kernel/git/stable/linux.git/drivers/s390/char, branch linux-3.4.y

s390/3215: fix tty output containing tabs

2015-04-14T09:34:03+00:00

commit e512d56c799517f33b301d81e9a5e0ebf30c2d1e upstream. git commit 37f81fa1f63ad38e16125526bb2769ae0ea8d332 "n_tty: do O_ONLCR translation as a single write" surfaced a bug in the 3215 device driver. In combination this broke tab expansion for tty ouput. The cause is an asymmetry in the behaviour of tty3215_ops->write vs tty3215_ops->put_char. The put_char function scans for '\t' but the write function does not. As the driver has logic for the '\t' expansion remove XTABS from c_oflag of the initial termios as well. Reported-by: Stephen Powell Signed-off-by: Martin Schwidefsky Cc: Ben Hutchings Signed-off-by: Zefan Li

s390/memory hotplug: prevent offline of active memory increments

2013-05-08T02:51:53+00:00

commit 94c163663fc1dcfc067a5fb3cc1446b9469975ce upstream. In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens Reviewed-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

[S390] s390/char/vmur.c: fix memory leak

2012-04-11T12:28:24+00:00

This patch is used to fix a memory leak issue in s390/char/vmur.c. A character device instance is allocated by cdev_alloc, the cdev_del will not free that space if cdev_init is applied before. Signed-off-by: Dennis Chen Signed-off-by: Martin Schwidefsky

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

2012-03-28T22:58:21+00:00

Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...

Disintegrate asm/system.h for S390

2012-03-28T17:30:02+00:00

Disintegrate asm/system.h for S390. Signed-off-by: David Howells cc: linux-s390@vger.kernel.org

s390/char: use for_each_clear_bit()

2012-03-23T23:58:34+00:00

Use for_each_clear_bit() to iterate over all the cleared bit in a memory region. Signed-off-by: Akinobu Mita Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2012-03-23T01:15:32+00:00

Pull s390 patches from Martin Schwidefsky: "The biggest patch is the rework of the smp code, something I wanted to do for some time. There are some patches for our various dump methods and one new thing: z/VM LGR detection. LGR stands for linux-guest- relocation and is the guest migration feature of z/VM. For debugging purposes we keep a log of the systems where a specific guest has lived." Fix up trivial conflict in arch/s390/kernel/smp.c due to the scheduler cleanup having removed some code next to removed s390 code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] kernel: Pass correct stack for smp_call_ipl_cpu() [S390] Ensure that vmcore_info pointer is never accessed directly [S390] dasd: prevent validate server for offline devices [S390] Remove monolithic build option for zcrypt driver. [S390] stack dump: fix indentation in output [S390] kernel: Add OS info memory interface [S390] Use block_sigmask() [S390] kernel: Add z/VM LGR detection [S390] irq: external interrupt code passing [S390] irq: set __ARCH_IRQ_EXIT_IRQS_DISABLED [S390] zfcpdump: Implement async sdias event processing [S390] Use copy_to_absolute_zero() instead of "stura/sturg" [S390] rework idle code [S390] rework smp code [S390] rename lowcore field [S390] Fix gcc 4.6.0 compile warning

Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2012-03-20T18:24:39+00:00

Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...

[S390] irq: external interrupt code passing

2012-03-11T15:59:29+00:00

The external interrupt handlers have a parameter called ext_int_code. Besides the name this paramter does not only contain the ext_int_code but in addition also the "cpu address" (POP) which caused the external interrupt. To make the code a bit more obvious pass a struct instead so the called function can easily distinguish between external interrupt code and cpu address. The cpu address field however is named "subcode" since some external interrupt sources do not pass a cpu address but a different parameter (or none at all). Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] zfcpdump: Implement async sdias event processing

2012-03-11T15:59:28+00:00

There are two different ways to do the "store data in absolute storage" SCLP event processing, synchronous and asynchrounous. This patch adds the asynchronous variant. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky