kernel/git/stable/linux.git/drivers/net/team, branch linux-4.10.y

team: use ETH_MAX_MTU as max mtu

2017-03-22T11:57:00+00:00

[ Upstream commit 3331aa378e9bcbd0d16de9034b0c20f4050e26b4 ] This restores the ability to set a team device's mtu to anything higher than 1500. Similar to the reported issue with bonding, the team driver calls ether_setup(), which sets an initial max_mtu of 1500, while the underlying hardware can handle something much larger. Just set it to ETH_MAX_MTU to support all possible values, and the limitations of the underlying devices will prevent setting anything too large. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") CC: Cong Wang CC: Jiri Pirko CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

genetlink: mark families as __ro_after_init

2016-10-27T20:16:09+00:00

Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

genetlink: statically initialize families

2016-10-27T20:16:09+00:00

Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

genetlink: no longer support using static family IDs

2016-10-27T20:16:09+00:00

Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

team: loadbalance: push lacpdus to exact delivery

2016-08-26T20:08:59+00:00

When team is in bridge and LACP is utilized, LACPDU packets are pushed to userspace using raw socket and there they are processed. However, since 8626c56c8279b, LACPDU skbs are dropped by bridge rx_handler so they never reach packet handlers in rx path. Fix this by explicity treat LACPDUs to be pushed to exact delivery in team rx_handler. Reported-by: Ido Schimmel Fixes: 8626c56c8279b ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: introduce default neigh_construct/destroy ndo calls for L2 upper devices

2016-07-05T16:06:28+00:00

L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-06-30T09:03:36+00:00

Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller

team: Fix possible deadlock during team enslave

2016-06-22T20:31:03+00:00

Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

net: add netdev_lockdep_set_classes() helper

2016-06-09T20:28:37+00:00

It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net_sched: transform qdisc running bit into a seqcount

2016-06-07T23:37:13+00:00

Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet Cc: Cong Wang Cc: Jamal Hadi Salim Signed-off-by: David S. Miller