kernel/git/stable/linux.git/drivers/usb/chipidea, branch linux-6.15.y

usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume

2025-07-10T14:08:51+00:00

commit 31a6afbe86e8e9deba9ab53876ec49eafc7fd901 upstream. Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability. Reported-by: Shawn Guo Reported-by: John Ernberg Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/ Tested-by: John Ernberg # iMX8QXP Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller") Cc: stable Reviewed-by: Jun Li Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handling

2025-04-11T14:20:52+00:00

usb_phy_init() may return an error code if e.g. its implementation fails to prepare/enable some clocks. And properly rollback on probe error path by calling the counterpart usb_phy_shutdown(). Found by Linux Verification Center (linuxtesting.org). Fixes: be9cae2479f4 ("usb: chipidea: imx: Fix ULPI on imx53") Cc: stable Signed-off-by: Fedor Pchelkin Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250316102658.490340-4-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman

usb: chipidea: ci_hdrc_imx: fix call balance of regulator routines

2025-04-11T14:20:49+00:00

Upon encountering errors during the HSIC pinctrl handling section the regulator should be disabled. Use devm_add_action_or_reset() to let the regulator-disabling routine be handled by device resource management stack. Found by Linux Verification Center (linuxtesting.org). Fixes: 4d6141288c33 ("usb: chipidea: imx: pinctrl for HSIC is optional") Cc: stable Signed-off-by: Fedor Pchelkin Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250316102658.490340-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman

usb: chipidea: ci_hdrc_imx: fix usbmisc handling

2025-04-11T14:20:43+00:00

usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. Fixes: 74adad500346 ("usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()") Cc: stable Signed-off-by: Fedor Pchelkin Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250316102658.490340-2-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2025-04-03T01:23:31+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1. Included in here are: - Thunderbolt driver and core api updates for new hardware and features - usb-storage const array cleanups - typec driver updates - dwc3 driver updates - xhci driver updates and bugfixes - small USB documentation updates - usb cdns3 driver updates - usb gadget driver updates - other small driver updates and fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits) thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer thunderbolt: Scan retimers after device router has been enumerated usb: host: cdns3: forward lost power information to xhci usb: host: xhci-plat: allow upper layers to signal power loss usb: xhci: change xhci_resume() parameters to explicit the desired info usb: cdns3-ti: run HW init at resume() if HW was reset usb: cdns3-ti: move reg writes to separate function usb: cdns3: call cdns_power_is_lost() only once in cdns_resume() usb: cdns3: rename hibernated argument of role->resume() to lost_power usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime` usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func usb: dwc3: Don't use %pK through printk usb: core: Don't use %pK through printk usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running usb: xhci: Don't change the status of stalled TDs on failed Stop EP xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint xhci: Handle spurious events on Etron host isoc enpoints ...

usb: chipidea: imx: fix some typo

2025-03-03T09:23:56+00:00

bootlader -> bootloader set_wakeup failed -> hsic_set_clk failed Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250225062843.3930041-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

USB: chipidea: Switch to use hrtimer_setup()

2025-02-18T10:19:01+00:00

hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao Signed-off-by: Thomas Gleixner Acked-by: Zack Rusin Link: https://lore.kernel.org/all/a6e43ac5a90f975343e1cef2d8346b4697ec0473.1738746904.git.namcao@linutronix.de

USB: Use str_enable_disable-like helpers

2025-01-15T17:28:13+00:00

Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-6-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge 6.13-rc7 into usb-next

2025-01-13T05:11:06+00:00

We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman

usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()

2024-12-23T17:51:27+00:00

Current implementation of ci_hdrc_imx_driver does not decrement the refcount of the device obtained in usbmisc_get_init_data(). Add a put_device() call in .remove() and in .probe() before returning an error. This bug was found by an experimental static analysis tool that I am developing. Cc: stable Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs") Signed-off-by: Joe Hattori Acked-by: Peter Chen Link: https://lore.kernel.org/r/20241216015539.352579-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman