kernel/git/stable/linux.git/drivers/thermal/qcom, branch linux-6.2.y

thermal/drivers/tsens: limit num_sensors to 9 for msm8939

2023-03-10T08:28:07+00:00

[ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ] On msm8939 last (hwid=10) sensor was added in the hw revision 3.0. Calibration data for it was placed outside of the main calibration data blob, so it is not accessible by the current blob-parsing code. Moreover data for the sensor's p2 is not contiguous in the fuses. This makes it hard to use nvmem_cell API to parse calibration data in a generic way. Since the sensor doesn't seem to be actually used by the existing hardware, disable the sensor for now. Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Cc: Bryan O'Donoghue Cc: Shawn Guo Acked-by: Shawn Guo Signed-off-by: Dmitry Baryshkov Reviewed-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

thermal/drivers/tsens: fix slope values for msm8939

2023-03-10T08:28:07+00:00

[ Upstream commit 5aec3b035e0cbf3f042c2a03d654e5ad6748feb7 ] According to the vendor kernels (msm-3.10, 3.14 and 3.18), msm8939 uses non-standard slope values for calibrating the sensors. Fill them accordingly. Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Cc: Bryan O'Donoghue Cc: Shawn Guo Reviewed-by: Konrad Dybcio Acked-by: Shawn Guo Signed-off-by: Dmitry Baryshkov Reviewed-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20230101194034.831222-8-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

thermal/drivers/tsens: Sort out msm8976 vs msm8956 data

2023-03-10T08:28:07+00:00

[ Upstream commit a7d3006be5ca7b04e4b84b5ceaae55a700e511bd ] Tsens driver mentions that msm8976 data should be used for both msm8976 and msm8956 SoCs. This is not quite correct, as according to the vendor kernels, msm8976 should use standard slope values (3200), while msm8956 really uses the slope values found in the driver. Add separate compatibility string for msm8956, move slope value overrides to the corresponding init function and use the standard compute_intercept_slope() function for both platforms. Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Cc: AngeloGioacchino Del Regno Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20230101194034.831222-7-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

thermal/drivers/tsens: Drop msm8976-specific defines

2023-03-10T08:28:07+00:00

[ Upstream commit 3bf0ea99e2e32b0335106b86d84404cc85bcd113 ] Drop msm8976-specific defines, which duplicate generic ones. Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20230101194034.831222-6-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

thermal/drivers/qcom/lmh: Fix irq handler return value

2022-12-14T14:25:41+00:00

After enough invocations the LMh irq is eventually reported as bad, because the handler doesn't return IRQ_HANDLED, fix this. Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Reported-by: Daniel Lezcano Signed-off-by: Bjorn Andersson Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano

thermal/drivers/qcom: Demote error log of thermal zone register to debug

2022-12-14T14:25:40+00:00

devm_thermal_of_zone_register() can fail with -ENODEV if thermal zone for the channel is not represented in DT. This is perfectly fine since not all sensors needs to be used for thermal zones but only a few in real world. So demote the error log to debug to avoid spamming users. Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20221029052933.32421-1-manivannan.sadhasivam@linaro.org Signed-off-by: Daniel Lezcano

thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2

2022-12-14T14:25:40+00:00

On gen2 chips the stage2 threshold is not 140 degC but 125 degC. Make the warning message clearer by using this variable and also by including the temperature that was checked for. Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals") Signed-off-by: Luca Weiss Reviewed-by: Amit Kucheria Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com Signed-off-by: Daniel Lezcano

thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message

2022-12-14T14:25:40+00:00

Drivers should not be logging errors on probe deferral. Switch to using dev_err_probe() to log failures when parsing the devicetree to avoid errors like: qcom-spmi-adc-tm5 c440000.spmi:pmic@0:adc-tm@3400: get dt data failed: -517 when a channel is not yet available. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20221102152630.696-1-johan+linaro@kernel.org Signed-off-by: Daniel Lezcano

thermal/drivers/qcom/tsens: Rework debugfs file structure

2022-12-14T14:25:40+00:00

The current tsens debugfs structure is composed by: - a tsens dir in debugfs with a version file - a directory for each tsens istance with sensors file to dump all the sensors value. This works on the assumption that we have the same version for each istance but this assumption seems fragile and with more than one tsens istance results in the version file not tracking each of them. A better approach is to just create a subdirectory for each tsens istance and put there version and sensors debugfs file. Using this new implementation results in less code since debugfs entry are created only on successful tsens probe. Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano

thermal/drivers/qcom/tsens: Fix wrong version id dbg_version_show

2022-12-14T14:25:40+00:00

For VER_0 the version was incorrectly reported as 0.1.0. Fix that and correctly report the major version for this old tsens revision. Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano