kernel/git/stable/linux.git/drivers/video/exynos, branch linux-3.5.y

video: exynos_dp: reduce delay time when configuring video setting

2012-05-29T13:16:15+00:00

This patch reduces delay time when configuring video setting, which is helpful to reduce wakeup time during resume. Signed-off-by: Jingoo Han Signed-off-by: Florian Tobias Schandinat

video: exynos_dp: move sw reset prioir to enabling sw defined function

2012-05-29T13:16:15+00:00

The sw reset should be called prioir to enabling sw defined function, according to datasheet. Signed-off-by: Jingoo Han Signed-off-by: Florian Tobias Schandinat

video: exynos_dp: use devm_ functions

2012-05-29T13:16:15+00:00

The devm_ functions allocate memory that is released when a driver detaches. This makes the code smaller and a bit simpler. Signed-off-by: Jingoo Han Signed-off-by: Florian Tobias Schandinat

video: exynos mipi dsi: support reverse panel type

2012-05-13T13:08:23+00:00

This patch adds panel_reverse variable to support reversed s6e8ax0 panel type. Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Florian Tobias Schandinat

video: exynos mipi dsi: Properly interpret the interrupt source flags

2012-05-13T13:08:23+00:00

Rework the interrupt handler so the RX_DONE, FIFO_EMPTY interrupts are properly detected. This prevents missing the interrupts when there are other bits set in the INTSRC register than just RX_DONE and FIFO_EMPTY. Signed-off-by: Sylwester Nawrocki Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Florian Tobias Schandinat

video: exynos mipi dsi: Avoid races in probe()

2012-05-13T13:08:22+00:00

Make sure all resources are initialized before interrupt handler is registered. Pass full platform device name to request_irq() so it can be distinguished which device has requested an interrupt in cases there are multiple instances in the system. Also enable voltage regulators regardless of they have been enabled by bootloader or not, to make sure other drivers using same regulators don't disable them unexpectedly. Signed-off-by: Sylwester Nawrocki Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Florian Tobias Schandinat

video: exynos mipi dsi: Do not use deprecated suspend/resume callbacks

2012-05-13T13:08:22+00:00

Use proper PM ops from struct dev_pm_ops rather than the deprecated ones. Signed-off-by: Sylwester Nawrocki Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Florian Tobias Schandinat

video: EXYNOS: changes mipi dsi regulator name from vdd10 to vdd11

2012-05-13T13:06:50+00:00

MIPI DSI uses 1.1v regulator, so change its supply name. Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Florian Tobias Schandinat

video: exynos_dp: remove unnecessary header includes

2012-05-13T13:05:52+00:00

Remove unnecessary headers from the file. Signed-off-by: Jingoo Han Signed-off-by: Florian Tobias Schandinat

video: EXYNOS: enable interrupt again after sw reset

2012-05-08T17:01:00+00:00

When exynos_mipi_update_cfg() is called, mipi dsi registers were become sw reset. So, It needs to enable interrupt again. Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Florian Tobias Schandinat