kernel/git/stable/linux.git/drivers/rtc/rtc-vr41xx.c, branch master

rtc: vr41xx: remove driver

2022-07-26T14:34:12+00:00

Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20220715135330.134684-1-tsbogend@alpha.franken.de

rtc: rework rtc_register_device() resource management

2020-11-19T11:50:12+00:00

rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl

compat_ioctl: move rtc handling into drivers/rtc/dev.c

2019-10-23T15:23:43+00:00

We no longer need the rtc compat handling to be in common code, now that all drivers are either moved to the rtc-class framework, or (rarely) exist in drivers/char for architectures without compat mode (m68k, alpha and ia64, respectively). I checked the list of ioctl commands in drivers, and the ones that are not already handled are all compatible, again with the one exception of m68k driver, which implements RTC_PLL_GET and RTC_PLL_SET, but has no compat mode. Unlike earlier versions of this patch, I'm now adding a separate compat_ioctl handler that takes care of RTC_IRQP_READ32/RTC_IRQP_SET32 and treats all other commands as compatible, leaving the native behavior unchanged. The old conversion handler also deals with RTC_EPOCH_READ and RTC_EPOCH_SET, which are not handled in rtc-dev.c but only in a single device driver (rtc-vr41xx), so I'm adding the compat version in the same place. I don't expect other drivers to need those commands in the future. Acked-by: Alexandre Belloni Reviewed-by: Ben Hutchings Signed-off-by: Arnd Bergmann --- v4: handle RTC_EPOCH_SET32 in rtc_dev_compat_ioctl v3: handle RTC_IRQP_READ32/RTC_IRQP_SET32 in rtc_dev_compat_ioctl v2: merge compat handler into ioctl function to avoid the compat_alloc_user_space() roundtrip, based on feedback from Al Viro.

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

rtc: vr41xx: switch to rtc_time64_to_tm/rtc_tm_to_time64

2018-10-03T09:07:22+00:00

Call the 64bit versions of rtc_time_to_tm now that the range is enforced by the core. Also remove the open coded rtc_tm_to_time64. Signed-off-by: Alexandre Belloni

rtc: vr41xx: add range

2018-05-17T20:54:21+00:00

The vr41xx RTC is a 48-bit counter counting at 32.768 kHz, giving a maximum value of 2^(48-15)-1 seconds. Signed-off-by: Alexandre Belloni

rtc: vr41xx: fix possible race condition

2018-05-17T20:54:19+00:00

The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Signed-off-by: Alexandre Belloni

rtc: vr41xx: remove mktime usage

2018-05-03T20:46:25+00:00

This driver uses mktime() and rtc_time_to_tm() to convert between time values. This works fine on 64-bit kernels over the whole supported range, and the vr41xx chip is a 64-bit MIPS implementation, but it is inconsistent because it doesn't do the same thing on 32-bit kernels that overflow in 2106 or 2038. Changing it to use mktime64/rtc_time64_to_tm() should have no visible impact on vr41xx but gets us closer to removing the 32-bit interfaces. Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni

rtc: vr41xx: make alarms useful

2017-08-24T09:03:36+00:00

Currently, the IRQs are disabled when the rtc character device is closed. This means that the device needs to stay open to get alarms while the usual use case will open the device, set the alarm and close the device. Keep the alarms functional on character device release. Note that the PIE are never enabled and would anyway be disabled by the core. Signed-off-by: Alexandre Belloni

rtc: vr41xx: Wire up alarm_irq_enable

2016-03-14T16:08:25+00:00

drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni