kernel/git/stable/linux.git/drivers/rapidio/devices, branch linux-4.10.y

mm: replace get_user_pages() write/force parameters with gup_flags

2016-10-19T15:11:43+00:00

This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Christian König Acked-by: Jesper Nilsson Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds

rapidio/tsi721: fix incorrect detection of address translation condition

2016-09-02T00:52:02+00:00

Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Cc: [4.6+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: modify for rev.3 specification changes

2016-08-02T23:35:37+00:00

Implement changes made in RapidIO specification rev.3 to LP-Serial Physical Layer register definitions: - use per-port register offset calculations based on LP-Serial Extended Features Block (EFB) Register Map type (I or II) with different per-port offset step (0x20 vs 0x40 respectfully). - remove deprecated Parallel Physical layer definitions and related code. [alexandre.bounine@idt.com: fix DocBook warning for gen3 update] Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Tested-by: Barry Wood Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: change inbound window size type to u64

2016-08-02T23:35:37+00:00

Current definition of map_inb() mport operations callback uses u32 type to specify required inbound window (IBW) size. This is limiting factor because existing hardware - tsi721 and fsl_rio, both support IBW size up to 16GB. Changing type of size parameter to u64 to allow IBW size configurations larger than 4GB. [alexandre.bounine@idt.com: remove compiler warning about size of constant] Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio/tsi721_dma: advance queue processing from transfer submit call

2016-08-02T23:35:35+00:00

Add advancing transfer queue immediately from transfer submit call. DMA performance improvement: This will start transfer without waiting for 'issue_pending' command if there is no DMA transfer in progress. Link: http://lkml.kernel.org/r/1469125134-16523-8-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio/tsi721: add messaging mbox selector parameter

2016-08-02T23:35:34+00:00

Add module parameter to allow load time configuration of available RapidIO messaging mailboxes (MBOX1 - MBOX4). Having a messaging MBOX selector mask allows to define which MBOXes are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Tested-by: Barry Wood Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio/tsi721: add PCIe MRRS override parameter

2016-08-02T23:35:34+00:00

Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow users to override configuration register value set during PCIe bus initialization. Performance of Tsi721 device as PCIe bus master can be improved if MRRS is set to its maximum value (4096 bytes). Some platforms have limitations for supported MRRS and therefore the default value should be preserved, unless it is known that given platform supports full set of MRRS values defined by PCI Express specification. Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio/tsi721_dma: add channel mask and queue size parameters

2016-08-02T23:35:33+00:00

Add module parameters to allow load time configuration of DMA channels. Depending on application, performance of DMA data transfers can benefit from adjusted sizes of buffer descriptor ring and/or transaction requests queue. Having HW DMA channel selector mask allows to define which channels (from seven available) are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Tested-by: Barry Wood Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: remove unnecessary 0x prefixes before %pa extension uses

2016-08-02T23:35:32+00:00

Patch series "RapidIO subsystem updates". This set of patches contains RapidIO subsystem fixes and updates that have been made since kernel v4.6. The most significant update brings changes related to the latest revision of RapidIO specification (rev.3.x) and introduction of next generation of RapidIO switches by IDT (RXS1632 and RXS2448). This patch (of 13): This is RapidIO part of the original patch submitted by Joe Perches. (see: https://lkml.org/lkml/2016/3/5/19) Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code to special_hex_number()") %pa uses have been output with a 0x prefix. These 0x prefixes in the formats are unnecessary. Link: http://lkml.kernel.org/r/1469125134-16523-2-git-send-email-alexandre.bounine@idt.com Signed-off-by: Joe Perches Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio/mport_cdev: fix uapi type definitions

2016-05-06T00:38:53+00:00

Fix problems in uapi definitions reported by Gabriel Laskar: (see https://lkml.org/lkml/2016/4/5/205 for details) - move public header file rio_mport_cdev.h to include/uapi/linux directory - change types in data structures passed as IOCTL parameters - improve parameter checking in some IOCTL service routines Signed-off-by: Alexandre Bounine Reported-by: Gabriel Laskar Tested-by: Barry Wood Cc: Gabriel Laskar Cc: Matt Porter Cc: Aurelien Jacquiot Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds