kernel/git/stable/linux.git/drivers/nfc/s3fwrn5/uart.c, branch master

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2026-04-14T03:10:58+00:00

Pull gpio updates from Bartosz Golaszewski: "For this merge window we have two new drivers: support for GPIO-signalled ACPI events on Intel platforms and a generic GPIO-over-pinctrl driver using the ARM SCMI protocol for controlling pins. Several things have been reworked in GPIO core: we unduplicated GPIO hog handling, reduced the number of SRCU locks and dereferences, improved support for software-node-based lookup and removed more legacy code after converting remaining users to modern alternatives. There's also a number of driver reworks and refactoring, documentation updates, some bug-fixes and new tests. GPIO core: - defer probe on software node lookups when the remote software node exists but has not been registered as a firmware node yet - unify GPIO hog handling by moving code duplicated in OF and ACPI modules into GPIO core and allow setting up hogs with software nodes - allow matching GPIO controllers by secondary firmware node if matching by primary does not succeed - demote deferral warnings to debug level as they are quite normal when using software nodes which don't support fw_devlink yet - disable the legacy GPIO character device uAPI v1 supprt in Kconfig by default - rework several core functions in preparation for the upcoming Revocable helper library for protecting resources against sudden removal, this reduces the number of SRCU dereferences in GPIO core - simplify file descriptor logic in GPIO character device code by using FD_PREPARE() - introduce a header defining symbols used by both GPIO consumers and providers to avoid having to include provider-specific headers from drivers which only consume GPIOs - replace snprintf() with strscpy() where formatting is not required New drivers: - add the gpio-by-pinctrl generic driver using the ARM SCMI protocol to control GPIOs (along with SCMI changes pulled from the pinctrl tree) - add a driver providing support for handling of platform events via GPIO-signalled ACPI events (used on Intel Nova Lake and later platforms) Driver changes: - extend the gpio-kempld driver with support for more recent models, interrupts and setting/getting multiple values at once - improve interrupt handling in gpio-brcmstb - add support for multi-SoC systems in gpio-tegra186 - make sure we return correct values from the .get() callbacks in several GPIO drivers by normalizing any values other than 0, 1 or negative error numbers - use flexible arrays in several drivers to reduce the number of required memory allocations - simplify synchronous waiting for virtual drivers to probe and remove the dedicated, a bit overengineered helper library dev-sync-probe - remove unneeded Kconfig dependencies on OF_GPIO in several drivers and subsystems - convert the two remaining users of of_get_named_gpio() to using GPIO descriptors and remove the (no longer used) function along with the header that declares it - add missing includes in gpio-mmio - shrink and simplify code in gpio-max732x by using guard(mutex) - remove duplicated code handling the 'ngpios' property from gpio-ts4800, it's already handled in GPIO core - use correct variable type in gpio-aspeed - add support for a new model in gpio-realtek-otto - allow to specify the active-low setting of simulated hogs over the configfs interface (in addition to existing devicetree support) in gpio-sim Bug fixes: - clear the OF_POPULATED flag on hog nodes in GPIO chip remove path on OF systems - fix resource leaks in error path in gpiochip_add_data_with_key() - drop redundant device reference in gpio-mpsse Tests: - add selftests for use-after-free cases in GPIO character device code DT bindings: - add a DT binding document for SCMI based, gpio-over-pinctrl devices - fix interrupt description in microchip,mpfs-gpio - add new compatible for gpio-realtek-otto - describe the resets of the mpfs-gpio controller - fix maintainer's email in gpio-delay bindings - remove the binding document for cavium,thunder-8890 as the corresponding device is bound over PCI and not firmware nodes Documentation: - update the recommended way of converting legacy boards to using software nodes for GPIO description - describe GPIO line value semantics - misc updates to kerneldocs Misc: - convert OMAP1 ams-delta board to using GPIO hogs described with software nodes" * tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits) gpio: swnode: defer probe on references to unregistered software nodes dt-bindings: gpio: cavium,thunder-8890: Remove DT binding Documentation: gpio: update the preferred method for using software node lookup gpio: gpio-by-pinctrl: s/used to do/is used to do/ gpio: aspeed: fix unsigned long int declaration gpio: rockchip: convert to dynamic GPIO base allocation gpio: remove dev-sync-probe gpio: virtuser: stop using dev-sync-probe gpio: aggregator: stop using dev-sync-probe gpio: sim: stop using dev-sync-probe gpio: Add Intel Nova Lake ACPI GPIO events driver gpiolib: Make deferral warnings debug messages gpiolib: fix hogs with multiple lines gpio: fix up CONFIG_OF dependencies gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver gpio: dt-bindings: Add GPIO on top of generic pin control firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE ...

nfc: s3fwrn5: allocate rx skb before consuming bytes

2026-04-03T22:57:46+00:00

s3fwrn82_uart_read() reports the number of accepted bytes to the serdev core. The current code consumes bytes into recv_skb and may already deliver a complete frame before allocating a fresh receive buffer. If that alloc_skb() fails, the callback returns 0 even though it has already consumed bytes, and it leaves recv_skb as NULL for the next receive callback. That breaks the receive_buf() accounting contract and can also lead to a NULL dereference on the next skb_put_u8(). Allocate the receive skb lazily before consuming the next byte instead. If allocation fails, return the number of bytes already accepted. Fixes: 3f52c2cb7e3a ("nfc: s3fwrn5: Support a UART interface") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260402042148.65236-1-pengpeng@iscas.ac.cn Signed-off-by: Jakub Kicinski

nfc: s3fwrn5: convert to gpio descriptors

2026-03-09T09:25:34+00:00

Replace the legacy of_get_named_gpio() / gpio_request_one() / gpio_set_value() API with the descriptor-based devm_gpiod_get() / gpiod_set_value() API from , removing the dependency on . This removes the s3fwrn5_i2c_parse_dt() and s3fwrn82_uart_parse_dt() functions since devm_gpiod_get() handles both DT lookup and resource management. The gpio_en and gpio_fw_wake fields in struct phy_common are changed from int to struct gpio_desc *. Add rename quirks in gpiolib-of.c for the deprecated "s3fwrn5,en-gpios" and "s3fwrn5,fw-gpios" properties to maintain backward compatibility with old device trees. Signed-off-by: Jialu Xu Reviewed-by: Linus Walleij Link: https://patch.msgid.link/94FF47746A92BD6B+20260307030623.3495092-2-xujialu@vimux.org Signed-off-by: Bartosz Golaszewski

treewide, serdev: change receive_buf() return type to size_t

2024-01-28T02:13:53+00:00

receive_buf() is called from ttyport_receive_buf() that expects values ">= 0" from serdev_controller_receive_buf(), change its return type from ssize_t to size_t. The need for this clean-up was noticed while fixing a warning, see commit 94d053942544 ("Bluetooth: btnxpuart: fix recv_buf() return value"). Changing the callback prototype to return an unsigned seems the best way to document the API and ensure that is properly used. GNSS drivers implementation of serdev receive_buf() callback return directly the return value of gnss_insert_raw(). gnss_insert_raw() returns a signed int, however this is not an issue since the value returned is always positive, because of the kfifo_in() implementation. gnss_insert_raw() could be changed to return also an unsigned, however this is not implemented here as request by the GNSS maintainer Johan Hovold. Suggested-by: Jiri Slaby Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Signed-off-by: Francesco Dolcini Acked-by: Jonathan Cameron #for-iio Reviewed-by: Johan Hovold Reviewed-by: Rob Herring Reviewed-by: Alex Elder Acked-by: Maximilian Luz # for platform/surface Acked-by: Lee Jones Acked-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240122180551.34429-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman

tty: serdev: convert to u8 and size_t

2023-12-08T11:02:38+00:00

Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. This patch converts struct serdev_device_ops hooks and its instantiations. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Rob Herring Acked-by: Johan Hovold Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

nfc: s3fwrn5: Support a UART interface

2020-12-03T01:55:25+00:00

Since S3FWRN82 NFC Chip, The UART interface can be used. S3FWRN82 uses NCI protocol and supports I2C and UART interface. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bongsu Jeon Signed-off-by: Jakub Kicinski