kernel/git/stable/linux.git/drivers/reset/Makefile, branch master

Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

2026-08-17T16:28:08+00:00

Pull clk patches from Brian Masney: - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS), UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree bindings. Si549 support was added to the existing si544 driver. - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha EN7523 PCIe PERSTOUT reset lines. - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to the existing optional variant, and exports devm_clk_hw_register_composite_pdata() for modular drivers. - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1 support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL charge pump/lock parameter programming during dynamic reconfiguration. - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on registration failure, a prepare reference leak in the palmas driver, unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a clocking-wizard clock difference detection bug. - Various cleanups across tegra, st, and mvebu providers to stop misusing the consumer clock API, along with other minor fixes and improvements. Signed-off-by: Brian Masney * tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits) clk: tegra: set up proper EMC clock implementation for Tegra114 clk: clocking-wizard: remove 20kHz restriction clk: clocking-wizard: optimize clock search clk: clocking-wizard: fix clock difference detection clk: mediatek: mt8135: Fix inverted gate control for devapc_ck clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig clk: tegra: support 48MHz clock for pll_p_out1 clk: aspeed: add AST2700 PECI clock dt-bindings: clock: ast2700: add PECI clock clk: mediatek: Add mt8173-mfgtop driver dt-bindings: clock: mediatek: Add mt8173 mfgtop clk: tegra: clean-up simple provider misuse of the consumer API clk: st: clean-up simple provider misuse of the consumer API clk: mvebu: clean-up simple provider misuse of the consumer API clk: remove conditional return with no effect clk: Add devm_clk_bulk_get_enable() clk: en7523: add support for dedicated PCIe PERSTOUT reset dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT arm64: dts: cix: sky1: add audss cru reset: cix: add sky1 audss auxiliary reset driver ...

reset: cix: add sky1 audss auxiliary reset driver

2026-07-28T15:25:30+00:00

Add an auxiliary reset controller driver for the AUDSS CRU. Sixteen software reset lines for audio subsystem peripherals are controlled through one register in the CRU register map. The driver is created by the AUDSS clock platform driver and registers the reset controller on the CRU device node. Signed-off-by: Joakim Zhang Reviewed-by: Philipp Zabel Acked-by: Philipp Zabel Signed-off-by: Brian Masney

reset: eswin: Add eic7700 HSP reset driver

2026-06-29T17:18:20+00:00

Add auxiliary driver to support ESWIN EIC7700 high-speed peripherals system. The reset controller is created using the auxiliary device framework and set up in the clock driver. Reviewed-by: Philipp Zabel Signed-off-by: Xuyang Dong Signed-off-by: Brian Masney

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2026-04-21T15:33:26+00:00

Pull clk updates from Stephen Boyd: "We've finally gotten rid of the struct clk_ops::round_rate() code after months of effort from Brian Masney. Now the only option is to use determine_rate(), which is good because that takes a struct argument instead of just a couple unsigned longs, allowing us to easily modify the way we determine and set rates in the clk tree. Beyond that core framework change we've got the typical pile of new SoC clk driver additions, fixes for clk data and/or adding missing clks because the consumer driver using those clks wasn't ready, etc. The usual suspects are all here: Qualcomm, Samsung, Mediatek, and Rockchip along with some newcomers making RISC-V SoCs like ESWIN's eic700 and Tenstorrent's Atlantis. The clk driver side of this looks pretty normal. Core: - Remove the round_rate() clk op (yay!) New Drivers: - ESWIN eic700 SoC clk support - Econet EN751221 SoC clock/reset support - Global TCSR, RPMh, and display clock controller support for the Qualcomm Eliza platform - TCSR, the multiple global, and the RPMh clock controller support for the Qualcomm Nord platform - GPU clock controller support for Qualcomm SM8750 - Video and GPU clock controller support for Qualcomm Glymur - Global clock controller support for Qualcomm IPQ5210 - Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock controllers on the SoC - ExynosAutov920: Add G3D (GPU) clock controller - Clock driver for the Rockchip RV1103B SoC - Initial support for the Renesas RZ/G3L (R9A08G046) SoC - Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits) clk: visconti: pll: initialize clk_init_data to zero clk: fsl-sai: Add MCLK generation support clk: fsl-sai: Extract clock setup into fsl_sai_clk_register() dt-bindings: clock: fsl-sai: Document clock-cells = <1> support clk: fsl-sai: Add i.MX8M support with 8 byte register offset clk: fsl-sai: Sort the headers dt-bindings: clock: fsl-sai: Document i.MX8M support clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC clk: qcom: rpmh: Add support for Nord rpmh clocks clk: qcom: Add TCSR clock driver for Nord SoC dt-bindings: clock: qcom: Add Nord Global Clock Controller dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON clk: qcom: Constify list of critical CBCR registers clk: qcom: Constify qcom_cc_driver_data clk: qcom: videocc-glymur: Constify qcom_cc_desc clk: qcom: Add a driver for SM8750 GPU clocks dt-bindings: clock: qcom: Add SM8750 GPU clocks clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support ...

reset: tenstorrent: Add reset controller for Atlantis

2026-03-10T03:10:26+00:00

Adds Atlantis Reset Controller driver, which shares the same regmap as prcm ( clock controller). This version of the reset controller driver covers resets from the RCPU prcm. Reviewed-by: Philipp Zabel Acked-by: Philipp Zabel Signed-off-by: Anirudh Srinivasan Reviewed-by: Drew Fustini Signed-off-by: Drew Fustini

reset: add Sky1 soc reset support

2026-03-09T11:07:11+00:00

Add support for the resets on Cix's Sky1 SoC. There are two reset controllers on Cix Sky1 Soc. One is located in S0 domain, and the other is located in S5 domain. Signed-off-by: Gary Yang Reviewed-by: Philipp Zabel Signed-off-by: Philipp Zabel

reset: Create subdirectory for SpacemiT drivers

2026-01-24T15:53:02+00:00

Create a dedicated subdirectory for SpacemiT reset drivers to allow for better organization as support for more SoCs is added. Move the existing K1 reset driver into this new directory and rename it to reset-spacemit-k1.c. Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the clock driver to register reset devices as an auxiliary device, so the default should reflect this dependency. Also sort the drivers/reset/Kconfig entries alphabetically. Reviewed-by: Alex Elder Signed-off-by: Guodong Xu Reviewed-by: Yixun Lan Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1] Signed-off-by: Philipp Zabel

reset: eswin: Add eic7700 reset driver

2025-11-18T16:52:54+00:00

Add support for reset controller in eic7700 series chips. Provide functionality for asserting and deasserting resets on the chip. Signed-off-by: Yifeng Huang Signed-off-by: Xuyang Dong Reviewed-by: Philipp Zabel Signed-off-by: Philipp Zabel

reset: aspeed: register AST2700 reset auxiliary bus device

2025-08-14T10:17:45+00:00

The AST2700 reset driver is registered as an auxiliary device due to reset and clock controller share the same register region. Signed-off-by: Ryan Chen Reviewed-by: Philipp Zabel Link: https://lore.kernel.org/r/20250708052909.4145983-3-ryan_chen@aspeedtech.com Signed-off-by: Philipp Zabel

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-07-31T20:36:27+00:00

Pull clk updates from Stephen Boyd: "This is the usual collection of primarily clk driver updates. The big part of the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: spacemit: ccu_pll: fix error return value in recalc_rate callback clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls ...