kernel/git/stable/linux.git/drivers/scsi/sd.c, branch linux-4.10.y

scsi: sd: Fix capacity calculation with 32-bit sector_t

2017-04-21T07:32:39+00:00

commit 7c856152cb92f8eee2df29ef325a1b1f43161aff upstream. We previously made sure that the reported disk capacity was less than 0xffffffff blocks when the kernel was not compiled with large sector_t support (CONFIG_LBDAF). However, this check assumed that the capacity was reported in units of 512 bytes. Add a sanity check function to ensure that we only enable disks if the entire reported capacity can be expressed in terms of sector_t. Reported-by: Steve Magnani Cc: Bart Van Assche Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable

2017-04-21T07:32:39+00:00

commit 6780414519f91c2a84da9baa963a940ac916f803 upstream. If device reports a small max_xfer_blocks and a zero opt_xfer_blocks, we end up using BLK_DEF_MAX_SECTORS, which is wrong and r/w of that size may get error. [mkp: tweaked to avoid setting rw_max twice and added typecast] Fixes: ca369d51b3e ("block/sd: Fix device-imposed transfer length limits") Signed-off-by: Fam Zheng Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: sd: Check for unaligned partial completion

2017-03-30T07:44:10+00:00

commit c46f09175dabd5dd6a1507f36250bfa734a0156e upstream. Commit ("mpt3sas: Force request partial completion alignment") was not considering the case of commands not operating on logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned partial replies). In this case, forcing alignment of resid to the device logical block size can break the command result, e.g. in the case of REQ_OP_ZONE_REPORT, the exact number of zone reported by the device. Move the partial completion alignement check of mpt3sas to a generic implementation in sd_done(). The check is added within the default section of the initial req_op() switch case so that the report and reset zone commands are ignored. In addition, as sd_done() is not called for passthrough requests, resid corrections are not done as intended by the initial mpt3sas patch. Fixes: f2e767bb5d6e ("mpt3sas: Force request partial completion alignment") Signed-off-by: Damien Le Moal Acked-by: Christoph Hellwig Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

Revert "sd: remove __data_len hack for WRITE SAME"

2017-01-26T17:01:20+00:00

This patch reverts commit f80de881d8df and avoids that sending a WRITE SAME command to the iSCSI initiator triggers the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000014 TARGET_CORE[iSCSI]: Expected Transfer Length: 260096 does not match SCSI CDB Length: 512 for SAM Opcode: 0x41 IP: iscsi_tcp_segment_done+0x20b/0x310 [libiscsi_tcp] Oops: 0000 [#1] SMP Modules linked in: target_core_user uio target_core_iblock target_core_file iscsi_target_mod target_core_mod netconsole configfs crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper virtio_console virtio_rng virtio_balloon serio_raw i2c_piix4 acpi_cpufreq button iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ext4 jbd2 mbcache virtio_blk virtio_net psmouse floppy drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_pci CPU: 2 PID: 5 Comm: kworker/u8:0 Not tainted 4.10.0-rc5-debug+ #3 Workqueue: iscsi_q_0 iscsi_xmitworker [libiscsi] RIP: 0010:iscsi_tcp_segment_done+0x20b/0x310 [libiscsi_tcp] Call Trace: iscsi_sw_tcp_xmit_segment+0x84/0x120 [iscsi_tcp] iscsi_sw_tcp_pdu_xmit+0x51/0x180 [iscsi_tcp] iscsi_tcp_task_xmit+0xb3/0x290 [libiscsi_tcp] iscsi_xmit_task+0x4e/0xc0 [libiscsi] iscsi_xmitworker+0x243/0x330 [libiscsi] process_one_work+0x1d8/0x4b0 worker_thread+0x49/0x4a0 kthread+0x102/0x140 Fixes: f80de881d8df ("sd: remove __data_len hack for WRITE SAME") Signed-off-by: Bart Van Assche Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Jens Axboe Cc: Lee Duncan Cc: Chris Leech Acked-by: Christoph Hellwig Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-01-20T19:47:18+00:00

Pull SCSI fixes from James Bottomley: "This is a set of 12 fixes including the mpt3sas one that was causing hangs on ATA passthrough. The others are a couple of zoned block device fixes, a SAS device detection bug which lead to SATA drives not being matched to bays, two qla2xxx MSI fixes, a qla2xxx req for rsp confusion caused by cut and paste, and a few other minor fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: fix hang on ata passthrough commands scsi: lpfc: Set elsiocb contexts to NULL after freeing it scsi: sd: Ignore zoned field for host-managed devices scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type scsi: bfa: fix wrongly initialized variable in bfad_im_bsg_els_ct_request() scsi: ses: Fix SAS device detection in enclosure scsi: libfc: Fix variable name in fc_set_wwpn scsi: lpfc: avoid double free of resource identifiers scsi: qla2xxx: remove irq_affinity_notifier scsi: qla2xxx: fix MSI-X vector affinity scsi: qla2xxx: Fix apparent cut-n-paste error. scsi: qla2xxx: Get mutex lock before checking optrom_state

Merge remote-tracking branch 'mkp-scsi/fixes' into fixes

2017-01-17T22:32:54+00:00

scsi: sd: Ignore zoned field for host-managed devices

2017-01-17T19:06:22+00:00

There is no good match of the zoned field of the block device characteristics page for host-managed devices. For these devices, the zoning model is derived directly from the device type. So ignore the zoned field for these drives. [mkp: typo] Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type

2017-01-17T19:05:02+00:00

Zoned block devices force the use of READ/WRITE(16) commands by setting sdkp->use_16_for_rw and clearing sdkp->use_10_for_rw. This result in DPOFUA always being disabled for these drives as the assumed use of the deprecated READ/WRITE(6) commands only looks at sdkp->use_10_for_rw. Strenghten the test by also checking that sdkp->use_16_for_rw is false. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

sd: remove __data_len hack for WRITE SAME

2017-01-13T22:17:04+00:00

Now that we have the blk_rq_payload_bytes helper available to determine the actual I/O size we don't need to mess around with __data_len for WRITE SAME. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds