kernel/git/stable/linux.git/drivers/usb/phy/phy-isp1301-omap.c, branch master

usb: phy: remove phy-isp1301-omap driver

2023-01-12T09:53:11+00:00

With the H2 and H3 board support removed from the driver, there are actually no other users, so the entire driver can go away. Link: https://lore.kernel.org/linux-arm-kernel/20221019173437.GB41568@darkstar.musicnaut.iki.fi/ Suggested-by: Aaro Koskinen Signed-off-by: Arnd Bergmann

ARM: omap1: remove dead code

2023-01-12T09:53:11+00:00

After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen Cc: Janusz Krzysztofik Cc: linux-omap@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Acked-by: Tony Lindgren Acked-by: Kevin Hilman Signed-off-by: Arnd Bergmann

usb: isp1301-omap: Convert to i2c's .probe_new()

2022-11-22T16:33:27+00:00

The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20221118224540.619276-576-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

usb: omap: avoid mach/*.h headers

2022-04-21T13:01:32+00:00

The omap usb drivers still rely on mach/*.h headers that are explicitly or implicitly included, but all the required definitions are now in include/linux/soc/ti/, so use those instead and allow compile-testing on other architectures. Acked-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: omap1: move mach/usb.h to include/linux/soc

2022-04-21T13:00:59+00:00

The register definitions in this header are used in at least four different places, with little hope of completely cleaning that up. Split up the file into a portion that becomes a linux-wide header under include/linux/soc/ti/, and the parts that are actually only needed by board files. Acked-by: Felipe Balbi Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

usb: isp1301-omap: Fix the GPIO include

2021-07-21T08:06:30+00:00

The file is using only GPIO descriptors, so only include instead of the legacy include. This is a non-urgent fix. Fixes: f3ef38160e3d ("usb: isp1301-omap: Convert to use GPIO descriptors") Cc: Tony Lindgren Cc: Felipe Balbi Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210720200336.223398-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

usb: phy: Use fallthrough pseudo-keyword

2021-05-10T09:16:11+00:00

Replace /* FALLTHROUGH */ comment with pseudo-keyword macro fallthrough[1] [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Acked-by: Felipe Balbi Signed-off-by: Wei Ming Chen Link: https://lore.kernel.org/r/20210505141936.4343-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: convert comma to semicolon

2020-12-11T15:51:20+00:00

Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun Link: https://lore.kernel.org/r/20201211085428.2871-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman

usb: isp1301-omap: Convert to use GPIO descriptors

2020-11-26T08:15:31+00:00

This modernized the ISP1301 a bit by switching it to provide a GPIO descriptor from the H2 board if used. Cc: Tony Lindgren Cc: Felipe Balbi Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20201123102346.48284-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman