kernel/git/stable/linux.git/drivers/nvme/target, branch linux-6.4.y

nvme: fix miss command type check

2023-05-30T15:50:24+00:00

In the function nvme_passthru_end(), only the value of the command opcode is checked, without checking the command type (IO command or Admin command). When we send a Dataset Management command (The opcode of the Dataset Management command is the same as the Set Feature command), kernel thinks it is a set feature command, then sets the controller's keep alive interval, and calls nvme_keep_alive_work(). Signed-off-by: min15.li Reviewed-by: Kanchan Joshi Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57+00:00

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux

2023-04-26T19:52:58+00:00

Pull block updates from Jens Axboe: - drbd patches, bringing us closer to unifying the out-of-tree version and the in tree one (Andreas, Christoph) - support for auto-quiesce for the s390 dasd driver (Stefan) - MD pull request via Song: - md/bitmap: Optimal last page size (Jon Derrick) - Various raid10 fixes (Yu Kuai, Li Nan) - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk) - NVMe pull request via Christoph: - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - Validate nvmet module parameters (Chaitanya Kulkarni) - Fence TCP socket on receive error (Chris Leech) - Fix async event trace event (Keith Busch) - Minor cleanups (Chaitanya Kulkarni, zhenwei pi) - Fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - Fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - Fix irq locking in nvme-fcloop (Ming Lei) - Remove queue mapping helper for rdma devices (Sagi Grimberg) - use structured request attribute checks for nbd (Jakub) - fix blk-crypto race conditions between keyslot management (Eric) - add sed-opal support for reading read locking range attributes (Ondrej) - make fault injection configurable for null_blk (Akinobu) - clean up the request insertion API (Christoph) - clean up the queue running API (Christoph) - blkg config helper cleanups (Tejun) - lazy init support for blk-iolatency (Tejun) - various fixes and tweaks to ublk (Ming) - remove hybrid polling. It hasn't really been useful since we got async polled IO support, and these days we don't support sync polled IO at all (Keith) - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming, Chaitanya, me) * tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits) nbd: fix incomplete validation of ioctl arg ublk: don't return 0 in case of any failure sed-opal: geometry feature reporting command null_blk: Always check queue mode setting from configfs block: ublk: switch to ioctl command encoding blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush block, bfq: Fix division by zero error on zero wsum fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m block: store bdev->bd_disk->fops->submit_bio state in bdev block: re-arrange the struct block_device fields for better layout md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer ...

nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"

2023-04-13T07:02:55+00:00

fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled. So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply which enables irq unconditionally. Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore() Fixes: c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings") Reported-by: Yi Zhang Signed-off-by: Ming Lei Reviewed-by: Ewan D. Milne Tested-by: Yi Zhang Signed-off-by: Christoph Hellwig

nvmet-tcp: validate idle poll modparam value

2023-04-13T06:55:05+00:00

The module parameter idle_poll_period_usecs is passed to the function usecs_to_jiffies() which has following prototype and expect idle_poll_period_usecs arg type to be unsigned int:- unsigned long usecs_to_jiffies(const unsigned int u); Use similar module parameter validation callback as previous patch. Signed-off-by: Chaitanya Kulkarni Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig

nvmet-tcp: validate so_priority modparam value

2023-04-13T06:55:05+00:00

The module parameter so_priority is passed to the function sock_set_priority() which has following prototype and expect priotity arg type to be u32:- void sock_set_priority(struct sock *sk, u32 priority); Add a module parameter validation callback to reject any negative values for the so_priority as it is defigned as int. Use this oppurtunity to update the module parameter description and print the default value. Signed-off-by: Chaitanya Kulkarni Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig

nvmet: remove nvmet_req_cns_error_complete

2023-04-13T06:55:05+00:00

Just fold it into the only caller. Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg

nvmet: rename nvmet_execute_identify_cns_cs_ns

2023-04-13T06:55:04+00:00

nvmet_execute_identify_ns_zns is a more descriptive name for the function handling the "I/O Command Set Specific Identify Namespace Data Structure for the Zoned Namespace Command Set". Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Damien Le Moal

nvmet: fix Identify Identification Descriptor List handling

2023-04-13T06:55:04+00:00

The Identification Descriptor List CNS value does not check the CSI value, so remove the code trying to handle it. Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Damien Le Moal

nvmet: cleanup nvmet_execute_identify()

2023-04-13T06:55:04+00:00

Change the order of the cases in nvmet_execute_identify() main switch-case to match the NVMe 2.0 specification order as defined in table 273. This is also the increasing order of CNS values. While at it, for clarity, make it explicit that identify with cns set to NVME_ID_CNS_CS_NS does not support NVM command set specific data. No functional changes are introduced by this cleanup. Signed-off-by: Damien Le Moal Reviewed-by: Chaitanya Kulkarni Tested-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig