kernel/git/stable/linux.git/drivers/s390/net, branch linux-5.4.y

s390/ctcm: Fix double-kfree

2025-12-03T11:45:20+00:00

[ Upstream commit da02a1824884d6c84c5e5b5ac373b0c9e3288ec2 ] The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo. After that a call to function 'kfree' in function 'ctcmpc_unpack_skb' frees it again. Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'. Bug detected by the clang static analyzer. Fixes: 0c0b20587b9f25a2 ("s390/ctcm: fix potential memory leak") Reviewed-by: Aswin Karuvally Signed-off-by: Aleksei Nikiforov Signed-off-by: Aswin Karuvally Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251112182724.1109474-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

s390/qeth: Fix potential loss of L3-IP@ in case of network issues

2024-03-01T12:13:34+00:00

[ Upstream commit 2fe8a236436fe40d8d26a1af8d150fc80f04ee1a ] Symptom: In case of a bad cable connection (e.g. dirty optics) a fast sequence of network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth interface. In case of a second DOWN while recovery is still ongoing, it can happen that the IP@ of a Layer3 qeth interface is lost and will not be recovered by the second UP. Problem: When registration of IP addresses with Layer 3 qeth devices fails, (e.g. because of bad address format) the respective IP address is deleted from its hash-table in the driver. If registration fails because of a ENETDOWN condition, the address should stay in the hashtable, so a subsequent recovery can restore it. 3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure") fixes this for registration failures during normal operation, but not during recovery. Solution: Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE, i.e. for some reason the card already/still has this address registered. Fixes: 4a71df50047f ("qeth: new qeth device driver") Cc: stable@vger.kernel.org Signed-off-by: Alexandra Winter Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

s390/lcs: Fix return type of lcs_start_xmit()

2023-01-18T10:41:36+00:00

[ Upstream commit bb16db8393658e0978c3f0d30ae069e878264fa3 ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter Reviewed-by: Kees Cook Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/netiucv: Fix return type of netiucv_tx()

2023-01-18T10:41:36+00:00

[ Upstream commit 88d86d18d7cf7e9137c95f9d212bb9fff8a1b4be ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netiucv_tx, ^~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter Reviewed-by: Kees Cook Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/ctcm: Fix return type of ctc{mp,}m_tx()

2023-01-18T10:41:36+00:00

[ Upstream commit aa5bf80c3c067b82b4362cd6e8e2194623bcaca6 ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcm_tx, ^~~~~~~ drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcmpc_tx, ^~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter Reviewed-by: Kees Cook Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/lcs: fix variable dereferenced before check

2022-05-18T07:47:25+00:00

[ Upstream commit 671bb35c8e746439f0ed70815968f9a4f20a8deb ] smatch complains about drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739) Fixes: 27eb5ac8f015 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]") Signed-off-by: Alexandra Winter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/ctcm: fix potential memory leak

2022-05-18T07:47:25+00:00

[ Upstream commit 0c0b20587b9f25a2ad14db7f80ebe49bdf29920a ] smatch complains about drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo' mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in ctcmpc_unpack_skb(). Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Signed-off-by: Alexandra Winter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/ctcm: fix variable dereferenced before check

2022-05-18T07:47:25+00:00

[ Upstream commit 2c50c6867c85afee6f2b3bcbc50fc9d0083d1343 ] Found by cppcheck and smatch. smatch complains about drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42) Fixes: 3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions") Reported-by: Colin Ian King Signed-off-by: Alexandra Winter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/qeth: fix L2 header access in qeth_l3_osa_features_check()

2021-01-17T13:05:32+00:00

[ Upstream commit f9c4845385c8f6631ebd5dddfb019ea7a285fba4 ] ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

s390/qeth: fix tear down of async TX buffers

2020-12-02T07:49:51+00:00

[ Upstream commit 7ed10e16e50daf74460f54bc922e27c6863c8d61 ] When qeth_iqd_tx_complete() detects that a TX buffer requires additional async completion via QAOB, it might fail to replace the queue entry's metadata (and ends up triggering recovery). Assume now that the device gets torn down, overruling the recovery. If the QAOB notification then arrives before the tear down has sufficiently progressed, the buffer state is changed to QETH_QDIO_BUF_HANDLED_DELAYED by qeth_qdio_handle_aob(). The tear down code calls qeth_drain_output_queue(), where qeth_cleanup_handled_pending() will then attempt to replace such a buffer _again_. If it succeeds this time, the buffer ends up dangling in its replacement's ->next_pending list ... where it will never be freed, since there's no further call to qeth_cleanup_handled_pending(). But the second attempt isn't actually needed, we can simply leave the buffer on the queue and re-use it after a potential recovery has completed. The qeth_clear_output_buffer() in qeth_drain_output_queue() will ensure that it's in a clean state again. Fixes: 72861ae792c2 ("qeth: recovery through asynchronous delivery") Signed-off-by: Julian Wiedmann Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin