kernel/git/stable/linux.git/drivers/pci/access.c, branch linux-3.8.y

PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS

2013-02-28T13:38:35+00:00

commit 969daa349f4821a02936af7202b51a9affc7b6da upstream. PCI_EXP_FLAGS_TYPE is a mask, not an offset. Fix it. Previously, pcie_capability_read_word(..., PCI_EXP_FLAGS, ...) would fail. [bhelgaas: tweak changelog] Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

PCI: Add accessors for PCI Express Capability

2012-08-23T15:41:20+00:00

The PCI Express Capability (PCIe spec r3.0, sec 7.8) comes in two versions, v1 and v2. In v1 Capability structures (PCIe spec r1.0 and r1.1), some fields are optional, so the structure size depends on the device type. This patch adds functions to access this capability so drivers don't have to be aware of the differences between v1 and v2. Note that these new functions apply only to the "PCI Express Capability," not to any of the other "PCI Express Extended Capabilities" (AER, VC, ACS, MFVC, etc.) Function pcie_capability_read_word/dword() reads the PCIe Capabilities register and returns the value in the reference parameter "val". If the PCIe Capabilities register is not implemented on the PCIe device, "val" is set to 0. Function pcie_capability_write_word/dword() writes the value to the specified PCIe Capability register. Function pcie_capability_clear_and_set_word/dword() sets and/or clears bits of a PCIe Capability register. [bhelgaas: changelog, drop "pci_" prefixes, don't export pcie_capability_reg_implemented()] Signed-off-by: Jiang Liu Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas

PCI: export pci_user functions for use by other drivers

2012-06-12T15:21:42+00:00

VFIO PCI support will make use of these for user-initiated PCI config accesses. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas

PCI: Introduce INTx check & mask API

2012-01-06T20:10:34+00:00

These new PCI services allow to probe for 2.3-compliant INTx masking support and then use the feature from PCI interrupt handlers. The services are properly synchronized with concurrent config space access via sysfs or on device reset. This enables generic PCI device drivers like uio_pci_generic or KVM's device assignment to implement the necessary kernel-side IRQ handling without any knowledge about device-specific interrupt status and control registers. Acked-by: Michael S. Tsirkin Signed-off-by: Jan Kiszka Signed-off-by: Jesse Barnes

PCI: Rework config space blocking services

2012-01-06T20:10:33+00:00

pci_block_user_cfg_access was designed for the use case that a single context, the IPR driver, temporarily delays user space accesses to the config space via sysfs. This assumption became invalid by the time pci_dev_reset was added as locking instance. Today, if you run two loops in parallel that reset the same device via sysfs, you end up with a kernel BUG as pci_block_user_cfg_access detect the broken assumption. This reworks the pci_block_user_cfg_access to a sleeping service pci_cfg_access_lock and an atomic-compatible variant called pci_cfg_access_trylock. The former not only blocks user space access as before but also waits if access was already locked. The latter service just returns false in this case, allowing the caller to resolve the conflict instead of raising a BUG. Adaptions of the ipr driver were originally written by Brian King. Acked-by: Brian King Acked-by: Michael S. Tsirkin Signed-off-by: Jan Kiszka Signed-off-by: Jesse Barnes

PCI: handle positive error codes

2011-05-10T22:43:36+00:00

Callers expect pci_user_{read,write}_config_*() to indicate errors by returning negative values. Prior to this change, the indicated routines could return positive error codes (e.g. PCIBIOS_BAD_REGISTER_NUMBER) which callers would mistakenly interpret as success. This change converts any non-zero return from the mentioned routines into unambiguous negative value return codes. Signed-off-by: Greg Thelen Signed-off-by: Jesse Barnes

PCI: check pci_vpd_pci22_wait() return

2011-05-10T22:43:35+00:00

pci_vpd_pci22_write() calls pci_vpd_pci22_wait() after writing PCI_VPD_DATA and PCI_VPD_ADDR to wait for the VPD operation to complete. The result pci_vpd_pci22_wait() was not checked for error. This change checks for error. Signed-off-by: Greg Thelen Signed-off-by: Jesse Barnes

PCI: output FW warning in pci_read/write_vpd

2010-05-18T22:00:25+00:00

pci_read/write_vpd() can fail due to a timeout. Usually the command times out because of firmware issues (incorrect vpd length, etc.) on the PCI card. Currently, the timeout occurs silently. Output a message to the user indicating that they should check with their vendor for new firmware. Reviewed-by: Randy Dunlap Signed-off-by: Prarit Bhargava Signed-off-by: Jesse Barnes

PCI: Convert pci_lock to raw_spinlock

2010-05-11T19:01:09+00:00

pci_lock must be a real spinlock in preempt-rt. Convert it to raw_spinlock. No change for !RT kernels. Signed-off-by: Thomas Gleixner Signed-off-by: Jesse Barnes

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn