kernel/git/stable/linux.git/drivers/tty/serial/samsung.h, branch master

tty: serial: samsung_tty: delete samsung.h

2019-12-12T11:11:13+00:00

There is no need for a .h file for a single .c file, so just move all of the content of samsung.h into samsung_tty.c Cc: Kukjin Kim Cc: Hyunki Koo Cc: HYUN-KI KOO Cc: Shinbeom Choi Cc: Jiri Slaby Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20191210143706.3928480-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

tty: serial: samsung.h: remove reset_port callback from struct s3c24xx_uart_info

2019-12-12T11:11:11+00:00

The callback was never set, nor called, so remove the pointer entirely from struct s3c24xx_uart_info. Cc: Kukjin Kim Cc: Hyunki Koo Cc: HYUN-KI KOO Cc: Shinbeom Choi Cc: Jiri Slaby Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20191210143706.3928480-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

tty: serial: samsung.h: fix up minor comment issues

2019-12-12T11:11:09+00:00

checkpatch found some minor issues with comments in samsung.h, so fix that up. Cc: Kukjin Kim Cc: Krzysztof Kozlowski Cc: Hyunki Koo Cc: HYUN-KI KOO Cc: Shinbeom Choi Cc: Jiri Slaby Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191210143706.3928480-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

tty: serial: Remove redundant license text

2017-11-08T12:08:12+00:00

Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Chris Metcalf Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Signed-off-by: Greg Kroah-Hartman

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Metcalf Cc: Jiri Kosina Cc: David Sterba Cc: James Hogan Cc: Rob Herring Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: "Uwe Kleine-König" Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

serial: samsung: Simplify DMA engine initialization code

2017-01-12T10:51:24+00:00

dma_request_slave_channel_compat() requires filter function and mask, which are not needed on device tree based platforms, so simplify the code by calling the more appropriate dma_request_chan() function. This additionally gives us proper error handling, because the new function returns error codes instead of NULL on failure. Signed-off-by: Marek Szyprowski Reviewed-by: Sylwester Nawrocki Signed-off-by: Greg Kroah-Hartman

serial: samsung: Register cpufreq notifier only on S3C24xx

2016-08-31T13:39:58+00:00

The Samsung serial driver registered for CPU frequency transitions to recalculate its clock when ARM clock frequency changes. This is needed only on S3C24xx platform so limit the ifdef to respective cpufreq driver. On S3C24xx the ratio ratio between frequencies of UART's parent clock (pclk) and ARM's parent clock (fclk) remains fixed. Therefore when ARM clock frequency goes down, the serial is also affected. Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

tty: serial: samsung: add byte-order aware bit functions

2016-06-25T21:04:12+00:00

This driver makes use of the __set_bit() and __clear_bit() functions. When running under big-endian, these functions don't convert the bit indexes when working with peripheral registers, leading to the incorrect bits being set and cleared when running big-endian. Add two new driver functions for setting and clearing bits that are byte-order aware. Signed-off-by: Matthew Leach Reviewed-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

tty: serial: samsung: fixup accessors for endian

2016-06-25T21:04:12+00:00

Fix the serial access code to deal with kernels built for big endian operation. Signed-off-by: Matthew Leach Acked-by: Ben Dooks Reviewed-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

serial: samsung: fix DMA mode enter condition for small FIFO sizes

2015-08-05T05:07:23+00:00

Due to some of serial ports can have FIFO size smaller than cache line size, and because of need to align DMA buffer address to cache line size, it's necessary to calculate minimum number of bytes for which we want to start DMA transaction to be at least cache line size. The simplest way to meet this requirement is to get maximum of cache line size and FIFO size. Cc: # v3.18+ Reported-by: Krzysztof Kozlowski Signed-off-by: Marek Szyprowski Signed-off-by: Robert Baldyga Signed-off-by: Greg Kroah-Hartman