kernel/git/stable/linux.git/drivers/s390, branch linux-5.5.y

scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point

2020-04-17T14:12:12+00:00

commit 819732be9fea728623e1ed84eba28def7384ad1f upstream. v2.6.27 commit cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports") introduced zfcp automatic port scan. Before that, the user had to use the sysfs attribute "port_add" of an FCP device (adapter) to add and open remote (target) ports, even for the remote peer port in point-to-point topology. That code path did a proper port open recovery trigger taking the erp_lock. Since above commit, a new helper function zfcp_erp_open_ptp_port() performed an UNlocked port open recovery trigger. This can race with other parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt e.g. adapter->erp_total_count or adapter->erp_ready_head. As already found for fabric topology in v4.17 commit fa89adba1941 ("scsi: zfcp: fix infinite iteration on ERP ready list"), there was an endless loop during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54ace3 ("scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger") introduced a lockdep assertion for that case. As a side effect, that lockdep assertion now uncovered the unlocked code path for PtP. It is from within an adapter ERP action: zfcp_erp_strategy[1479] intentionally DROPs erp lock around zfcp_erp_strategy_do_action() zfcp_erp_strategy_do_action[1441] NO erp lock zfcp_erp_adapter_strategy[876] NO erp lock zfcp_erp_adapter_strategy_open[855] NO erp lock zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around zfcp_erp_action_to_running(), BUT *_not_* around zfcp_erp_enqueue_ptp_port() zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock _zfcp_erp_port_reopen[432] assumes to be called with erp lock zfcp_erp_action_enqueue[314] assumes to be called with erp lock zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock: lockdep_assert_held(&adapter->erp_lock); It causes the following lockdep warning: WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x16a/0x188 no locks held by zfcperp0.0.17c0/775. Fix this by using the proper locked recovery trigger helper function. Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com Fixes: cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports") Cc: #v2.6.27+ Reviewed-by: Jens Remus Reviewed-by: Benjamin Block Signed-off-by: Steffen Maier Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

s390/dasd: fix data corruption for thin provisioned devices

2020-03-18T06:19:12+00:00

commit 5e6bdd37c5526ef01326df5dabb93011ee89237e upstream. Devices are formatted in multiple of tracks. For an Extent Space Efficient (ESE) volume we get errors when accessing unformatted tracks. In this case the driver either formats the track on the flight for write requests or returns zero data for read requests. In case a request spans multiple tracks, the indication of an unformatted track presented for the first track is incorrectly applied to all tracks covered by the request. As a result, tracks containing data will be handled as empty, resulting in zero data being returned on read, or overwriting existing data with zero on write. Fix by determining the track that gets the NRF error. For write requests only format the track that is surely not formatted. For Read requests all tracks before have returned valid data and should not be touched. All tracks after the unformatted track might be formatted or not. Those are returned to the blocklayer to build a new request. When using alias devices there is a chance that multiple write requests trigger a format of the same track which might lead to data loss. Ensure that a track is formatted only once by maintaining a list of currently processed tracks. Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Reviewed-by: Peter Oberparleiter Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

s390/qeth: handle error when backing RX buffer

2020-03-18T06:19:06+00:00

[ Upstream commit 17413852804d7e86e6f0576cca32c1541817800e ] qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: don't reset default_out_queue

2020-03-18T06:19:05+00:00

[ Upstream commit 240c1948491b81cfe40f84ea040a8f2a4966f101 ] When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qdio: fill SL with absolute addresses

2020-03-12T06:18:27+00:00

[ Upstream commit e9091ffd6a0aaced111b5d6ead5eaab5cd7101bc ] As the comment says, sl->sbal holds an absolute address. qeth currently solves this through wild casting, while zfcp doesn't care. Handle this properly in the code that actually builds the SL. Signed-off-by: Julian Wiedmann Reviewed-by: Alexandra Winter Reviewed-by: Steffen Maier [for qdio] Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin

s390/cio: cio_ignore_proc_seq_next should increase position index

2020-03-12T06:18:26+00:00

[ Upstream commit 8b101a5e14f2161869636ff9cb4907b7749dc0c2 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Link: https://lore.kernel.org/r/d44c53a7-9bc1-15c7-6d4a-0c10cb9dffce@virtuozzo.com Reviewed-by: Cornelia Huck Signed-off-by: Christian Borntraeger Signed-off-by: Vasily Averin Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin

s390/qeth: fix off-by-one in RX copybreak check

2020-03-05T15:45:19+00:00

commit 54a61fbc020fd2e305680871c453abcf7fc0339b upstream. The RX copybreak is intended as the _max_ value where the frame's data should be copied. So for frame_len == copybreak, don't build an SG skb. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: vnicc Fix EOPNOTSUPP precedence

2020-03-05T15:45:19+00:00

commit 6f3846f0955308b6d1b219419da42b8de2c08845 upstream. When getting or setting VNICC parameters, the error code EOPNOTSUPP should have precedence over EBUSY. EBUSY is used because vnicc feature and bridgeport feature are mutually exclusive, which is a temporary condition. Whereas EOPNOTSUPP indicates that the HW does not support all or parts of the vnicc feature. This issue causes the vnicc sysfs params to show 'blocked by bridgeport' for HW that does not support VNICC at all. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

scsi: zfcp: fix wrong data and display format of SFP+ temperature

2020-03-05T15:45:14+00:00

commit a3fd4bfe85fbb67cf4ec1232d0af625ece3c508b upstream. When implementing support for retrieval of local diagnostic data from the FCP channel, the wrong data format was assumed for the temperature of the local SFP+ connector. The Fibre Channel Link Services (FC-LS-3) specification is not clear on the format of the stored integer, and only after consulting the SNIA specification SFF-8472 did we realize it is stored as two's complement. Thus, the used data and display format is wrong, and highly misleading for users when the temperature should drop below 0°C (however unlikely that may be). To fix this, change the data format in `struct fsf_qtcb_bottom_port` from unsigned to signed, and change the printf format string used to generate `zfcp_sysfs_adapter_diag_sfp_temperature_show()` from `%hu` to `%hd`. Link: https://lore.kernel.org/r/d6e3be5428da5c9490cfff4df7cae868bc9f1a7e.1582039501.git.bblock@linux.ibm.com Fixes: a10a61e807b0 ("scsi: zfcp: support retrieval of SFP Data via Exchange Port Data") Fixes: 6028f7c4cd87 ("scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver") Cc: # 5.5+ Reviewed-by: Jens Remus Reviewed-by: Fedor Loshakov Reviewed-by: Steffen Maier Signed-off-by: Benjamin Block Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

s390/zcrypt: fix card and queue total counter wrap

2020-03-05T15:45:06+00:00

[ Upstream commit fcd98d4002539f1e381916fc1b6648938c1eac76 ] The internal statistic counters for the total number of requests processed per card and per queue used integers. So they do wrap after a rather huge amount of crypto requests processed. This patch introduces uint64 counters which should hold much longer but still may wrap. The sysfs attributes request_count for card and queue also used only %ld and now display the counter value with %llu. This is not a security relevant fix. The int overflow which happened is not in any way exploitable as a security breach. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin