kernel/git/stable/linux.git/drivers/net/dsa, branch linux-5.8.y

net: dsa: rtl8366rb: Support all 4096 VLANs

2020-10-29T09:07:42+00:00

[ Upstream commit a7920efdd86d8a0d74402dbc80ead03b023294ba ] There is an off-by-one error in rtl8366rb_is_vlan_valid() making VLANs 0..4094 valid while it should be 1..4095. Fix it. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: rtl8366: Skip PVID setting if not requested

2020-10-29T09:07:41+00:00

[ Upstream commit 3dfe8dde093a07e82fa472c0f8c29a7f6a2006a5 ] We go to lengths to determine whether the PVID should be set for this port or not, and then fail to take it into account. Fix this oversight. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: rtl8366: Refactor VLAN/PVID init

2020-10-29T09:07:41+00:00

[ Upstream commit 7e1301ed1881447d2a25f9c6423738c33cbca133 ] The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code. This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement. In the process, add some better comments and debug prints so people who read the code understand what is going on. Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: rtl8366: Check validity of passed VLANs

2020-10-29T09:07:40+00:00

[ Upstream commit 6641a2c42b0a307b7638d10e5d4b90debc61389d ] The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid VLANs tossed at it, especially VLAN0, something the hardware and driver cannot handle. Check validity and bail out like we do in the other callbacks. Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: fix race condition

2020-10-29T09:06:59+00:00

[ Upstream commit 8098bd69bc4e925070313b1b95d03510f4f24738 ] Between queuing the delayed work and finishing the setup of the dsa ports, the process may sleep in request_module() (via phy_device_create()) and the queued work may be executed prior to the switch net devices being registered. In ksz_mib_read_work(), a NULL dereference will happen within netof_carrier_ok(dp->slave). Not queuing the delayed work in ksz_init_mib_timer() makes things even worse because the work will now be queued for immediate execution (instead of 2000 ms) in ksz_mac_link_down() via dsa_port_link_register_of(). Call tree: ksz9477_i2c_probe() \--ksz9477_switch_register() \--ksz_switch_register() +--dsa_register_switch() | \--dsa_switch_probe() | \--dsa_tree_setup() | \--dsa_tree_setup_switches() | +--dsa_switch_setup() | | +--ksz9477_setup() | | | \--ksz_init_mib_timer() | | | |--/* Start the timer 2 seconds later. */ | | | \--schedule_delayed_work(&dev->mib_read, msecs_to_jiffies(2000)); | | \--__mdiobus_register() | | \--mdiobus_scan() | | \--get_phy_device() | | +--get_phy_id() | | \--phy_device_create() | | |--/* sleeping, ksz_mib_read_work() can be called meanwhile */ | | \--request_module() | | | \--dsa_port_setup() | +--/* Called for non-CPU ports */ | +--dsa_slave_create() | | +--/* Too late, ksz_mib_read_work() may be called beforehand */ | | \--port->slave = ... | ... | +--Called for CPU port */ | \--dsa_port_link_register_of() | \--ksz_mac_link_down() | +--/* mib_read must be initialized here */ | +--/* work is already scheduled, so it will be executed after 2000 ms */ | \--schedule_delayed_work(&dev->mib_read, 0); \-- /* here port->slave is setup properly, scheduling the delayed work should be safe */ Solution: 1. Do not queue (only initialize) delayed work in ksz_init_mib_timer(). 2. Only queue delayed work in ksz_mac_link_down() if init is completed. 3. Queue work once in ksz_switch_register(), after dsa_register_switch() has completed. Fixes: 7c6ff470aa86 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by: Christian Eggers Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: extend watermark encoding function

2020-10-14T09:55:58+00:00

[ Upstream commit aa92d836d5c40a7e21e563a272ad177f1bfd44dd ] The ocelot_wm_encode function deals with setting thresholds for pause frame start and stop. In Ocelot and Felix the register layout is the same, but for Seville, it isn't. The easiest way to accommodate Seville hardware configuration is to introduce a function pointer for setting this up. Signed-off-by: Maxim Kochetkov Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: felix: convert TAS link speed based on phylink speed

2020-10-14T09:55:53+00:00

[ Upstream commit dba1e4660a87927bdc03c23e36fd2c81a16a7ab1 ] state->speed holds a value of 10, 100, 1000 or 2500, but QSYS_TAG_CONFIG_LINK_SPEED expects a value of 0, 1, 2, 3. So convert the speed to a proper value. Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload") Signed-off-by: Xiaoliang Yang Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries

2020-10-07T06:02:50+00:00

[ Upstream commit 8b9e03cd08250c60409099c791e858157838d9eb ] Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT, L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from matching on src_port and dst_port for TCP and UDP packets. Signed-off-by: Xiaoliang Yang Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8795: really set the correct number of ports

2020-09-26T16:05:28+00:00

[ Upstream commit fd944dc24336922656a48f4608bfb41abdcdc4aa ] The KSZ9477 and KSZ8795 use the port_cnt field differently: For the KSZ9477, it includes the CPU port(s), while for the KSZ8795, it doesn't. It would be a good cleanup to make the handling of both drivers match, but as a first step, fix the recently broken assignment of num_ports in the KSZ8795 driver (which completely broke probing, as the CPU port index was always failing the num_ports check). Fixes: af199a1a9cb0 ("net: dsa: microchip: set the correct number of ports") Signed-off-by: Matthias Schiffer Reviewed-by: Codrin Ciubotariu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: rtl8366: Properly clear member config

2020-09-26T16:05:23+00:00

[ Upstream commit 4ddcaf1ebb5e4e99240f29d531ee69d4244fe416 ] When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman