kernel/git/stable/linux.git/drivers/scsi, branch linux-4.4.y

scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()

2022-02-03T08:27:53+00:00

commit 847f9ea4c5186fdb7b84297e3eeed9e340e83fce upstream. The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang Co-developed-by: Maurizio Lombardi Signed-off-by: Maurizio Lombardi Signed-off-by: John Meneghini Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: sr: Don't use GFP_DMA

2022-01-27T07:46:19+00:00

[ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ] The allocated buffers are used as a command payload, for which the block layer and/or DMA API do the proper bounce buffering if needed. Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de Reported-by: Baoquan He Reviewed-by: Baoquan He Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

2022-01-11T12:37:11+00:00

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ] |- iscsi_if_destroy_conn |-dev_attr_show |-iscsi_conn_teardown |-spin_lock_bh |-iscsi_sw_tcp_conn_get_param |-kfree(conn->persistent_address) |-iscsi_conn_get_param |-kfree(conn->local_ipaddr) ==>|-read persistent_address ==>|-read local_ipaddr |-spin_unlock_bh When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a UAF may be triggered. Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com Reported-by: Lu Tixiong Reviewed-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Lixiaokeng Signed-off-by: Linfeilong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: vmw_pvscsi: Set residual data length conditionally

2022-01-05T11:30:27+00:00

commit 142c779d05d1fef75134c3cb63f52ccbc96d9e1f upstream. The PVSCSI implementation in the VMware hypervisor under specific configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen in the completion descriptor for READ CAPACITY(16). As a result, the kernel can not detect proper disk geometry. This can be recognized by the kernel message: [ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512. The PVSCSI implementation in QEMU does not set dataLen at all, keeping it zeroed. This leads to a boot hang as was reported by Shmulik Ladkani. It is likely that the controller returns the garbage at the end of the buffer. Residual length should be set by the driver in that case. The SCSI layer will erase corresponding data. See commit bdb2b8cab439 ("[SCSI] erase invalid data returned by device") for details. Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length") introduced the issue by setting residual length unconditionally, causing the SCSI layer to erase the useful payload beyond dataLen when this value is returned as 0. As a result, considering existing issues in implementations of PVSCSI controllers, we do not want to call scsi_set_resid() when dataLen == 0. Calling scsi_set_resid() has no effect if dataLen equals buffer length. Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/ Link: https://lore.kernel.org/r/20211220190514.55935-1-amakhalov@vmware.com Fixes: e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length") Cc: Matt Wang Cc: Martin K. Petersen Cc: Vishal Bhakta Cc: VMware PV-Drivers Cc: James E.J. Bottomley Cc: linux-scsi@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-suggested-by: Shmulik Ladkani Signed-off-by: Alexey Makhalov Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: iscsi: Unblock session then wake up error handler

2021-12-08T07:44:07+00:00

[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ] We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states. For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running. Set the device state then call into libiscsi to wake up the error handler. Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: mpt3sas: Fix kernel panic during drive powercycle test

2021-12-08T07:44:05+00:00

[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ] While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: advansys: Fix kernel pointer leak

2021-11-26T10:58:42+00:00

[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ] Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer. Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn Signed-off-by: Guo Zhi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

2021-11-26T10:58:42+00:00

[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ] When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure. Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qla2xxx: Turn off target reset during issue_lip

2021-11-26T10:58:41+00:00

[ Upstream commit 0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ] When user uses issue_lip to do link bounce, driver sends additional target reset to remote device before resetting the link. The target reset would affect other paths with active I/Os. This patch will remove the unnecessary target reset. Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine") Reviewed-by: Himanshu Madhani Signed-off-by: Quinn Tran Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()

2021-11-26T10:58:40+00:00

[ Upstream commit f4875d509a0a78ad294a1a538d534b5ba94e685a ] This variable is just a temporary variable, used to do an endian conversion. The problem is that the last byte is not initialized. After the conversion is completely done, the last byte is discarded so it doesn't cause a problem. But static checkers and the KMSan runtime checker can detect the uninitialized read and will complain about it. Link: https://lore.kernel.org/r/20211006073242.GA8404@kili Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.") Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin