kernel/git/stable/linux.git/drivers/scsi/isci, branch linux-3.2.y

Revert "isci: fix reset timeout handling"

2014-04-30T15:23:27+00:00

This reverts commit 584ec12265192bf49dfa270d517380f6723a6956, which was commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream. It causes boot failure on 3.2 although no such problem occurs upstream. Reported-by: Ondrej Zary Signed-off-by: Ben Hutchings Acked-by: Dan Williams

isci: correct erroneous for_each_isci_host macro

2014-04-01T23:58:58+00:00

commit c59053a23d586675c25d789a7494adfdc02fba57 upstream. In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[] [] __list_add+0x1b/0xc0 Call Trace: [] __mutex_lock_slowpath+0x114/0x1b0 [] mutex_lock+0x1f/0x30 [] sas_disable_events+0x1b/0x50 [libsas] [] sas_unregister_ha+0x18/0x60 [libsas] [] isci_unregister+0x1e/0x40 [isci] [] isci_pci_remove+0x5d/0x100 [isci] [] pci_device_remove+0x3b/0xb0 [] __device_release_driver+0x7f/0xf0 [] driver_detach+0xa8/0xb0 [] bus_remove_driver+0x9b/0x120 [] driver_unregister+0x2c/0x50 [] pci_unregister_driver+0x23/0x80 [] isci_exit+0x10/0x1e [isci] [] SyS_delete_module+0x16b/0x2d0 [] ? do_notify_resume+0x61/0xa0 [] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau Reviewed-by: Maciej Patelczyk Tested-by: Lukasz Dorau Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Ben Hutchings

isci: fix reset timeout handling

2014-04-01T23:58:58+00:00

commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream. Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Acked-by: Lukasz Dorau Reported-by: David Milburn Reported-by: Xun Ni Tested-by: Xun Ni Signed-off-by: Dan Williams Signed-off-by: James Bottomley [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

isci: Fix a race condition in the SSP task management path

2013-08-02T20:15:04+00:00

commit 96f15f29038e58e1b0a96483e2b369ff446becf1 upstream. This commit fixes a race condition in the isci driver abort task and SSP device task management path. The race is caused when an I/O termination in the SCU hardware is necessary because of an SSP target timeout condition, and the check of the I/O end state races against the HW-termination-driven end state. The failure of the race meant that no TMF was sent to the device to clean-up the pending I/O. Signed-off-by: Jeff Skirvin Reviewed-by: Lukasz Dorau Signed-off-by: James Bottomley [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

efi: Make 'efi_enabled' a function to query EFI facilities

2013-02-06T04:33:50+00:00

commit 83e68189745ad931c2afd45d8ee3303929233e7f upstream. Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Cc: David Airlie Cc: Corentin Chary Cc: Matthew Garrett Cc: Dave Jiang Cc: Olof Johansson Cc: Peter Jones Cc: Colin Ian King Cc: Steve Langasek Cc: Tony Luck Cc: Konrad Rzeszutek Wilk Cc: Rafael J. Wysocki Signed-off-by: Matt Fleming Signed-off-by: H. Peter Anvin [bwh: Backported to 3.2: - Adjust context (a lot) - Add efi_is_native() function from commit 5189c2a7c776 ('x86: efi: Turn off efi_enabled after setup on mixed fw/kernel') - Make efi_init() bail out when booted non-native, as it would previously not be called in this case - Drop inapplicable changes to start_kernel()] Signed-off-by: Ben Hutchings

isci: copy fis 0x34 response into proper buffer

2012-12-06T11:20:23+00:00

commit 49bd665c5407a453736d3232ee58f2906b42e83c upstream. SATA MICROCODE DOWNALOAD fails on isci driver. After receiving Register Device to Host (FIS 0x34) frame Initiator resets phy. In the frame handler routine response (FIS 0x34) was copied into wrong buffer and upper layer did not receive any answer which resulted in timeout and reset. This patch corrects this bug. Signed-off-by: Maciej Patelczyk Signed-off-by: Lukasz Dorau Signed-off-by: James Bottomley Signed-off-by: Ben Hutchings

isci: fix isci_pci_probe() generates warning on efi failure path

2012-10-17T02:34:07+00:00

commit 6d70a74ffd616073a68ae0974d98819bfa8e6da6 upstream. The oem parameter image embedded in the efi variable is at an offset from the start of the variable. However, in the failure path we try to free the 'orom' pointer which is only valid when the paramaters are being read from the legacy option-rom space. Since failure to load the oem parameters is unlikely and we keep the memory around in the success case just defer all de-allocation to devm. Reported-by: Don Morris Signed-off-by: Dan Williams Signed-off-by: Ben Hutchings

isci: fix oem parameter validation on single controller skus

2012-05-30T23:43:29+00:00

commit fc25f79af321c01a739150ba2c09435cf977a63d upstream. OEM parameters [1] are parsed from the platform option-rom / efi driver. By default the driver was validating the parameters for the dual-controller case, but in single-controller case only the first set of parameters may be valid. Limit the validation to the number of actual controllers detected otherwise the driver may fail to parse the valid parameters leading to driver-load or runtime failures. [1] the platform specific set of phy address, configuration,and analog tuning values [stable v3.0+] Reported-by: Dave Jiang Tested-by: Dave Jiang Signed-off-by: Dan Williams [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

[SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)

2011-10-31T09:23:18+00:00

Fixes bug where max_concurr_spinup oem parameter should be overriden by max_concurr_spinup user parameter. Override should happen only when max_concurr_spinup user parameter is specified in command line (greater than 0). Also this fix shortens variables representing max_conxurr_spinup for oem and user parameters. Signed-off-by: Andrzej Jakowski Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] isci: revert bcn filtering

2011-10-31T09:23:01+00:00

The initial bcn filtering implementation was validated on a kernel baseline that predated the switch to new libata error handling. Also, prior to that conversion we borrowed the mvsas MVS_DEV_EH approach to prevent the unwanted extra ap->ops->phy_reset(ap) that occurred in the ata_bus_probe() path. After the conversion to new libata eh resets at discovery are more frequent and get filtered prematurely by IDEV_EH. The result is that our bcn filtering has been blocked from running and at discovery and it appears to stall discovery completion to the point of triggering hung task timeouts. So, revert the implementation for now. When it returns it will go into libsas proper. The domain rediscovery that takes place due to ->lldd_I_T_nexus_reset() events should now be properly waited for by the ata_port_wait_eh() call in ata_port_probe(). So the hard coded delay in the isci ->lldd_I_T_nexus_reset() and other libsas drivers should help debounce the libsas thread from seeing temporary device removals. Signed-off-by: Dan Williams Signed-off-by: James Bottomley