kernel/git/stable/linux.git/drivers/net/macsec.c, branch linux-6.0.y

net: macsec: fix net device access prior to holding a lock

2022-12-31T12:26:37+00:00

[ Upstream commit f3b4a00f0f62da252c598310698dfc82ef2f2e2e ] Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem Signed-off-by: Emeel Hakim Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macsec: add missing attribute validation for offload

2022-12-14T10:41:05+00:00

[ Upstream commit 38099024e51ee37dee5f0f577ca37175c932e3f7 ] Add missing attribute validation for IFLA_MACSEC_OFFLOAD to the netlink policy. Fixes: 791bb3fcafce ("net: macsec: add support for specifying offload upon link creation") Signed-off-by: Emeel Hakim Reviewed-by: Jiri Pirko Reviewed-by: Sabrina Dubroca Link: https://lore.kernel.org/r/20221207101618.989-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macsec: Fix invalid error code set

2022-12-02T16:43:05+00:00

[ Upstream commit 7cef6b73fba96abef731a53501924fc3c4a0f947 ] 'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: YueHaibing Reviewed-by: Saeed Mahameed Reviewed-by: Antoine Tenart Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Revert "net: macsec: report real_dev features when HW offloading is enabled"

2022-12-02T16:43:00+00:00

[ Upstream commit 8bcd560ae8784da57c610d857118c5d6576b1a8f ] This reverts commit c850240b6c4132574a00f2da439277ab94265b66. That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP) were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. Example perf trace when running ip link add link eni1np1 type macsec port 4 offload mac ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869 xfrm_dev_event+0x3a notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD) notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a dev->features includes NETIF_F_HW_ESP (0x04000000000000), so xfrm_api_check returns NOTIFY_BAD because we don't have dev->xfrmdev_ops on the macsec device. We could probably propagate GSO and a few other features from the lower device, similar to macvlan. This will be done in a future patch. Signed-off-by: Sabrina Dubroca Reviewed-by: Antoine Tenart Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

macsec: clear encryption keys from the stack after setting up offload

2022-11-16T09:03:53+00:00

[ Upstream commit aaab73f8fba4fd38f4d2617440d541a1c334e819 ] macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack offloading context to pass it to the drivers, but leaves it there when it's done. Clear it with memzero_explicit as soon as it's not needed anymore. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca Reviewed-by: Antoine Tenart Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

macsec: fix detection of RXSCs when toggling offloading

2022-11-16T09:03:53+00:00

[ Upstream commit 80df4706357a5a06bbbc70273bf2611df1ceee04 ] macsec_is_configured incorrectly uses secy->n_rx_sc to check if some RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but there can also be inactive SCs as well, which may be stored in the driver (in case we're disabling offloading), or would have to be pushed to the device (in case we're trying to enable offloading). As long as RXSCs active on creation and never turned off, the issue is not visible. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Sabrina Dubroca Reviewed-by: Antoine Tenart Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

macsec: fix secy->n_rx_sc accounting

2022-11-16T09:03:53+00:00

[ Upstream commit 73a4b31c9d11f98ae3bc5286d5382930adb0e9c7 ] secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Reviewed-by: Antoine Tenart Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

macsec: delete new rxsc when offload fails

2022-11-16T09:03:53+00:00

[ Upstream commit 93a30947821c203d08865c4e17ea181c9668ce52 ] Currently we get an inconsistent state: - netlink returns the error to userspace - the RXSC is installed but not offloaded Then the device could get confused when we try to add an RXSA, because the RXSC isn't supposed to exist. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca Reviewed-by: Antoine Tenart Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

Revert "net: macsec: update SCI upon MAC address change."

2022-08-19T23:50:36+00:00

This reverts commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823. Commit 6fc498bc8292 states: SCI should be updated, because it contains MAC in its first 6 octets. That's not entirely correct. The SCI can be based on the MAC address, but doesn't have to be. We can also use any 64-bit number as the SCI. When the SCI based on the MAC address, it uses a 16-bit "port number" provided by userspace, which commit 6fc498bc8292 overwrites with 1. In addition, changing the SCI after macsec has been setup can just confuse the receiver. If we configure the RXSC on the peer based on the original SCI, we should keep the same SCI on TX. When the macsec device is being managed by a userspace key negotiation daemon such as wpa_supplicant, commit 6fc498bc8292 would also overwrite the SCI defined by userspace. Fixes: 6fc498bc8292 ("net: macsec: update SCI upon MAC address change.") Signed-off-by: Sabrina Dubroca Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski

macsec: Fix traffic counters/statistics

2022-08-10T12:45:06+00:00

OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager Signed-off-by: David S. Miller