kernel/git/stable/linux.git/drivers/s390/cio, branch linux-3.18.y

s390/qdio: reset old sbal_state flags

2018-09-05T07:16:23+00:00

commit 64e03ff72623b8c2ea89ca3cb660094e019ed4ae upstream. When allocating a new AOB fails, handle_outbound() is still capable of transmitting the selected buffer (just without async completion). But if a previous transfer on this queue slot used async completion, its sbal_state flags field is still set to QDIO_OUTBUF_STATE_FLAG_PENDING. So when the upper layer driver sees this stale flag, it expects an async completion that never happens. Fix this by unconditionally clearing the flags field. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Cc: #v3.2+ Signed-off-by: Julian Wiedmann Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/cio: clear timer when terminating driver I/O

2018-05-30T05:47:34+00:00

[ Upstream commit 410d5e13e7638bc146321671e223d56495fbf3c7 ] When we terminate driver I/O (because we need to stop using a certain channel path) we also need to ensure that a timer (which may have been set up using ccw_device_start_timeout) is cleared. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

s390/cio: fix return code after missing interrupt

2018-05-30T05:47:34+00:00

[ Upstream commit 770b55c995d171f026a9efb85e71e3b1ea47b93d ] When a timeout occurs for users of ccw_device_start_timeout we will stop the IO and call the drivers int handler with the irb pointer set to ERR_PTR(-ETIMEDOUT). Sometimes however we'd set the irb pointer to ERR_PTR(-EIO) which is not intended. Just set the correct value in all codepaths. Reported-by: Julian Wiedmann Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

s390/qdio: don't merge ERROR output buffers

2018-04-24T07:29:24+00:00

commit 0cf1e05157b9e5530dcc3ca9fec9bf617fc93375 upstream. On an Output queue, both EMPTY and PENDING buffer states imply that the buffer is ready for completion-processing by the upper-layer drivers. So for a non-QEBSM Output queue, get_buf_states() merges mixed batches of PENDING and EMPTY buffers into one large batch of EMPTY buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING from EMPTY by inspecting the slsb_state for QDIO_OUTBUF_STATE_FLAG_PENDING. But the merge logic in get_buf_states() contains a bug that causes us to erronously also merge ERROR buffers into such a batch of EMPTY buffers (ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY). Effectively, most outbound ERROR buffers are currently discarded silently and processed as if they had succeeded. Note that this affects _all_ non-QEBSM device types, not just IQD with CQ. Fix it by explicitly spelling out the exact conditions for merging. For extracting the "get initial state" part out of the loop, this relies on the fact that get_buf_states() is never called with a count of 0. The QEBSM path already strictly requires this, and the two callers with variable 'count' make sure of it. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Cc: #v3.2+ Signed-off-by: Julian Wiedmann Reviewed-by: Ursula Braun Reviewed-by: Benjamin Block Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/qdio: don't retry EQBS after CCQ 96

2018-04-24T07:29:24+00:00

commit dae55b6fef58530c13df074bcc182c096609339e upstream. Immediate retry of EQBS after CCQ 96 means that we potentially misreport the state of buffers inspected during the first EQBS call. This occurs when 1. the first EQBS finds all inspected buffers still in the initial state set by the driver (ie INPUT EMPTY or OUTPUT PRIMED), 2. the EQBS terminates early with CCQ 96, and 3. by the time that the second EQBS comes around, the state of those previously inspected buffers has changed. If the state reported by the second EQBS is 'driver-owned', all we know is that the previous buffers are driver-owned now as well. But we can't tell if they all have the same state. So for instance - the second EQBS reports OUTPUT EMPTY, but any number of the previous buffers could be OUTPUT ERROR by now, - the second EQBS reports OUTPUT ERROR, but any number of the previous buffers could be OUTPUT EMPTY by now. Effectively, this can result in both over- and underreporting of errors. If the state reported by the second EQBS is 'HW-owned', that doesn't guarantee that the previous buffers have not been switched to driver-owned in the mean time. So for instance - the second EQBS reports INPUT EMPTY, but any number of the previous buffers could be INPUT PRIMED (or INPUT ERROR) by now. This would result in failure to process pending work on the queue. If it's the final check before yielding initiative, this can cause a (temporary) queue stall due to IRQ avoidance. Fixes: 25f269f17316 ("[S390] qdio: EQBS retry after CCQ 96") Cc: #v3.2+ Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/qdio: clear DSCI prior to scanning multiple input queues

2017-04-18T05:55:53+00:00

commit 1e4a382fdc0ba8d1a85b758c0811de3a3631085e upstream. For devices with multiple input queues, tiqdio_call_inq_handlers() iterates over all input queues and clears the device's DSCI during each iteration. If the DSCI is re-armed during one of the later iterations, we therefore do not scan the previous queues again. The re-arming also raises a new adapter interrupt. But its handler does not trigger a rescan for the device, as the DSCI has already been erroneously cleared. This can result in queue stalls on devices with multiple input queues. Fix it by clearing the DSCI just once, prior to scanning the queues. As the code is moved in front of the loop, we also need to access the DSCI directly (ie irq->dsci) instead of going via each queue's parent pointer to the same irq. This is not a functional change, and a follow-up patch will clean up the other users. In practice, this bug only affects CQ-enabled HiperSockets devices, ie. devices with sysfs-attribute "hsuid" set. Setting a hsuid is needed for AF_IUCV socket applications that use HiperSockets communication. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Reviewed-by: Ursula Braun Signed-off-by: Julian Wiedmann Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2014-10-15T05:48:18+00:00

Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...

Merge branch 'akpm' (patches from Andrew Morton)

2014-10-14T01:54:50+00:00

Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton : (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...

s390/cio: replace strnicmp with strncasecmp

2014-10-14T00:18:25+00:00

The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes Cc: Sebastian Ott Cc: Peter Oberparleiter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

s390/nohz: use a per-cpu flag for arch_needs_cpu

2014-10-09T07:14:02+00:00

Move the nohz_delay bit from the s390_idle data structure to the per-cpu flags. Clear the nohz delay flag in __cpu_disable and remove the cpu hotplug notifier that used to do this. Signed-off-by: Martin Schwidefsky