kernel/git/stable/linux.git/drivers/spi/spi_imx.c, branch master

spi: reorganize drivers

2011-06-06T07:16:30+00:00

Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely Acked-by: Wolfram Sang Acked-by: Linus Walleij

spi/imx: select master mode for all channels

2011-02-15T22:10:11+00:00

The hardware seems to have a race condition when the inactive channels are in slave mode. We support master mode only, so we can just switch all channels to master mode. Signed-off-by: Sascha Hauer [ukleinek: add more verbose comment about the race] Signed-off-by: Uwe Kleine-König Signed-off-by: Grant Likely

spi/imx: Add i.MX53 support

2011-01-13T05:50:54+00:00

1. Change the Kconfig to include i.MX53 2. add devtype entry for i.MX53 Signed-off-by: Yong Shen Acked-by: Sascha Hauer Acked-by: Uwe Kleine-König Signed-off-by: Grant Likely

spi/imx: correct the test on platform_get_irq() return value

2011-01-07T17:01:23+00:00

The test "if (spi_imx->irq <= 0)" is not testing the IRQ value, but the return value of platform_get_irq(). As platform_get_irq() can return an error (-ENXIO) or the IRQ value it found, the test should be "if (spi_imx->irq < 0)" [grant.likely: Note: In general, Linux irq number 0 should also mean no irq, but arm still allows devices to be assigned 0, and the imx platform uses 0 for one of the spi devices, so this patch is needed for the device to work] Signed-off-by: Richard Genoud Signed-off-by: Grant Likely

spi/imx: remove autodetection

2010-12-24T02:18:36+00:00

There are no machines in-tree that still use the driver name as device name. So save a few bytes and remove it. Signed-off-by: Uwe Kleine-König Acked-by: Jason Wang Signed-off-by: Grant Likely

spi/imx: Support different fifo sizes

2010-10-11T14:12:22+00:00

The i.MX51 ECSPI has a fifo size of 64 entries instead of 8 entries as found on the other cspi bus devices. Cc: Jason Wang Signed-off-by: David Jander Signed-off-by: Sascha Hauer Signed-off-by: Uwe Kleine-König Acked-by: Grant Likely Signed-off-by: Sascha Hauer

spi/imx: add support for imx51's eCSPI and CSPI

2010-10-01T07:32:13+00:00

i.MX51 comes with two eCSPI interfaces (that are quite different from what was known before---the tried and tested Freescale way) and a CSPI interface that is identical to the devices found on i.MX25 and i.MX35. This patch is a merge of two very similar patches (by Jason Wang and Sascha Hauer resp.) plus a (now hopefully correct) reimplementation of the clock calculation. Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer

spi/imx: save the spi chip select in config struct, not the gpio to use

2010-10-01T07:32:13+00:00

This prepares adding support for imx51's eCSPI. This IP has seperate control and config bits for all four supported chip selects, so the config routine needs to know which chip select is being used even if the chipselect is realized by a gpio. Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer

spi/imx: get rid of more ifs depending on the used cpu

2010-10-01T07:32:12+00:00

Nearly everything that is needed is provided by the version of the SPI IP. Now the only checks left using cpu_is_... are clk divider tuning on mx21/mx27 and autodetection (which will die soon). Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer

spi/imx: convert driver to use platform ids

2010-10-01T07:32:11+00:00

This has the advantage not to need to much cpu_is_... macros. Still more when imx51 support is added which has two different spi interfaces which would introduce additional checks on the device id. With this setup it's not possible for the compiler anymore to detect the unused functions, so four additional kconfig symbols are introduced to ifdef out the unneeded functions in the callback array and all these functions are marked with __maybe_unused to suppress the corresponding gcc warnings. Comparing the driver footprint with and without the patch for a mx27 kernel yields: add/remove: 2/0 grow/shrink: 2/0 up/down: 280/0 (280) function old new delta spi_imx_devtype - 192 +192 spi_imx_probe 980 1032 +52 spi_imx_devtype_data - 32 +32 spi_imx_setupxfer 276 280 +4 Later when the platform code is updated to use the platform ids, the autodetection can be removed which will make the driver a bit smaller again. (~60 Bytes in my test.) Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer