kernel/git/stable/linux.git/drivers/scsi, branch linux-5.13.y

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

2021-09-18T11:42:21+00:00

commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream. The first invocation of function find_first_zero_bit will return 0 and queue_id gets set to 0. An index of queue_pair_map also gets set to 0. qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); set_bit(qpair_id, ha->qpair_qid_map); ha->queue_pair_map[qpair_id] = qpair; In the alloc_queue callback driver checks the map, if queue is already allocated: ha->queue_pair_map[qidx] This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8) since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus is less than 8, max_qpairs is less than 8. This creates wrong value returned as qpair. [ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2 [ 1572.354458] general protection fault: 0000 [#1] SMP PTI [ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1 [ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013 [ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn [ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx] [ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0 [ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246 [ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001 [ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800 [ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800 [ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000 [ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000 [ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000 [ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0 [ 1572.354497] Call Trace: [ 1572.354503] ? check_preempt_curr+0x62/0x90 [ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0 [ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc] [ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730 [ 1572.354515] ? __switch_to_asm+0x35/0x70 [ 1572.354516] ? __switch_to_asm+0x41/0x70 [ 1572.354518] ? __switch_to_asm+0x35/0x70 [ 1572.354519] ? __switch_to_asm+0x41/0x70 [ 1572.354521] ? __switch_to_asm+0x35/0x70 [ 1572.354522] ? __switch_to_asm+0x41/0x70 [ 1572.354523] ? __switch_to_asm+0x35/0x70 [ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca [ 1572.354527] ? __switch_to_asm+0x41/0x70 [ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170 [ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60 [ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0 [ 1572.354535] ? process_one_work+0x1a7/0x360 [ 1572.354537] ? create_worker+0x1a0/0x1a0 [ 1572.354538] ? worker_thread+0x30/0x390 [ 1572.354540] ? create_worker+0x1a0/0x1a0 [ 1572.354541] ? kthread+0x116/0x130 [ 1572.354543] ? kthread_flush_work_fn+0x10/0x10 [ 1572.354545] ? ret_from_fork+0x35/0x40 Fix is to use index 0 for admin and first IO queue. Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Changes to support kdump kernel

2021-09-18T11:42:20+00:00

commit 62e0dec59c1e139dab55aff5aa442adc97804271 upstream. Avoid allocating firmware dump and only allocate a single queue for a kexec kernel. Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: BusLogic: Fix missing pr_cont() use

2021-09-18T11:42:20+00:00

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream. Update BusLogic driver's messaging system to use pr_cont() for continuation lines, bringing messy output: pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17 scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level scsi0: PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic , Untagged Queue Depth: 3 scsi0: SCSI Bus Termination: Both Enabled , SCAM: Disabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi host0: BusLogic BT-958 back to order: pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17 scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level scsi0: PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: SCSI Bus Termination: Both Enabled, SCAM: Disabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi host0: BusLogic BT-958 Also diagnostic output such as with the BusLogic=TraceConfiguration parameter is affected and becomes vertical and therefore hard to read. This has now been corrected, e.g.: pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17 blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00 blogic_cmd(95) Status = 28: (Modify I/O Address) blogic_cmd(91) Status = 30: 1 ==> 1: 01 blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30 blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30 blogic_cmd(0B) Status = 30: 3 ==> 3: 00 08 07 blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00 blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D blogic_cmd(84) Status = 30: 1 ==> 1: 37 blogic_cmd(8B) Status = 30: 5 ==> 5: 39 35 38 20 20 blogic_cmd(85) Status = 30: 1 ==> 1: 42 blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00 blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter etc. Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") Cc: stable@vger.kernel.org # v4.9+ Acked-by: Khalid Aziz Signed-off-by: Maciej W. Rozycki Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: ufs: ufs-exynos: Fix static checker warning

2021-09-18T11:41:55+00:00

[ Upstream commit 313bf281f2091552f509fd05a74172c70ce7572f ] clk_get_rate() returns unsigned long and currently this driver stores the return value in u32 type, resulting the below warning: Fixed smatch warnings: drivers/scsi/ufs/ufs-exynos.c:286 exynos_ufs_get_clk_info() warn: wrong type for 'ufs->mclk_rate' (should be 'ulong') drivers/scsi/ufs/ufs-exynos.c:287 exynos_ufs_get_clk_info() warn: wrong type for 'pclk_rate' (should be 'ulong') Link: https://lore.kernel.org/r/20210819171131.55912-1-alim.akhtar@samsung.com Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs") Reported-by: Dan Carpenter Signed-off-by: Alim Akhtar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qedf: Fix error codes in qedf_alloc_global_queues()

2021-09-18T11:41:54+00:00

[ Upstream commit ccc89737aa6b9f248cf1623014038beb6c2b7f56 ] This driver has some left over "return 1" on failure style code mixed with "return negative error codes" style code. The caller doesn't care so we should just convert everything to return negative error codes. Then there was a problem that there were two variables used to store error codes which just resulted in confusion. If qedf_alloc_bdq() returned a negative error code, we accidentally returned success instead of propagating the error code. So get rid of the "rc" variable and use "status" every where. Also remove the "status = 0" initialization so that these sorts of bugs will be detected by the compiler in the future. Link: https://lore.kernel.org/r/20210810085023.GA23998@kili Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Acked-by: Manish Rangankar Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qedi: Fix error codes in qedi_alloc_global_queues()

2021-09-18T11:41:54+00:00

[ Upstream commit 4dbe57d46d54a847875fa33e7d05877bb341585e ] This function had some left over code that returned 1 on error instead negative error codes. Convert everything to use negative error codes. The caller treats all non-zero returns the same so this does not affect run time. A couple places set "rc" instead of "status" so those error paths ended up returning success by mistake. Get rid of the "rc" variable and use "status" everywhere. Remove the bogus "status = 0" initialization, as a future proofing measure so the compiler will warn about uninitialized error codes. Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: smartpqi: Fix an error code in pqi_get_raid_map()

2021-09-18T11:41:54+00:00

[ Upstream commit d1f6581a6796c4e9fd8a4a24e8b77463d18f0df1 ] Return -EINVAL on failure instead of success. Link: https://lore.kernel.org/r/20210810084613.GB23810@kili Fixes: a91aaae0243b ("scsi: smartpqi: allow for larger raid maps") Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fdomain: Fix error return code in fdomain_probe()

2021-09-18T11:41:53+00:00

[ Upstream commit 632c4ae6da1d629eddf9da1e692d7617c568c256 ] If request_region() fails the return value is not set. Return -EBUSY on error. Link: https://lore.kernel.org/r/20210715032625.1395495-1-liwei391@huawei.com Fixes: 8674a8aa2c39 ("scsi: fdomain: Add PCMCIA support") Reported-by: Hulk Robot Signed-off-by: Wei Li Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()

2021-09-18T11:41:51+00:00

[ Upstream commit d3d9c4570285090b533b00946b72647361f0345b ] If param_offset > buff_len then the memcpy() statement in ufshcd_read_desc_param() corrupts memory since it copies 256 + buff_len - param_offset bytes into a buffer with size buff_len. Since param_offset < 256 this results in writing past the bound of the output buffer. Link: https://lore.kernel.org/r/20210722033439.26550-2-bvanassche@acm.org Fixes: cbe193f6f093 ("scsi: ufs: Fix potential NULL pointer access during memcpy") Reviewed-by: Avri Altman Reviewed-by: Daejun Park Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: BusLogic: Use %X for u32 sized integer rather than %lX

2021-09-18T11:41:51+00:00

[ Upstream commit 2127cd21fb78c6e22d92944253afd967b0ff774d ] An earlier fix changed the print format specifier for adapter->bios_addr to use %lX. However, the integer is a u32 so the fix was wrong. Fix this by using the correct %X format specifier. Link: https://lore.kernel.org/r/20210730095031.26981-1-colin.king@canonical.com Fixes: 43622697117c ("scsi: BusLogic: use %lX for unsigned long rather than %X") Acked-by: Khalid Aziz Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen Addresses-Coverity: ("Invalid type in argument") Signed-off-by: Sasha Levin