kernel/git/stable/linux.git/drivers/soundwire, branch linux-5.12.y

soundwire: stream: Fix test for DP prepare complete

2021-07-14T15:00:24+00:00

[ Upstream commit 3d3e88e336338834086278236d42039f3cde50e1 ] In sdw_prep_deprep_slave_ports(), after the wait_for_completion() the DP prepare status register is read. If this indicates that the port is now prepared, the code should continue with the port setup. It is irrelevant whether the wait_for_completion() timed out if the port is now ready. The previous implementation would always fail if the wait_for_completion() timed out, even if the port was reporting successful prepare. This patch also fixes a minor bug where the return from sdw_read() was not checked for error - any error code with LSBits clear could be misinterpreted as a successful port prepare. Fixes: 79df15b7d37c ("soundwire: Add helpers for ports operations") Signed-off-by: Richard Fitzgerald Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210618144745.30629-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: stream: fix memory leak in stream config error path

2021-05-14T08:52:25+00:00

[ Upstream commit 48f17f96a81763c7c8bf5500460a359b9939359f ] When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. Fixes: 89e590535f32 ("soundwire: Add support for SoundWire stream management") Signed-off-by: Rander Wang Reviewed-by: Keyon Jie Reviewed-by: Guennadi Liakhovetski Reviewed-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: bus: Fix device found flag correctly

2021-05-14T08:52:23+00:00

[ Upstream commit f03690f4f6992225d05dbd1171212e5be5a370dd ] found flag is used to indicate SoundWire devices that are both enumerated on the bus and available in the device list. However this flag is not reset correctly after one iteration, This could miss some of the devices that are enumerated on the bus but not in device list. So reset this correctly to fix this issue! Fixes: d52d7a1be02c ("soundwire: Add Slave status handling helpers") Signed-off-by: Srinivas Kandagatla Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210309104816.20350-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: cadence: only prepare attached devices on clock stop

2021-05-12T06:39:36+00:00

[ Upstream commit 58ef9356260c291a4321e07ff507f31a1d8212af ] We sometimes see COMMAND_IGNORED responses during the clock stop sequence. It turns out we already have information if devices are present on a link, so we should only prepare those when they are attached. In addition, even when COMMAND_IGNORED are received, we should still proceed with the clock stop. The device will not be prepared but that's not a problem. The only case where the clock stop will fail is if the Cadence IP reports an error (including a timeout), or if the devices throw a COMMAND_FAILED response. BugLink: https://github.com/thesofproject/linux/issues/2621 Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210323013707.21455-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

ALSA: hda: move Intel SoundWire ACPI scan to dedicated module

2021-03-02T14:33:00+00:00

The ACPI scan capabilities is called from the intel-dspconfig as well as the SOF/HDaudio drivers. This creates dependencies and randconfig issues when HDaudio and SOF/SoundWire are not all configured as modules. To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and intel-dspconfig, move the ACPI scan helpers to a dedicated module. This follows the same idea as NHLT helpers which are already handled as a dedicated module. The only functional change is that the kernel parameter to filter links is now handled by a different module, but that was only provided for developers needing work-arounds for early BIOS releases. Reported-by: Arnd Bergmann Signed-off-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Reviewed-by: Bard Liao Acked-by: Mark Brown Acked-by: Vinod Koul Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai

soundwire: intel: fix possible crash when no device is detected

2021-02-11T05:19:52+00:00

acpi_walk_namespace can return success without executing our callback which initializes info->handle. If the random value in this structure is a valid address (which is on the stack, so it's quite possible), then nothing bad will happen, because: sdw_intel_scan_controller -> acpi_bus_get_device -> acpi_get_device_data -> acpi_get_data_full -> acpi_ns_validate_handle will reject this handle. However, if the value from the stack doesn't point to a valid address, we get this: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 6 PID: 472 Comm: systemd-udevd Tainted: G W 5.10.0-1-amd64 #1 Debian 5.10.4-1 Hardware name: HP HP Pavilion Laptop 15-cs3xxx/86E2, BIOS F.05 01/01/2020 RIP: 0010:acpi_ns_validate_handle+0x1a/0x23 Code: 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 1f 44 00 00 48 8d 57 ff 48 89 f8 48 83 fa fd 76 08 48 8b 05 0c b8 67 01 c3 <80> 7f 08 0f 74 02 31 c0 c3 0f 1f 44 00 00 48 8b 3d f6 b7 67 01 e8 RSP: 0000:ffffc388807c7b20 EFLAGS: 00010213 RAX: 0000000000000048 RBX: ffffc388807c7b70 RCX: 0000000000000000 RDX: 0000000000000047 RSI: 0000000000000246 RDI: 0000000000000048 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffffc0f5f4d1 R11: ffffffff8f0cb268 R12: 0000000000001001 R13: ffffffff8e33b160 R14: 0000000000000048 R15: 0000000000000000 FS: 00007f24548288c0(0000) GS:ffff9f781fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000106158004 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: acpi_get_data_full+0x4d/0x92 acpi_bus_get_device+0x1f/0x40 sdw_intel_acpi_scan+0x59/0x230 [soundwire_intel] ? strstr+0x22/0x60 ? dmi_matches+0x76/0xe0 snd_intel_dsp_driver_probe.cold+0xaf/0x163 [snd_intel_dspcfg] azx_probe+0x7a/0x970 [snd_hda_intel] local_pci_probe+0x42/0x80 ? _cond_resched+0x16/0x40 pci_device_probe+0xfd/0x1b0 really_probe+0x205/0x460 driver_probe_device+0xe1/0x150 device_driver_attach+0xa1/0xb0 __driver_attach+0x8a/0x150 ? device_driver_attach+0xb0/0xb0 ? device_driver_attach+0xb0/0xb0 bus_for_each_dev+0x78/0xc0 bus_add_driver+0x12b/0x1e0 driver_register+0x8b/0xe0 ? 0xffffffffc0f65000 do_one_initcall+0x44/0x1d0 ? do_init_module+0x23/0x250 ? kmem_cache_alloc_trace+0xf5/0x200 do_init_module+0x5c/0x250 __do_sys_finit_module+0xb1/0x110 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Marcin Ślusarz Reviewed-by: Pierre-Louis Bossart Reviewed-by: Rafael J. Wysocki CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210208120104.204761-1-marcin.slusarz@gmail.com Signed-off-by: Vinod Koul

soundwire: bus: clarify dev_err/dbg device references

2021-02-07T12:19:17+00:00

The SoundWire bus code confuses bus and Slave device levels for dev_err/dbg logs. That's not impacting functionality but the accuracy of kernel logs. We should only use bus->dev for bus-level operations and handling of Device0. For all other logs where the device number is not zero, we should use &slave->dev to provide more precisions to the user/integrator. Reported-by: Rander Wang Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210122070634.12825-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: bus: fix confusion on device used by pm_runtime

2021-02-07T12:19:16+00:00

Intel stress-tests routinely report IO timeouts and invalid power management transitions. Upon further analysis, we seem to be using the wrong devices in pm_runtime calls. Before reading and writing registers, we first need to make sure the Slave is fully resumed. The existing code attempts to do such that, however because of a confusion dating from 2017 and copy/paste, we end-up resuming the parent only instead of resuming the codec device. This can lead to accesses to the Slave registers while the bus is still being configured and the Slave not enumerated, and as a result IO errors occur. This is a classic problem, similar confusions happened for HDaudio between bus and codec device, leading to power management issues. Fix by using the relevant device for all uses of pm_runtime functions. Fixes: 60ee9be255712 ('soundwire: bus: add PM/no-PM versions of read/write functions') Fixes: aa79293517b39 ('soundwire: bus: fix io error when processing alert event') Fixes: 9d715fa005ebc ('soundwire: Add IO transfer') Reported-by: Bard Liao Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210122070634.12825-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: export sdw_write/read_no_pm functions

2021-02-07T12:19:11+00:00

sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO without touching PM. Fixes: 0231453bc08f ('soundwire: bus: add clock stop helpers') Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: bus: use no_pm IO routines for all interrupt handling

2021-02-06T10:24:53+00:00

There is no need to play with pm_runtime reference counts, if needed the codec drivers are already explicitly resumed. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210122070634.12825-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul