kernel/git/stable/linux.git/drivers/ufs, branch linux-6.15.y

scsi: ufs: core: Use link recovery when h8 exit fails during runtime resume

2025-08-15T10:16:55+00:00

[ Upstream commit 35dabf4503b94a697bababe94678a8bc989c3223 ] If the h8 exit fails during runtime resume process, the runtime thread enters runtime suspend immediately and the error handler operates at the same time. It becomes stuck and cannot be recovered through the error handler. To fix this, use link recovery instead of the error handler. Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Signed-off-by: Seunghui Lee Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com Reviewed-by: Bean Huo Acked-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Fix spelling of a sysfs attribute name

2025-07-10T14:08:31+00:00

[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Fix clk scaling to be conditional in reset and restore

2025-07-06T09:04:20+00:00

commit 2e083cd802294693a5414e4557a183dd7e442e71 upstream. In ufshcd_host_reset_and_restore(), scale up clocks only when clock scaling is supported. Without this change CPU latency is voted for 0 (ufshcd_pm_qos_update) during resume unconditionally. Signed-off-by: anvithdosapati Link: https://lore.kernel.org/r/20250616085734.2133581-1-anvithdosapati@google.com Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear") Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: ufs: core: Don't perform UFS clkscaling during host async scan

2025-07-06T09:04:09+00:00

[ Upstream commit e97633492f5a3eca7b3ff03b4ef6f993017f7955 ] When preparing for UFS clock scaling, the UFS driver will quiesce all sdevs queues in the UFS SCSI host tagset list and then unquiesce them in ufshcd_clock_scaling_unprepare(). If the UFS SCSI host async scan is in progress at this time, some LUs may be added to the tagset list between UFS clkscale prepare and unprepare. This can cause two issues: 1. During clock scaling, there may be I/O requests issued through new added queues that have not been quiesced, leading to task abort issue. 2. These new added queues that have not been quiesced will be unquiesced as well when UFS clkscale is unprepared, resulting in warning prints. Therefore, use the mutex lock scan_mutex in ufshcd_clock_scaling_prepare() and ufshcd_clock_scaling_unprepare() to protect it. Co-developed-by: Can Guo Signed-off-by: Can Guo Signed-off-by: Ziqi Chen Link: https://lore.kernel.org/r/20250522081233.2358565-1-quic_ziqichen@quicinc.com Suggested-by: Bart Van Assche Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: ufs: Fix a hang in the error handler

2025-06-19T13:40:51+00:00

[ Upstream commit 8a3514d348de87a9d5e2ac00fbac4faae0b97996 ] ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because resuming involves submitting a SCSI command and ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has been called instead of before. Backtrace: __switch_to+0x174/0x338 __schedule+0x600/0x9e4 schedule+0x7c/0xe8 schedule_timeout+0xa4/0x1c8 io_schedule_timeout+0x48/0x70 wait_for_common_io+0xa8/0x160 //waiting on START_STOP wait_for_completion_io_timeout+0x10/0x20 blk_execute_rq+0xe4/0x1e4 scsi_execute_cmd+0x108/0x244 ufshcd_set_dev_pwr_mode+0xe8/0x250 __ufshcd_wl_resume+0x94/0x354 ufshcd_wl_runtime_resume+0x3c/0x174 scsi_runtime_resume+0x64/0xa4 rpm_resume+0x15c/0xa1c __pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing ufshcd_err_handler+0x1a0/0xd08 process_one_work+0x174/0x808 worker_thread+0x15c/0x490 kthread+0xf4/0x1ec ret_from_fork+0x10/0x20 Signed-off-by: Sanjeev Yadav [ bvanassche: rewrote patch description ] Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20250523201409.1676055-1-bvanassche@acm.org Reviewed-by: Peter Wang Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: qcom: Prevent calling phy_exit() before phy_init()

2025-06-19T13:40:47+00:00

[ Upstream commit 7831003165d37ecb7b33843fcee05cada0359a82 ] Prevent calling phy_exit() before phy_init() to avoid abnormal power count and the following warning during boot up. [5.146763] phy phy-1d80000.phy.0: phy_power_on was called before phy_init Fixes: 7bac65687510 ("scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()") Signed-off-by: Nitin Rawat Link: https://lore.kernel.org/r/20250526153821.7918-2-quic_nitirawa@quicinc.com Reviewed-by: Konrad Dybcio Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq

2025-06-19T13:40:47+00:00

[ Upstream commit 8c5bcb3daeef9bc54c9939c36dca9a626126eb59 ] On some platforms, the devfreq OPP freq may be different than the unipro core clock freq. Implement ufs_qcom_opp_freq_to_clk_freq() and use it to find the unipro core clk freq. Fixes: c02fe9e222d1 ("scsi: ufs: qcom: Implement the freq_to_gear_speed() vop") Signed-off-by: Can Guo Co-developed-by: Ziqi Chen Signed-off-by: Ziqi Chen Link: https://lore.kernel.org/r/20250522021537.999107-3-quic_ziqichen@quicinc.com Reported-by: Luca Weiss Closes: https://lore.kernel.org/linux-arm-msm/D9FZ9U3AEXW4.1I12FX3YQ3JPW@fairphone.com/ Tested-by: Luca Weiss Reviewed-by: Bean Huo Tested-by: Loïc Minier Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear()

2025-06-19T13:40:46+00:00

[ Upstream commit 663d0c19f3acc0d697f623d34b8eb3b438bf2bda ] The vop freq_to_gear() may return a gear greater than the negotiated max gear. Return the negotiated max gear if the mapped gear is greater. Fixes: c02fe9e222d1 ("scsi: ufs: qcom: Implement the freq_to_gear_speed() vop") Signed-off-by: Ziqi Chen Link: https://lore.kernel.org/r/20250522021537.999107-2-quic_ziqichen@quicinc.com Reported-by: Neil Armstrong Closes: https://lore.kernel.org/all/c7f2476a-943a-4d73-ad80-802c91e5f880@linaro.org/ Tested-by: Neil Armstrong Reviewed-by: Bean Huo Tested-by: Loïc Minier Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()

2025-06-19T13:39:55+00:00

[ Upstream commit 53755903b9357e69b2dd6a02fafbb1e30c741895 ] After UFS_ABORT_TASK has been processed successfully, the host will generate MCQ IRQ for ABORT TAG with response OCS_ABORTED. This results in ufshcd_compl_one_cqe() calling ufshcd_release_scsi_cmd(). But ufshcd_mcq_abort() already calls ufshcd_release_scsi_cmd(), resulting in __ufshcd_release() being called twice. This means hba->clk_gating.active_reqs will be decreased twice, making it go negative. Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort(). Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()") Signed-off-by: ping.gao Link: https://lore.kernel.org/r/20250516083812.3894396-1-ping.gao@samsung.com Reviewed-by: Peter Wang Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Remove redundant query_complete trace

2025-04-29T01:23:29+00:00

The query_complete trace was not removed after ufshcd_issue_dev_cmd() was called from the bsg path, resulting in duplicate output. Below is an example of the trace: ufs-utils-773 [000] ..... 218.176933: ufshcd_upiu: query_send: 0000:00:04.0: HDR:16 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ufs-utils-773 [000] ..... 218.177145: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00 ufs-utils-773 [000] ..... 218.177146: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00 Remove the redundant trace call in the bsg path, preventing duplication. Signed-off-by: Keoseong Park Link: https://lore.kernel.org/r/20250425010605epcms2p67e89b351398832fe0fd547404d3afc65@epcms2p6 Fixes: 71aabb747d5f ("scsi: ufs: core: Reuse exec_dev_cmd") Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen