stops/resets the CAN device and calls can_bus_off(). This function sets the netif carrier to off, and (if configured by user space) schedules a delayed work that calls can_restart() to restart the CAN device. The can_restart() function first checks if the carrier is off and triggers an error message if the carrier is OK. Then it calls the driver's do_set_mode() function to restart the device, then it sets the netif carrier to on. There is a race window between these two calls. The at91 CAN controller (observed on the sama5d3, a single core 32 bit ARM CPU) has a hardware limitation. If the device goes into bus-off while sending a CAN frame, there is no way to abort the sending of this frame. After the controller is enabled again, another attempt is made to send it. If the bus is still faulty, the device immediately goes back to the bus-off state. The driver calls can_bus_off(), the netif carrier is switched off and another can_restart is scheduled. This occurs within the race window before the original can_restart() handler marks the netif carrier as OK. This would cause the 2nd can_restart() to be called with an OK netif carrier, resulting in an error message. The flow of the 1st can_restart() looks like this: can_restart() // bail out if netif_carrier is OK netif_carrier_ok(dev) priv->do_set_mode(dev, CAN_MODE_START) // enable CAN controller // sama5d3 restarts sending old message // CAN devices goes into BUS_OFF, triggers IRQ // IRQ handler start at91_irq() at91_irq_err_line() can_bus_off() netif_carrier_off() schedule_delayed_work() // IRQ handler end netif_carrier_on() The 2nd can_restart() will be called with an OK netif carrier and the error message will be printed. To close the race window, first set the netif carrier to on, then restart the controller. In case the restart fails with an error code, roll back the netif carrier to off. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-2-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: dev: can_restart(): don't crash kernel if carrier is OK

2023-11-20T09:29:17+00:00

[ Upstream commit fe5c9940dfd8ba0c73672dddb30acd1b7a11d4c7 ] During testing, I triggered a can_restart() with the netif carrier being OK [1]. The BUG_ON, which checks if the carrier is OK, results in a fatal kernel crash. This is neither helpful for debugging nor for a production system. [1] The root cause is a race condition in can_restart() which will be fixed in the next patch. Do not crash the kernel, issue an error message instead, and continue restarting the CAN device anyway. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-1-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: dev: move driver related infrastructure into separate subdir

2023-11-20T09:29:17+00:00

[ Upstream commit 3e77f70e734584e0ad1038e459ed3fd2400f873a ] This patch moves the CAN driver related infrastructure into a separate subdir. It will be split into more files in the coming patches. Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/r/20210111141930.693847-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Stable-dep-of: fe5c9940dfd8 ("can: dev: can_restart(): don't crash kernel if carrier is OK") Signed-off-by: Sasha Levin

can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

2023-09-23T08:48:00+00:00

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ] In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented. Fix this by first incrementing the error counters and then allocate the skb. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

2023-08-11T09:45:33+00:00

commit f8a2da6ec2417cca169fa85a8ab15817bccbb109 upstream. After an initial link up the CAN device is in ERROR-ACTIVE mode. Due to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to STOPPED after a link down: | ip link set dev can0 up | ip link set dev can0 down | ip --details link show can0 | 13: can0: mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can state ERROR-ACTIVE restart-ms 1000 Add missing assignment of CAN_STATE_STOPPED in gs_can_close(). Cc: stable@vger.kernel.org Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-fix-can-state-v1-1-f19738ae2c23@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

treewide: Remove uninitialized_var() usage

2023-08-11T09:45:01+00:00

commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var$([^$]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe # IB Acked-by: Kalle Valo # wireless drivers Reviewed-by: Chao Yu # erofs Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman

can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error

2023-03-11T15:31:38+00:00

[ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ] Move the supply for cf->data[3] (bit stream position of CAN error), in case of a bus- or protocol-error, outside of the "switch (ecc & SJA1000_ECC_MASK){}"-statement, because this bit stream position is independent of the error type. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin