kernel/git/stable/linux.git/drivers/usb/gadget, branch linux-4.10.y

usb: gadget: legacy gadgets are optional

2017-05-20T12:30:56+00:00

commit 6e253d0fbc665b36192b8ed3cecdbb65b413a1eb upstream. With commit bc49d1d17dcf ("usb: gadget: don't couple configfs to legacy gadgets"),it is possible to build a modular kernel with both built-in configfs support and modular legacy gadget drivers. But when building a kernel without modules, it is also necessary to be able to build with configfs but without any legacy gadget driver. This was a possible configuration when the USB_CONFIGFS was a part of the choice options, but not anymore. Mark the choice for legacy gadget drivers as optional restores this. Fixes: bc49d1d17dcf ("usb: gadget: don't couple configfs to legacy gadgets") Signed-off-by: Romain Izard Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval

2017-03-30T07:44:04+00:00

commit 09424c50b7dff40cb30011c09114404a4656e023 upstream. The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Reviewed-by: Laurent Pinchart Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

ACM gadget: fix endianness in notifications

2017-03-30T07:44:04+00:00

commit cdd7928df0d2efaa3270d711963773a08a4cc8ab upstream. The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum Tested-by: 家瑋 Signed-off-by: Greg Kroah-Hartman

Revert "usb: gadget: uvc: Add missing call for additional setup data"

2017-03-18T11:18:41+00:00

commit eb38d913c27f32f4df173791051fecf6aca34173 upstream. This reverts commit 4fbac5206afd01b717d4bdc58793d471f3391b4b. This commit breaks g_webcam when used with uvc-gadget [1]. The user space application (e.g. uvc-gadget) is responsible for sending response to UVC class specific requests on control endpoint in uvc_send_response() in uvc_v4l2.c. The bad commit was causing a duplicate response to be sent with incorrect response data thus causing UVC probe to fail at the host and broken control transfer endpoint at the gadget. [1] - git://git.ideasonboard.org/uvc-gadget.git Acked-by: Laurent Pinchart Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: function: f_fs: pass companion descriptor along

2017-03-18T11:18:41+00:00

commit 2bfa0719ac2a9b2f3c91345873d3cdebd0296ba9 upstream. If we're dealing with SuperSpeed endpoints, we need to make sure to pass along the companion descriptor and initialize fields needed by the Gadget API. Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: dummy_hcd: clear usb_gadget region before registration

2017-03-18T11:18:40+00:00

commit 5bbc852676ae08e818241cf66a3ffe4be44225c4 upstream. When the user does device unbind and rebind test, the kernel will show below dump due to usb_gadget memory region is dirty after unbind. Clear usb_gadget region for every new probe. root@imx6qdlsolo:/sys/bus/platform/drivers/dummy_udc# echo dummy_udc.0 > bind [ 102.523312] kobject (eddd78b0): tried to init an initialized object, something is seriously wrong. [ 102.532447] CPU: 0 PID: 734 Comm: sh Not tainted 4.10.0-rc7-00872-g1b2b8e9 #1298 [ 102.539866] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 102.545717] Backtrace: [ 102.548225] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 102.555822] r7:ede34000 r6:60010013 r5:00000000 r4:c0f29418 [ 102.561512] [] (show_stack) from [] (dump_stack+0xb4/0xe8) [ 102.568764] [] (dump_stack) from [] (kobject_init+0x80/0x9c) [ 102.576187] r10:0000001f r9:eddd7000 r8:eeaf8c10 r7:eddd78a8 r6:c177891c r5:c0f3b060 [ 102.584036] r4:eddd78b0 r3:00000000 [ 102.587641] [] (kobject_init) from [] (device_initialize+0x28/0xf8) [ 102.595665] r5:eebc4800 r4:eddd78a8 [ 102.599268] [] (device_initialize) from [] (device_register+0x14/0x20) [ 102.607556] r7:eddd78a8 r6:00000000 r5:eebc4800 r4:eddd78a8 [ 102.613256] [] (device_register) from [] (usb_add_gadget_udc_release+0x8c/0x1ec) [ 102.622410] r5:eebc4800 r4:eddd7860 [ 102.626015] [] (usb_add_gadget_udc_release) from [] (usb_add_gadget_udc+0x14/0x18) [ 102.635351] r10:0000001f r9:eddd7000 r8:eddd788c r7:bf003770 r6:eddd77f8 r5:eddd7818 [ 102.643198] r4:eddd785c r3:eddd7b24 [ 102.646834] [] (usb_add_gadget_udc) from [] (dummy_udc_probe+0x170/0x1c4 [dummy_hcd]) [ 102.656458] [] (dummy_udc_probe [dummy_hcd]) from [] (platform_drv_probe+0x54/0xb8) [ 102.665881] r10:00000008 r9:c1778960 r8:bf004128 r7:fffffdfb r6:bf004128 r5:eeaf8c10 [ 102.673727] r4:eeaf8c10 [ 102.676293] [] (platform_drv_probe) from [] (driver_probe_device+0x264/0x474) [ 102.685186] r7:00000000 r6:00000000 r5:c1778960 r4:eeaf8c10 [ 102.690876] [] (driver_probe_device) from [] (bind_store+0xb8/0x14c) [ 102.698994] r10:eeb3bb4c r9:ede34000 r8:0000000c r7:eeaf8c44 r6:bf004128 r5:c0f3b668 [ 102.706840] r4:eeaf8c10 [ 102.709402] [] (bind_store) from [] (drv_attr_store+0x28/0x34) [ 102.716998] r9:ede34000 r8:00000000 r7:ee3863c0 r6:ee3863c0 r5:c0538c80 r4:c053970c [ 102.724776] [] (drv_attr_store) from [] (sysfs_kf_write+0x50/0x54) [ 102.732711] r5:c0538c80 r4:0000000c [ 102.736313] [] (sysfs_kf_write) from [] (kernfs_fop_write+0x100/0x214) [ 102.744599] r7:ee3863c0 r6:eeb3bb40 r5:00000000 r4:00000000 [ 102.750287] [] (kernfs_fop_write) from [] (__vfs_write+0x34/0x120) [ 102.758231] r10:00000000 r9:ede34000 r8:c0108bc4 r7:0000000c r6:ede35f80 r5:c029bd84 [ 102.766077] r4:ee223780 [ 102.768638] [] (__vfs_write) from [] (vfs_write+0xa8/0x170) [ 102.775974] r9:ede34000 r8:c0108bc4 r7:ede35f80 r6:01861cb0 r5:ee223780 r4:0000000c [ 102.783743] [] (vfs_write) from [] (SyS_write+0x4c/0xa8) [ 102.790818] r9:ede34000 r8:c0108bc4 r7:0000000c r6:01861cb0 r5:ee223780 r4:ee223780 [ 102.798595] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x1c) [ 102.806188] r7:00000004 r6:b6e83d58 r5:01861cb0 r4:0000000c Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Acked-by: Alan Stern Signed-off-by: Peter Chen Tested-by: Xiaolong Ye Reported-by: Fengguang Wu Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_hid: fix: Move IN request allocation to set_alt()

2017-03-12T05:44:17+00:00

commit 749494b6bdbbaf0899aa1c62a1ad74cd747bce47 upstream. Since commit: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()") we cannot allocate any requests in bind() as we check if we should align request buffer based on endpoint descriptor which is assigned in set_alt(). Allocating request in bind() function causes a NULL pointer dereference. This commit moves allocation of IN request from bind() to set_alt() to prevent this issue. Fixes: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()") Tested-by: David Lechner Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_hid: Use spinlock instead of mutex

2017-03-12T05:44:17+00:00

commit 33e4c1a9987a1fc3b42c3b534100b5b006d55c61 upstream. As IN request has to be allocated in set_alt() and released in disable() we cannot use mutex to protect it as we cannot sleep in those funcitons. Let's replace this mutex with a spinlock. Tested-by: David Lechner Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_hid: fix: Prevent accessing released memory

2017-03-12T05:44:16+00:00

commit aa65d11aa008f4de58a9cee7e121666d9d68505e upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by: David Lechner Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_hid: fix: Free out requests

2017-03-12T05:44:16+00:00

commit 20d2ca955bd09639c7b01db5761d157c297aea0a upstream. Requests for out endpoint are allocated in bind() function but never released. This commit ensures that all pending requests are released when we disable out endpoint. Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by: David Lechner Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman