kernel/git/stable/linux.git/drivers/pci/controller, branch linux-6.2.y

PCI: imx6: Install the fault handler only on compatible match

2023-05-11T14:11:21+00:00

[ Upstream commit 5f5ac460dfe7f4e11f99de9870f240e39189cf72 ] commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") added a fault hook to this driver in the probe function. So it was only installed if needed. commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") moved it from probe to driver init which installs the hook unconditionally as soon as the driver is compiled into a kernel. When this driver is compiled as a module, the hook is not registered until after the driver has been matched with a .compatible and loaded. commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling") extended the fault handling code. commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") added some protection for non-ARM architectures, but this does not protect non-i.MX ARM architectures. Since fault handlers can be triggered on any architecture for different reasons, there is no guarantee that they will be triggered only for the assumed situation, leading to improper error handling (i.MX6-specific imx6q_pcie_abort_handler) on foreign systems. I had seen strange L3 imprecise external abort messages several times on OMAP4 and OMAP5 devices and couldn't make sense of them until I realized they were related to this unused imx6q driver because I had CONFIG_PCI_IMX6=y. Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed to run on different ARM SoC and be differentiated only by device tree binaries. So turning off CONFIG_PCI_IMX6 is not a solution. Therefore we check the compatible in the init function before registering the fault handler. Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling") Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") Signed-off-by: H. Nikolaus Schaller Signed-off-by: Lorenzo Pieralisi Reviewed-by: Richard Zhu Signed-off-by: Sasha Levin

PCI: qcom: Fix the incorrect register usage in v2.7.0 config

2023-05-11T14:10:49+00:00

commit 2542e16c392508800f1d9037feee881a9c444951 upstream. Qcom PCIe IP version v2.7.0 and its derivatives don't contain the PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect register usage which is modifying a different register. Also in this IP version, this register change doesn't depend on MSI being enabled. So remove that check also. Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Lorenzo Pieralisi Cc: # 5.6+ Signed-off-by: Greg Kroah-Hartman

PCI: kirin: Select REGMAP_MMIO

2023-05-11T14:10:48+00:00

commit 3a2776e8a0e156a61f5b59ae341d8fffc730b962 upstream. pcie-kirin uses regmaps, and needs to pull them in; otherwise, with CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces a linker failure looking for __devm_regmap_init_mmio_clk(). Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers") Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org Signed-off-by: Josh Triplett [lpieralisi@kernel.org: commit log and removed REGMAP select] Signed-off-by: Lorenzo Pieralisi Cc: stable@vger.kernel.org # 5.16+ Signed-off-by: Greg Kroah-Hartman

PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled

2023-04-06T10:12:32+00:00

[ Upstream commit cdce67099117ece371582f706c6eff7d3a65326d ] If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val' is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization. Commit ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists") did not account for further usage of 'val', so we wrote improper values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled. Move the PCIE_PORT_LINK_CONTROL update to be completely after the PCIE_PL_CHK_REG_CONTROL_STATUS register initialization. [bhelgaas: commit log adapted from Serge's version] Fixes: ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists") Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Bjorn Helgaas Reviewed-by: Serge Semin Signed-off-by: Sasha Levin

PCI: loongson: Add more devices that need MRRS quirk

2023-03-11T12:50:45+00:00

[ Upstream commit c768f8c5f40fcdc6f058cc2f02592163d6c6716c ] Loongson-2K SOC and LS7A2000 chipset add new PCI IDs that need MRRS quirk. Add them. Link: https://lore.kernel.org/r/20230211023321.3530080-1-chenhuacai@loongson.cn Signed-off-by: Huacai Chen Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: loongson: Prevent LS7A MRRS increases

2023-03-11T12:50:41+00:00

[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ] Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions. Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value. The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device. N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision. [1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn [bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: qcom: Fix host-init error handling

2023-03-10T08:28:56+00:00

[ Upstream commit 997e010de9134474dbfde52be03efd7d1bce902d ] Implement the new host_deinit() callback so that the PHY is powered off and regulators and clocks are disabled also on late host-init errors. Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Signed-off-by: Sasha Levin

PCI: mt7621: Delay phy ports initialization

2023-03-10T08:28:54+00:00

[ Upstream commit 0cb2a8f3456ff1cc51d571e287a48e8fddc98ec2 ] Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need to delay phy port initialization after calling the mt7621_pcie_init_port() driver function to get into reliable boots for both warm and hard resets. The delay required to detect the ports seems to be in the range [75-100] milliseconds. If the ports are not detected the controller is not functional. There is no datasheet or something similar to really understand why this extra delay is needed only for these devices and it is not for most of the boards that are built on mt7621 SoC. This issue has been reported by openWRT community and the complete discussion is in [0]. The 100 milliseconds delay has been tested in all devices to validate it. Add the extra 100 milliseconds delay to fix the issue. [0]: https://github.com/openwrt/openwrt/pull/11220 Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver") Signed-off-by: Sergio Paracuellos Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin

PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN

2023-01-04T12:06:52+00:00

a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed PCI_MSI_IRQ_DOMAIN and changed all references to refer to PCI_MSI instead. ba6ed462dcf4 ("PCI: dwc: Add Baikal-T1 PCIe controller support") independently added PCIE_BT1, depending on PCI_MSI_IRQ_DOMAIN. Both commits appeared in v6.2-rc1, so the latter missed the conversion from PCI_MSI_IRQ_DOMAIN to PCI_MSI. Update PCIE_BT1 to depend on PCI_MSI instead. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20221215103452.23131-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Serge Semin

Merge tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2022-12-19T14:40:58+00:00

Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ...