kernel/git/stable/linux.git/drivers/net/usb, branch linux-6.7.y

sr9800: Add check for usbnet_get_endpoints

2024-03-26T22:18:24+00:00

[ Upstream commit 07161b2416f740a2cb87faa5566873f401440a61 ] Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. Signed-off-by: Chen Ni Reviewed-by: Simon Horman Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: smsc95xx: add support for SYS TEC USB-SPEmodule1

2024-03-26T22:17:54+00:00

[ Upstream commit 45532b21dc2a692444b6ad5f71c253cca53e8103 ] This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pair. Signed-off-by: Andre Werner Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: lan78xx: fix runtime PM count underflow on link stop

2024-03-15T14:48:14+00:00

[ Upstream commit 1eecc7ab82c42133b748e1895275942a054a7f67 ] Current driver has some asymmetry in the runtime PM calls. On lan78xx_open() it will call usb_autopm_get() and unconditionally usb_autopm_put(). And on lan78xx_stop() it will call only usb_autopm_put(). So far, it was working only because this driver do not activate autosuspend by default, so it was visible only by warning "Runtime PM usage count underflow!". Since, with current driver, we can't use runtime PM with active link, execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise, keep ref counting high as long as interface is open. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Oleksij Rempel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: lan78xx: fix "softirq work is pending" error

2024-03-06T14:53:50+00:00

[ Upstream commit e3d5d70cb483df8296dd44e9ae3b6355ef86494c ] Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #08!!! Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: dm9601: fix wrong return value in dm9601_mdio_read

2024-03-06T14:53:50+00:00

[ Upstream commit c68b2c9eba38ec3f60f4894b189090febf4d8d22 ] The MII code does not check the return value of mdio_read (among others), and therefore no error code should be sent. A previous fix to the use of an uninitialized variable propagates negative error codes, that might lead to wrong operations by the MII library. An example of such issues is the use of mii_nway_restart by the dm9601 driver. The mii_nway_restart function does not check the value returned by mdio_read, which in this case might be a negative number which could contain the exact bit the function checks (BMCR_ANENABLE = 0x1000). Return zero in case of error, as it is common practice in users of mdio_read to avoid wrong uses of the return value. Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read") Signed-off-by: Javier Carrasco Reviewed-by: Simon Horman Reviewed-by: Peter Korsgaard Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected

2024-03-06T14:53:50+00:00

[ Upstream commit 0e67899abfbfdea0c3c0ed3fd263ffc601c5c157 ] Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: ax88179_178a: avoid two consecutive device resets

2024-02-05T20:16:50+00:00

[ Upstream commit d2689b6a86b9d23574bd4b654bf770b6034e2c7e ] The device is always reset two consecutive times (ax88179_reset is called twice), one from usbnet_probe during the device binding and the other from usbnet_open. Remove the non-necessary reset during the device binding and let the reset operation from open to keep the normal behavior (tested with generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device). Reported-by: Herb Wei Tested-by: Herb Wei Signed-off-by: Jose Ignacio Tornos Martinez Link: https://lore.kernel.org/r/20231120121239.54504-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Merge tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-01-05T00:34:50+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. We haven't accumulated much over the break. If it wasn't for the uninterrupted stream of fixes for Intel drivers this PR would be very slim. There was a handful of user reports, however, either they stood out because of the lower traffic or users have had more time to test over the break. The ones which are v6.7-relevant should be wrapped up. Current release - regressions: - Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum required", it caused issues on networks where routers send prefixes with preferred_lft=0 - wifi: - iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock - mac80211: fix re-adding debugfs entries during reconfiguration Current release - new code bugs: - tcp: print AO/MD5 messages only if there are any keys Previous releases - regressions: - virtio_net: fix missing dma unmap for resize, prevent OOM Previous releases - always broken: - mptcp: prevent tcp diag from closing listener subflows - nf_tables: - set transport header offset for egress hook, fix IPv4 mangling - skip set commit for deleted/destroyed sets, avoid double deactivation - nat: make sure action is set for all ct states, fix openvswitch matching on ICMP packets in related state - eth: mlxbf_gige: fix receive hang under heavy traffic - eth: r8169: fix PCI error on system resume for RTL8168FP - net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling" * tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net/tcp: Only produce AO/MD5 logs if there are any keys net: Implement missing SO_TIMESTAMPING_NEW cmsg support bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters() net: ravb: Wait for operating mode to be applied asix: Add check for usbnet_get_endpoints octeontx2-af: Re-enable MAC TX in otx2_stop processing octeontx2-af: Always configure NIX TX link credits based on max frame size net/smc: fix invalid link access in dumping SMC-R connections net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues virtio_net: fix missing dma unmap for resize igc: Fix hicredit calculation ice: fix Get link status data length i40e: Restore VF MSI-X state during PCI reset i40e: fix use-after-free in i40e_aqc_add_filters() net: Save and restore msg_namelen in sock_sendmsg netfilter: nft_immediate: drop chain reference counter on error netfilter: nf_nat: fix action not being set for all ct states net: bcmgenet: Fix FCS generation for fragmented skbuffs mptcp: prevent tcp diag from closing listener subflows MAINTAINERS: add Geliang as reviewer for MPTCP ...

asix: Add check for usbnet_get_endpoints

2024-01-04T10:50:57+00:00

Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A") Signed-off-by: Chen Ni Signed-off-by: David S. Miller

net: usb: ax88179_178a: avoid failed operations when device is disconnected

2023-12-15T13:00:03+00:00

When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez Acked-by: Alan Stern Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman