kernel/git/stable/linux.git/drivers/usb/musb, branch linux-3.10.y

usb: musb: Fix trying to free already-free IRQ 4

2017-06-07T22:46:52+00:00

commit 8c300fe282fa254ea730c92cb0983e2642dc1fff upstream. When unloading omap2430, we can get the following splat: WARNING: CPU: 1 PID: 295 at kernel/irq/manage.c:1478 __free_irq+0xa8/0x2c8 Trying to free already-free IRQ 4 ... [] (free_irq) from [] (musbhs_dma_controller_destroy+0x28/0xb0 [musb_hdrc]) [] (musbhs_dma_controller_destroy [musb_hdrc]) from [] (musb_remove+0xf0/0x12c [musb_hdrc]) [] (musb_remove [musb_hdrc]) from [] (platform_drv_remove+0x24/0x3c) ... This is because the irq number in use is 260 nowadays, and the dma controller is using u8 instead of int. Fixes: 6995eb68aab7 ("USB: musb: enable low level DMA operation for Blackfin") Signed-off-by: Tony Lindgren [b-liu@ti.com: added Fixes tag] Signed-off-by: Bin Liu Signed-off-by: Willy Tarreau

usb: musb: Ensure rx reinit occurs for shared_fifo endpoints

2016-08-21T21:22:35+00:00

commit f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 upstream. shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by: Andrew Goodbody Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Willy Tarreau

usb: musb: Stop bulk endpoint while queue is rotated

2016-08-21T21:22:35+00:00

commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c upstream. Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by: Andrew Goodbody Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Willy Tarreau

usb: musb: core: fix order of arguments to ulpi write callback

2015-12-09T18:40:10+00:00

commit 705e63d2b29c8bbf091119084544d353bda70393 upstream. There is a bit of a mess in the order of arguments to the ulpi write callback. There is int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) in drivers/usb/common/ulpi.c; struct usb_phy_io_ops { ... int (*write)(struct usb_phy *x, u32 val, u32 reg); } in include/linux/usb/phy.h. The callback registered by the musb driver has to comply to the latter, but up to now had "offset" first which effectively made the function broken for correct users. So flip the order and while at it also switch to the parameter names of struct usb_phy_io_ops's write. Fixes: ffb865b1e460 ("usb: musb: add ulpi access operations") Signed-off-by: Uwe Kleine-König Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: musb: avoid NULL pointer dereference

2014-05-06T14:55:33+00:00

commit eee3f15d5f1f4f0c283dd4db67dc1b874a2852d1 upstream. instead of relying on the otg pointer, which can be NULL in certain cases, we can use the gadget and host pointers we already hold inside struct musb. Tested-by: Tony Lindgren Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: musb: make use_sg flag URB specific

2013-05-28T19:17:21+00:00

Since highmem PIO URB handling was introduced in: 8e8a551 usb: musb: host: Handle highmem in PIO mode when a URB is being handled it may happen that the static use_sg flag was set by a previous URB with buffer in highmem. This leads to error in handling the present URB. Fix this by making the use_sg flag URB specific. Cc: stable # 3.7+ Acked-by: Linus Walleij Signed-off-by: Virupax Sadashivpetimath Signed-off-by: Fabio Baltieri Signed-off-by: Felipe Balbi

usb: musb: dsps: fix error return code in dsps_create_musb_pdev()

2013-05-15T14:24:17+00:00

Fix to return -ENOMEM in the devm_kzalloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi

usb: musb: omap2430: add missing platform_device_put() on error in omap2430_probe()

2013-05-15T14:19:12+00:00

Add the missing platform_device_put() before return from omap2430_probe() in the error handling case. Introduced by commit ca784be36cc725bca9b526eba342de7550329731 (usb: start using the control module driver) Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi

USB: regroup all depends on USB within an if USB block

2013-04-09T23:49:07+00:00

This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2013-04-05T22:18:00+00:00

Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by: Felipe Balbi