kernel/git/stable/linux.git/drivers/net/fddi, branch linux-4.10.y

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

net: fddi: skfp: use %p format specifier for addresses rather than %x

2016-12-21T20:34:51+00:00

Trivial fix: Addresses should be printed using the %p format specifier rather than using %x. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

net: use core MTU range checking in misc drivers

2016-10-20T18:51:10+00:00

firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter CC: Faisal Latif CC: linux-rdma@vger.kernel.org CC: Cliff Whickman CC: Robin Holt CC: Jes Sorensen CC: Marek Lindner CC: Simon Wunderlich CC: Antonio Quartulli CC: Sathya Prakash CC: Chaitra P B CC: Suganath Prabu Subramani CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel CC: Felipe Balbi CC: Arvid Brodin CC: Remi Denis-Courmont Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller

net: skfb: remove obsolete -I cflag

2016-06-16T05:06:06+00:00

The skfp driver has been moved to drivers/net/fddi/skfp a long time ago, but we still attempt to include headers from the old location, which causes a warning when building with W=1: cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] Clearly this include directive is not needed any more, so we can just remove it now. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller

defxx: fix build warning

2016-01-25T18:51:52+00:00

We are getting many build warnings about: 'bar_start' may be used uninitialized and 'bar_len' may be used uninitialized They are not actually uninitialized as dfx_get_bars() will initialize them properly. But still lets have them initialized just to satisfy the compiler (gcc 4.8.2). Signed-off-by: Sudip Mukherjee Acked-by: Maciej W. Rozycki Signed-off-by: David S. Miller

net/fddi: remove HWM_REVERSE() macro

2015-08-14T04:12:17+00:00

HWM_REVERSE() macro is unused, remove it. Signed-off-by: yalin wang Signed-off-by: David S. Miller

fddi: print an address with %p format specifier rather than %x

2015-06-07T07:31:22+00:00

The debug is printing the struct smt_header * address using the %x format specifier. Fix it to use %p instead. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

net: fddi: skfp: smt.c: Remove unused function

2015-01-02T21:36:07+00:00

Remove the function smt_ifconfig() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: David S. Miller

defxx: Clean up DEFEA resource management

2014-11-21T21:37:13+00:00

Reserve DEFEA resources according to actual use. There are three regions, for the ESIC ASIC's CSRs, for the discrete Burst Holdoff register, and for the PDQ ASIC's CSRs. The latter is mapped in the memory or port I/O address space depending on configuration. The two formers are hardwired and always mapped in the port I/O address space. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: Disable DEFEA's ESIC I/O decoding on shutdown

2014-11-21T21:37:13+00:00

Make sure the option card does not respond after shutdown by disabling it via ESIC's Expansion Board Control register. Also disable memory and port I/O decoders, the latter in particular to disable slot-specific I/O decoding that otherwise remains active even in the board is disabled. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller