kernel/git/stable/linux.git/drivers/thermal, branch linux-4.17.y

thermal: exynos: fix setting rising_threshold for Exynos5433

2018-08-03T05:47:55+00:00

[ Upstream commit 8bfc218d0ebbabcba8ed2b8ec1831e0cf1f71629 ] Add missing clearing of the previous value when setting rising temperature threshold. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

thermal: bcm2835: Stop using printk format %pCr

2018-07-03T09:26:48+00:00

commit bd2a07f71a1e2e198f8a30cb551d9defe422d83d upstream. Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by printing the variable that already holds the clock rate. Note that calling clk_get_rate() is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-3-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai To: Jonathan Corbet To: Michael Turquette To: Stephen Boyd To: Zhang Rui To: Eduardo Valentin To: Eric Anholt To: Stefan Wahren To: Greg Kroah-Hartman Cc: Sergey Senozhatsky Cc: Petr Mladek Cc: Linus Torvalds Cc: Steven Rostedt Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Geert Uytterhoeven Acked-by: Stefan Wahren Signed-off-by: Petr Mladek Signed-off-by: Greg Kroah-Hartman

Merge branch 'thermal-soc' into next

2018-05-11T01:37:21+00:00

thermal: exynos: Propagate error value from tmu_read()

2018-04-27T13:17:30+00:00

tmu_read() in case of Exynos4210 might return error for out of bound values. Current code ignores such value, what leads to reporting critical temperature value. Add proper error code propagation to exynos_get_temp() function. Signed-off-by: Marek Szyprowski CC: stable@vger.kernel.org # v4.6+ Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Eduardo Valentin

thermal: exynos: Reading temperature makes sense only when TMU is turned on

2018-04-27T13:17:30+00:00

When thermal sensor is not yet enabled, reading temperature might return random value. This might even result in stopping system booting when such temperature is higher than the critical value. Fix this by checking if TMU has been actually enabled before reading the temperature. This change fixes booting of Exynos4210-based board with TMU enabled (for example Samsung Trats board), which was broken since v4.4 kernel release. Signed-off-by: Marek Szyprowski Fixes: 9e4249b40340 ("thermal: exynos: Fix first temperature read after registering sensor") CC: stable@vger.kernel.org # v4.6+ Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Eduardo Valentin

thermal: int3403_thermal: Fix NULL pointer deref on module load / probe

2018-04-24T12:50:43+00:00

Starting with kernel 4.17 thermal_cooling_device_register() will call the get_max_state() op during register. Since we deref priv->priv in int3403_get_max_state() this means we must set priv->priv before calling thermal_cooling_device_register(). Signed-off-by: Hans de Goede Signed-off-by: Zhang Rui

Merge branches 'thermal-core' and 'thermal-soc' into next

2018-04-13T06:11:53+00:00

thermal: Add cooling device's statistics in sysfs

2018-04-02T13:49:01+00:00

This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar Signed-off-by: Zhang Rui

thermal: imx: Fix race condition in imx_thermal_probe()

2018-03-14T07:14:40+00:00

When device boots with T > T_trip_1 and requests interrupt, the race condition takes place. The interrupt comes before THERMAL_DEVICE_ENABLED is set. This leads to an attempt to reading sensor value from irq and disabling the sensor, based on the data->mode field, which expected to be THERMAL_DEVICE_ENABLED, but still stays as THERMAL_DEVICE_DISABLED. Afher this issue sensor is never re-enabled, as the driver state is wrong. Fix this problem by setting the 'data' members prior to requesting the interrupts. Fixes: 37713a1e8e4c ("thermal: imx: implement thermal alarm interrupt handling") Cc: Signed-off-by: Mikhail Lappo Signed-off-by: Fabio Estevam Reviewed-by: Philipp Zabel Acked-by: Dong Aisheng Signed-off-by: Zhang Rui

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2018-02-06T23:04:58+00:00

Pull thermal management updates from Zhang Rui: - fix a race condition issue in power allocator governor (Yi Zeng). - add support for AP806 and CP110 in armada thermal driver, together with several improvements (Baruch Siach, Miquel Raynal) - add support for r8z7743 in rcar thermal driver (Biju Das) - convert thermal core to use new hwmon API to avoid warning (Fabio Estevam) - small fixes and cleanups in thermal core and x86_pkg_thermal, int3400_thermal, hisi_thermal, mtk_thermal and imx_thermal drivers (Pravin Shedge, Geert Uytterhoeven, Alexey Khoroshilov, Brian Bian, Matthias Brugger, Nicolin Chen, Uwe Kleine-König) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: thermal_hwmon: Convert to hwmon_device_register_with_info() thermal/x86 pkg temp: Remove debugfs_create_u32() casts thermal: int3400_thermal: fix error handling in int3400_thermal_probe() thermal/drivers/hisi: Remove bogus const from function return type thermal: armada: Give meaningful names to the thermal zones thermal: armada: Wait sensors validity before exiting the init callback thermal: armada: Change sensors trim default value thermal: armada: Update Kconfig and module description thermal: armada: Add support for Armada CP110 thermal: armada: Add support for Armada AP806 thermal: armada: Use real status register name thermal: armada: Clarify control registers accesses thermal: armada: Simplify the check of the validity bit thermal: armada: Use msleep for long delays dt-bindings: thermal: Describe Armada AP806 and CP110 dt-bindings: thermal: rcar: Add device tree support for r8a7743 thermal: mtk: Cleanup unused defines thermal: imx: update to new formula according to NXP AN5215 thermal: imx: use consistent style to write temperatures thermal: imx: improve comments describing algorithm for temp calculation ...