kernel/git/stable/linux.git/drivers/net/tulip/de2104x.c, branch master

ewrk3/tulip: Move the DEC - Tulip drivers

2011-08-12T07:21:25+00:00

Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/ and make the necessary Kconfig and Makefile changes. The Digital Equioment (DEC) driver ewrk3 was moved into drivers/net/ethernet/dec/ and the remaining drivers (Tulip) were moved into drivers/net/ethernet/dec/tulip/ CC: Tobias Ringstrom CC: Grant Grundler CC: David Davies Signed-off-by: Jeff Kirsher Acked-by: Grant Grundler

net: remove interrupt.h inclusion from netdevice.h

2011-06-07T05:55:11+00:00

* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller

tulip: Use pr_ where appropriate

2011-05-09T19:51:16+00:00

Use the current logging styles. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

tulip: Convert uses of KERN_DEBUG

2011-05-09T19:51:15+00:00

Convert logging messages to more current styles. Added -DDEBUG to Makefile to maintain current message logging. This could be converted to a specific CONFIG_TULIP_DEBUG option. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

tulip: Convert printks to netdev_

2011-05-09T19:51:15+00:00

Use the current more descriptive logging styles. Add pr_fmt and remove PFX where appropriate. Use netif_, netdev_ Indent a few blocks in xircom_cb where appropriate. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

tulip/de2104x: don't report different speeds depending on port type

2011-04-29T21:03:02+00:00

Initial driver reported different speeds depending on the port being used. This advertises the speed to be 10Mbps in any case, which is what it actually is on the wire. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

ethtool: cosmetic: Use ethtool ethtool_cmd_speed API

2011-04-29T21:03:01+00:00

This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny Signed-off-by: David S. Miller

ethtool: Use full 32 bit speed range in ethtool's set_settings

2011-04-29T21:03:00+00:00

This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

drivers/net/*/: Use static const

2010-12-21T10:16:10+00:00

Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches

de2104x: fix panic on load

2010-11-04T01:50:06+00:00

Its now illegal to call netif_stop_queue() before register_netdev() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller