kernel/git/stable/linux.git/drivers/usb/host, branch linux-5.19.y

usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()

2022-10-24T07:58:26+00:00

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: xhci-plat: suspend/resume clks for brcm

2022-10-24T07:58:24+00:00

[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ] The xhci_plat_brcm xhci block can enter suspend with clock disabled to save power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS quirk to do so. Reviewed-by: Florian Fainelli Signed-off-by: Justin Chen Link: https://lore.kernel.org/r/1660170455-15781-3-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: xhci-plat: suspend and resume clocks

2022-10-24T07:58:24+00:00

[ Upstream commit 8bd954c56197caf5e3a804d989094bc3fe6329aa ] Introduce XHCI_SUSPEND_RESUME_CLKS quirk as a means to suspend and resume clocks if the hardware is capable of doing so. We assume that clocks will be needed if the device may wake. Reviewed-by: Florian Fainelli Signed-off-by: Justin Chen Link: https://lore.kernel.org/r/1660170455-15781-2-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: Don't show warning for reinit on known broken suspend

2022-10-24T07:57:56+00:00

[ Upstream commit 484d6f7aa3283d082c87654b7fe7a7f725423dfb ] commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") introduced a new warning message when the host controller error was set and re-initializing. This is expected behavior on some designs which already set `xhci->broken_suspend` so the new warning is alarming to some users. Modify the code to only show the warning if this was a surprising behavior to the XHCI driver. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470 Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") Reported-by: Artem S. Tashkinov Signed-off-by: Mario Limonciello Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: dbc: Fix memory leak in xhci_alloc_dbc()

2022-10-24T07:56:41+00:00

commit d591b32e519603524a35b172156db71df9116902 upstream. If DbC is already in use, then the allocated memory for the xhci_dbc struct doesn't get freed before returning NULL, which leads to a memleak. Fixes: 534675942e90 ("xhci: dbc: refactor xhci_dbc_init()") Cc: stable@vger.kernel.org Signed-off-by: Rafael Mendonca Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix bandwidth release issue

2022-09-08T09:24:06+00:00

commit 6020f480004a80cdad4ae5ee180a231c4f65595b upstream. This happens when @udev->reset_resume is set to true, when usb resume, the flow as below: - hub_resume - usb_disable_interface - usb_disable_endpoint - usb_hcd_disable_endpoint - xhci_endpoint_disable // it set @ep->hcpriv to NULL Then when reset usb device, it will drop allocated endpoints, the flow as below: - usb_reset_and_verify_device - usb_hcd_alloc_bandwidth - xhci_mtk_drop_ep but @ep->hcpriv is already set to NULL, the bandwidth will be not released anymore. Due to the added endponts are stored in hash table, we can drop the check of @ep->hcpriv. Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: relax TT periodic bandwidth allocation

2022-09-08T09:24:06+00:00

commit 8b13ea05117ffad4727b0971ed09122d5c91c4dc upstream. Currently uses the worst case byte budgets on FS/LS bus bandwidth, for example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 5 uframes(188 * 5) while the actual FS bus budget should be just 192 bytes. It cause that many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured. To improve it, changes to use "approximate" best case budget for FS/LS bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Signed-off-by: Chunfeng Yun Cc: stable Link: https://lore.kernel.org/r/20220819080556.32215-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

xhci: Add grace period after xHC start to prevent premature runtime suspend.

2022-09-08T09:24:04+00:00

commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Revert "xhci: turn off port power in shutdown"

2022-09-08T09:23:58+00:00

[ Upstream commit 8531aa1659f7278d4f2ec7408cc000eaa8d85217 ] This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: Fix null pointer dereference in remove if xHC has only one roothub

2022-09-08T09:23:58+00:00

[ Upstream commit 4a593a62a9e3a25ab4bc37f612e4edec144f7f43 ] The remove path in xhci platform driver tries to remove and put both main and shared hcds even if only a main hcd exists (one roothub) This causes a null pointer dereference in reboot for those controllers. Check that the shared_hcd exists before trying to remove it. Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd") Reported-by: Alexey Sheplyakov Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220825150840.132216-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin