kernel/git/stable/linux.git/drivers/net/ethernet, branch linux-4.18.y

net: bcmgenet: fix OF child-node lookup

2018-11-13T19:12:48+00:00

commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac upstream. Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Cc: stable # 3.15 Cc: David S. Miller Reviewed-by: Florian Fainelli Signed-off-by: Johan Hovold Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

net: stmmac: dwmac-sun8i: fix OF child-node lookup

2018-11-13T19:12:28+00:00

[ Upstream commit ac63043d8cb5503c7e0fe110f947eacf2663804e ] Use the new of_get_compatible_child() helper to lookup the mdio-internal child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the mdio-mux node). Fortunately, this was inadvertently balanced by a failure to drop the mdio-mux reference after lookup. While at it, also fix the related mdio-internal- and phy-node reference leaks. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Tested-by: Corentin Labbe Cc: Andrew Lunn Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Cc: Jose Abreu Cc: David S. Miller Signed-off-by: Johan Hovold Signed-off-by: Rob Herring Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ixgbevf: VF2VF TCP RSS

2018-11-13T19:12:27+00:00

[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ] While VF2VF with RSS communication, RSS Type were wrongly recognized and RSS hash was not calculated as it should be. Packets was distributed on various queues by accident. This commit fixes that behaviour and causes proper RSS Type recognition. Signed-off-by: Sebastian Basierski Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ixgbe: disallow IPsec Tx offload when in SR-IOV mode

2018-11-13T19:12:27+00:00

[ Upstream commit 47b6f50077e68bcd544f657526dad4bfdce7e87d ] There seems to be a problem in the x540's internal switch wherein if SR-IOV mode is enabled and an offloaded IPsec packet is sent to a local VF, the packet is silently dropped. This might never be a problem as it is somewhat a corner case, but if someone happens to be using IPsec offload from the PF to a VF that just happens to get migrated to the local box, communication will mysteriously fail. Not good. A simple way to protect from this is to simply not allow any IPsec offloads for outgoing packets when num_vfs != 0. This doesn't help any offloads that were created before SR-IOV was enabled, but we'll get to that later. Signed-off-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: hns3: Fix for vf vlan delete failed problem

2018-11-13T19:12:26+00:00

[ Upstream commit 41dafea2af781d8e3ab8626d236b52e4172905a3 ] There are only 128 entries in vf vlan table, if user has added more than 128 vlan, fw will ignore it and disable the vf vlan table. So when user deletes the vlan entry that has not been set to vf vlan table, fw will return not found result and driver treat that as error, which will cause vlan delete failed problem. This patch fixes it by returning ok when fw returns not found result. Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full") Signed-off-by: Yunsheng Lin Signed-off-by: Peng Li Signed-off-by: Salil Mehta Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: hns3: Fix ping exited problem when doing lp selftest

2018-11-13T19:12:26+00:00

[ Upstream commit 3f8601f0f5716c4e63a9f215bbc581df42859d61 ] When ping is runnig and user executes the loopback selftest, the ping cmd will stop and exit. This patch fixes it by using the hns3_nic_net_open/stop to offline the netdev when doing loopback selftest. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin Signed-off-by: Peng Li Signed-off-by: Salil Mehta Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: hns3: Preserve vlan 0 in hardware table

2018-11-13T19:12:26+00:00

[ Upstream commit daaa8521760ee4d4e65f309c4c37b3a1e58c9d4e ] When netdev is down, the stack will delete the vlan from hardware including vlan0, which will cause problem when doing loopback selftest when netdev is down. This patch fixes it by always preserving vlan 0 in hardware, because vlan 0 is defalut vlan, which should always be in hardware. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin Signed-off-by: Peng Li Signed-off-by: Salil Mehta Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: hns3: Set STATE_DOWN bit of hdev state when stopping net

2018-11-13T19:12:24+00:00

[ Upstream commit 2f7e489611bc685b8e00aba436032a8aac6cac57 ] We clear STATE_DOWN bit of hdev state when starting net, but do not set it again when stopping net. It causes that the net is down, but hdev state is still up. STATE_DOWN bit of hdev state should be set when stopping net. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang Signed-off-by: Peng Li Signed-off-by: Salil Mehta Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: hns3: Check hdev state when getting link status

2018-11-13T19:12:24+00:00

[ Upstream commit 582d37bbb613b8ad86bf82845d3a74a02a5a0fa1 ] By default, HW link status is up. If hclge_update_link_status is called before net up, driver will print "link up". It is not suitable. hdev state check is needed when getting link status. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang Signed-off-by: Peng Li Signed-off-by: Salil Mehta Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: hns3: Fix ets validate issue

2018-11-13T19:12:24+00:00

[ Upstream commit adefc0a2ff465f4ac4a88450fe69d336c8b074c5 ] There is a defect in hclge_ets_validate(). If each member of tc_tsa is not IEEE_8021QAZ_TSA_ETS, the variable total_ets_bw won't be updated. In this case, the check for value of total_ets_bw will fail. This patch fixes it by checking total_ets_bw only after it has been updated. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Jian Shen Signed-off-by: Peng Li Signed-off-by: Salil Mehta Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman