kernel/git/stable/linux.git/drivers/net/usb, branch linux-4.12.y

usb: qmi_wwan: add D-Link DWM-222 device ID

2017-08-25T00:15:05+00:00

commit bed9ff165960921303a100228585f2d1691b42eb upstream. Signed-off-by: Hector Martin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

qmi_wwan: fix NULL deref on disconnect

2017-08-13T02:34:27+00:00

[ Upstream commit bbae08e592706dc32e5c7c97827b13c1c178668b ] qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by: Nathaniel Roach Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: usb: asix88179_178a: Add support for the Belkin B2B128

2017-06-27T19:46:07+00:00

The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: Andrew F. Davis Signed-off-by: David S. Miller

qmi_wwan: new Telewell and Sierra device IDs

2017-06-13T17:20:42+00:00

A new Sierra Wireless EM7305 device ID used in a Toshiba laptop, and two Longcheer device IDs entries used by Telewell TW-3G HSPA+ branded modems. Reported-by: Petr Kloc Reported-by: Teemu Likonen Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

r8152: give the device version

2017-06-13T16:50:15+00:00

Getting the device version out of the driver really aids debugging. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller

net: Fix inconsistent teardown and release of private netdev state.

2017-06-07T19:53:24+00:00

Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller

cdc-ether: divorce initialisation with a filter reset and a generic method

2017-05-23T15:01:28+00:00

Some devices need their multicast filter reset but others are crashed by that. So the methods need to be separated. Signed-off-by: Oliver Neukum Reported-by: "Ridgway, Keith" Signed-off-by: David S. Miller

smsc95xx: Support only IPv4 TCP/UDP csum offload

2017-05-21T17:31:48+00:00

When TX checksum offload is used, if the computed checksum is 0 the LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4 UDP checksum, it indicates to receiver that no checksum is calculated. Under ipv6, UDP checksum yields a result of zero must be changed to 0xffff. Hence disabling checksum offload for ipv6 packets. Signed-off-by: Nisar Sayed Reported-by: popcorn mix Signed-off-by: David S. Miller

qmi_wwan: add another Lenovo EM74xx device ID

2017-05-18T14:24:55+00:00

In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use a new USB device ID for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

net: ch9200: add missing USB-descriptor endianness conversions

2017-05-12T16:15:46+00:00

Add the missing endianness conversions to a debug statement printing the USB device-descriptor idVendor and idProduct fields during probe. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller