kernel/git/stable/linux.git/drivers/net/vrf.c, branch linux-4.13.y

net: vrf: correct FRA_L3MDEV encode type

2017-11-24T07:35:55+00:00

[ Upstream commit 18129a24983906eaf2a2d448ce4b83e27091ebe2 ] FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On big endian architecture, this results in the l3mdev entry not being added to the FIB rules. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vrf: fix bug_on triggered by rx when destroying a vrf

2017-07-06T15:46:07+00:00

When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Chris Cormier Signed-off-by: Nikolay Aleksandrov Acked-by: David Ahern Signed-off-by: David S. Miller

net: add netlink_ext_ack argument to rtnl_link_ops.validate

2017-06-27T03:13:22+00:00

Add support for extended error reporting. Signed-off-by: Matthias Schiffer Acked-by: David Ahern Signed-off-by: David S. Miller

net: add netlink_ext_ack argument to rtnl_link_ops.newlink

2017-06-27T03:13:21+00:00

Add support for extended error reporting. Signed-off-by: Matthias Schiffer Acked-by: David Ahern Signed-off-by: David S. Miller

net: remove DST_NOCACHE flag

2017-06-18T02:54:01+00:00

DST_NOCACHE flag check has been removed from dst_release() and dst_hold_safe() in a previous patch because all the dst are now ref counted properly and can be released based on refcnt only. Looking at the rest of the DST_NOCACHE use, all of them can now be removed or replaced with other checks. So this patch gets rid of all the DST_NOCACHE usage and remove this flag completely. Signed-off-by: Wei Wang Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller

ipv6: take dst->__refcnt for insertion into fib6 tree

2017-06-18T02:54:00+00:00

In IPv6 routing code, struct rt6_info is created for each static route and RTF_CACHE route and inserted into fib6 tree. In both cases, dst ref count is not taken. As explained in the previous patch, this leads to the need of the dst garbage collector. This patch holds ref count of dst before inserting the route into fib6 tree and properly releases the dst when deleting it from the fib6 tree as a preparation in order to fully get rid of dst gc later. Also, correct fib6_age() logic to check dst->__refcnt to be 1 to indicate no user is referencing the dst. And remove dst_hold() in vrf_rt6_create() as ip6_dst_alloc() already puts dst->__refcnt to 1. Signed-off-by: Wei Wang Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller

networking: make skb_push & __skb_push return void pointers

2017-06-16T15:48:40+00:00

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

net: vrf: Make add_fib_rules per network namespace flag

2017-06-08T23:27:42+00:00

Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata Signed-off-by: David Ahern Signed-off-by: David S. Miller

net: Fix inconsistent teardown and release of private netdev state.

2017-06-07T19:53:24+00:00

Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller

driver: vrf: Fix one possible use-after-free issue

2017-05-11T16:13:11+00:00

The current codes only deal with the case that the skb is dropped, it may meet one use-after-free issue when NF_HOOK returns 0 that means the skb is stolen by one netfilter rule or hook. When one netfilter rule or hook stoles the skb and return NF_STOLEN, it means the skb is taken by the rule, and other modules should not touch this skb ever. Maybe the skb is queued or freed directly by the rule. Now uses the nf_hook instead of NF_HOOK to get the result of netfilter, and check the return value of nf_hook. Only when its value equals 1, it means the skb could go ahead. Or reset the skb as NULL. BTW, because vrf_rcv_finish is empty function, so needn't invoke it even though nf_hook returns 1. But we need to modify vrf_rcv_finish to deal with the NF_STOLEN case. There are two cases when skb is stolen. 1. The skb is stolen and freed directly. There is nothing we need to do, and vrf_rcv_finish isn't invoked. 2. The skb is queued and reinjected again. The vrf_rcv_finish would be invoked as okfn, so need to free the skb in it. Signed-off-by: Gao Feng Signed-off-by: David S. Miller