kernel/git/stable/linux.git/drivers/rapidio/switches, branch linux-3.0.y

rapidio: fix default routing initialization

2011-05-18T09:55:22+00:00

Fix switch initialization to ensure that all switches have default routing disabled. This guarantees that no unexpected RapidIO packets arrive to the default port set by reset and there is no default routing destination until it is properly configured by software. This update also unifies handling of unmapped destinations by tsi57x, IDT Gen1 and IDT Gen2 switches. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: [2.6.37+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

RapidIO: add IDT CPS-1432 switch definitions

2011-04-14T23:06:56+00:00

Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: change to new flag variable

2011-03-17T13:05:35+00:00

switches/ depends on RAPIDIO_DEBUG so the subdir-ccflags-y variant seems to be appropriate here. Signed-off-by: matt mooney Acked-by: WANG Cong Signed-off-by: Michal Marek

rapidio: add new idt sRIO switches

2011-01-13T16:03:18+00:00

Add new sRIO switch device IDs and enable a basic support for them. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: use common destid storage for endpoints and switches

2011-01-13T16:03:17+00:00

Change code to use one storage location common for switches and endpoints. This eliminates unnecessary device type checks during basic access operations. Logic that assigns destid to RIO devices stays unchanged - as before, switches use an associated destid because they do not have their own. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: fix destructive port EM initialization for Tsi568

2010-10-28T01:03:16+00:00

Replace possibly damaging broadcast writes into the per-port SP_MODE registers with individual writes for each port. This will preserve individual port configurations in case if ports are configured differently. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: fix maximum port number in tsi57x EM initialization

2010-10-28T01:03:16+00:00

Replace hardcoded maximum port number with actual reported number of switch ports. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: add support for IDT CPS Gen2 switches

2010-10-28T01:03:16+00:00

Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616 Gen2 devices. Signed-off-by: Alexandre Bounine Cc: Thomas Moll Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: add default handler for error-stopped state

2010-10-28T01:03:15+00:00

The default error-stopped state handler provides recovery mechanism as defined by RIO specification. Signed-off-by: Alexandre Bounine Cc: Thomas Moll Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: use default route value for CPS switches

2010-05-27T16:12:51+00:00

Fix to use correct default value for routing table entries. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Thomas Moll Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds