kernel/git/stable/linux.git/drivers/uio/uio_pruss.c, branch master

uio: pruss: Remove this driver

2024-04-11T12:39:56+00:00

This UIO driver was used to control the PRU processors found on various TI SoCs. It was created before the Remoteproc framework, but now with that we have a standard way to program and manage the PRU processors. The proper PRU Remoteproc driver should be used instead of this driver. This driver only supported the original class of PRUSS (OMAP-L1xx / AM17xx / AM18xx / TMS320C674x / DA8xx) but when these platforms were switched to use Device Tree the support for DT was not added to this driver and so it is now unused/unusable. Support for these platforms can be added to the proper PRU Remoteproc driver if ever needed. Remove this driver. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20240410144803.126831-1-afd@ti.com Signed-off-by: Greg Kroah-Hartman

Fix build errors due to new UIO_MEM_DMA_COHERENT mess

2024-03-27T16:48:47+00:00

Commit 576882ef5e7f ("uio: introduce UIO_MEM_DMA_COHERENT type") introduced a new use-case for 'struct uio_mem' where the 'mem' field now contains a kernel virtual address when 'memtype' is set to UIO_MEM_DMA_COHERENT. That in turn causes build errors, because 'mem' is of type 'phys_addr_t', and a virtual address is a pointer type. When the code just blindly uses cast to mix the two, it caused problems when phys_addr_t isn't the same size as a pointer - notably on 32-bit architectures with PHYS_ADDR_T_64BIT. The proper thing to do would probably be to use a union member, and not have any casts, and make the 'mem' member be a union of 'mem.physaddr' and 'mem.vaddr', based on 'memtype'. This is not that proper thing. This is just fixing the ugly casts to be even uglier, but at least not cause build errors on 32-bit platforms with 64-bit physical addresses. Reported-by: Guenter Roeck Fixes: 576882ef5e7f ("uio: introduce UIO_MEM_DMA_COHERENT type") Fixes: 7722151e4651 ("uio_pruss: UIO_MEM_DMA_COHERENT conversion") Fixes: 019947805a8d ("uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion") Cc: Greg Kroah-Hartman Cc: Chris Leech Cc: Nilesh Javali Cc: Christoph Hellwig Signed-off-by: Linus Torvalds

uio_pruss: UIO_MEM_DMA_COHERENT conversion

2024-03-07T21:52:59+00:00

Conversion of this driver to use UIO_MEM_DMA_COHERENT for dma_alloc_coherent memory instead of UIO_MEM_PHYS. Signed-off-by: Chris Leech Link: https://lore.kernel.org/r/20240201233400.3394996-4-cleech@redhat.com Signed-off-by: Greg Kroah-Hartman

uio: pruss: fix missing iounmap() in pruss_probe()

2023-08-22T11:41:55+00:00

platform_get_irq() is called after ioremap(), if it fails, iounmap() needs be called in error the path. Fixes: 2fd84b9b839c ("uio: pruss: fix to check return value of platform_get_irq() in pruss_probe()") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20230808123827.560603-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman

uio: pruss: fix to check return value of platform_get_irq() in pruss_probe()

2023-08-04T14:21:04+00:00

The platform_get_irq might be failed and return a negative result. So there should have an error handling code. Fixed this by adding an error handling code. Signed-off-by: Zhang Shurong Link: https://lore.kernel.org/r/tencent_8E383752B54E5BF860711E500AD8A8971208@qq.com Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 2)

2022-06-10T12:51:35+00:00

Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

uio: pruss: use devm_clk_get() for clk init

2020-12-09T18:57:03+00:00

This change uses devm_clk_get() to obtain a reference to the clock. It has the benefit that clk_put() is no longer required, and cleans up the exit & error path. Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20201119145059.48326-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman

uio: pruss: move simple allocations to dem_ equivalents

2020-11-13T15:37:06+00:00

This change moves the simple allocations to their device-managed equivalents. This cleans up some error/exit paths. Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20201111112242.62116-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman

uio: pruss: fix error handling in probe

2018-08-02T08:14:26+00:00

There are two bugs here. First the error codes weren't set on several paths. And second, if the call to request_threaded_irq() inside uio_register_device() fails then it would lead to a double free when we call uio_unregister_device() inside pruss_cleanup(). Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

treewide: kzalloc() -> kcalloc()

2018-06-12T23:19:22+00:00

The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook