kernel/git/stable/linux.git/drivers/usb/host/ohci-sh.c, branch master

USB: OHCI: remove OHCI SH platform driver

2012-10-22T18:26:55+00:00

All users have been converted to use the OHCI platform driver instead, thus making ohci-sh obsolete, so remove it. Signed-off-by: Florian Fainelli Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: ohci-sh.c: remove err() usage

2012-04-27T18:24:44+00:00

err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman

OHCI: remove uses of hcd->state

2011-11-18T18:51:00+00:00

This patch (as1500) removes all uses of the objectionable hcd->state variable from the ohci-hcd family of drivers. It is replaced by a private ohci->rh_state field, just as in uhci-hcd and ehci-hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: irq: Remove IRQF_DISABLED

2011-09-18T08:39:36+00:00

This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang Signed-off-by: Greg Kroah-Hartman

usb: update email address in ohci-sh and r8a66597-hcd

2011-07-08T21:57:12+00:00

Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

usb: ohci-sh: Set IRQ as shared.

2010-11-01T21:01:27+00:00

The SH USB interface has both OHCI and EHCI modes that share the same interrupt. Flag the OHCI IRQ as shared in preparation for EHCI support. Signed-off-by: Paul Mundt

USB: ohci-sh - use resource_size instead of defining its own resource_len macro

2010-10-22T17:22:15+00:00

Signed-off-by: Axel Lin Acked-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

USB: automatically enable RHSC interrupts

2008-08-21T17:26:38+00:00

This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

Revert "USB: don't explicitly reenable root-hub status interrupts"

2008-07-06T17:27:25+00:00

This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov Acked-by: Alan Stern Acked-by: David Brownell Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds

USB: don't explicitly reenable root-hub status interrupts

2008-04-25T04:16:53+00:00

This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman