kernel/git/stable/linux.git/drivers/net/wireless, branch linux-5.13.y

ath9k: fix sleeping in atomic context

2021-09-18T11:42:19+00:00

[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ] The problem is that gpio_free() can sleep and the cfg_soc() can be called with spinlocks held. One problematic call tree is: --> ath_reset_internal() takes &sc->sc_pcu_lock spin lock --> ath9k_hw_reset() --> ath9k_hw_gpio_request_in() --> ath9k_hw_gpio_request() --> ath9k_hw_gpio_cfg_soc() Remove gpio_free(), use error message instead, so we should make sure there is no GPIO conflict. Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(), as gpio_mask will never be set for SOC chips. Signed-off-by: Miaoqing Pan Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin

ath9k: fix OOB read ar9300_eeprom_restore_internal

2021-09-18T11:42:19+00:00

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ] Bad header can have large length field which can cause OOB. cptr is the last bytes for read, and the eeprom is parsed from high to low address. The OOB, triggered by the condition length > cptr could cause memory error with a read on negative index. There are some sanity check around length, but it is not compared with cptr (the remaining bytes). Here, the corrupted/bad EEPROM can cause panic. I was able to reproduce the crash, but I cannot find the log and the reproducer now. After I applied the patch, the bug is no longer reproducible. Signed-off-by: Zekun Shen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home Signed-off-by: Sasha Levin

wcn36xx: Fix missing frame timestamp for beacon/probe-resp

2021-09-18T11:42:19+00:00

[ Upstream commit 8678fd31f2d3eb14f2b8b39c9bc266f16fa24b22 ] When receiving a beacon or probe response, we should update the boottime_ns field which is the timestamp the frame was received at. (cf mac80211.h) This fixes a scanning issue with Android since it relies on this timestamp to determine when the AP has been seen for the last time (via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter). Signed-off-by: Loic Poulain Reviewed-by: Bryan O'Donoghue Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1629992768-23785-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Sasha Levin

iwlwifi: mvm: Fix scan channel flags settings

2021-09-18T11:42:19+00:00

[ Upstream commit 090f1be3abf3069ef856b29761f181808bf55917 ] The iwl_mvm_scan_ch_n_aps_flag() is called with a variable before the value of the variable is set. Fix it. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: fw: correctly limit to monitor dump

2021-09-18T11:42:18+00:00

[ Upstream commit e6344c060209ef4e970cac18adeac1676a2a73cd ] In commit 79f033f6f229 ("iwlwifi: dbg: don't limit dump decisions to all or monitor") we changed the code to pass around a bitmap, but in the monitor_only case, one place accidentally used the bit number, not the bit mask, resulting in CSR and FW_INFO getting dumped instead of monitor data. Fix that. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: mvm: fix access to BSS elements

2021-09-18T11:42:18+00:00

[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ] BSS elements are protected using RCU, so we need to use RCU properly to access them, fix that. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: mvm: Fix umac scan request probe parameters

2021-09-18T11:42:18+00:00

[ Upstream commit 35fc5feca7b24b97e828e6e6a4243b4b9b0131f8 ] Both 'iwl_scan_probe_params_v3' and 'iwl_scan_probe_params_v4' wrongly addressed the 'bssid_array' field which should supposed to be any array of BSSIDs each of size ETH_ALEN and not the opposite. Fix it. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210802215208.04146f24794f.I90726440ddff75013e9fecbe9fa1a05c69e3f17b@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: mvm: avoid static queue number aliasing

2021-09-18T11:42:18+00:00

[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ] When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then queue numbers are just sequentially assigned 0, 1, 2, ... Prior to TVQM, in DQA, there were some statically allocated queue numbers: * IWL_MVM_DQA_AUX_QUEUE == 1, * both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and * IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9. Now, these values are assigned to the members mvm->aux_queue, mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by default. Normally, this doesn't really matter, and if TVQM is in fact available we override them to the real values after allocating a queue for use there. However, this allocation doesn't always happen. For example, for mvm->p2p_dev_queue (== 2) it only happens when the P2P Device interface is started, if any. If it's not started, the value in mvm->p2p_dev_queue remains 2. This wouldn't really matter all that much if it weren't for iwl_mvm_is_static_queue() which checks a queue number against one of those four static numbers. Now, if no P2P Device or monitor interface is added then queue 2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously returns true for it. If it then gets full, all interface queues are stopped, instead of just backpressuring against the one TXQ that's really the only affected one. This clearly can lead to issues, as everything is stopped even if just a single TXQ filled its corresponding HW queue, if it happens to have an appropriate number (2 or 9, AUX is always reassigned.) Due to a mac80211 bug, this also led to a situation in which the queues remained stopped across a deauthentication and then attempts to connect to a new AP started failing, but that's fixed separately. Fix all of this by simply initializing the queue numbers to the invalid value until they're used, if TVQM is enabled, and also setting them back to that value when the queues are later freed again. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changed

2021-09-18T11:42:18+00:00

[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ] If beacon_inject_active is true, we will return without freeing beacon. Fid that by freeing it before returning. Signed-off-by: Zhang Qilong [reworded the commit message] Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: mvm: Do not use full SSIDs in 6GHz scan

2021-09-18T11:42:18+00:00

[ Upstream commit deedf9b97cd4ef45da476c9bdd2a5f3276053956 ] The scan request processing populated the direct SSIDs in the FW scan request command also for 6GHz scan, which is not needed and might result in unexpected behavior. Fix the code to add the direct SSIDs only in case the scan is not a 6GHz scan. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20210802170640.f465937c7bbf.Ic11a1659ddda850c3ec1b1afbe9e2b9577ac1800@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin