kernel/git/stable/linux.git/drivers/w1/masters, branch linux-3.18.y

USB: w1 ds2490: Fix bug caused by improper use of altsetting array

2019-05-16T07:17:17+00:00

commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream. The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings. The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+d65f673b847a1a96cdba@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman

w1: omap-hdq: fix missing bus unregister at removal

2018-11-22T06:32:44+00:00

commit a007734618fee1bf35556c04fa498d41d42c7301 upstream. The bus master was not removed after unloading the module or unbinding the driver. That lead to oopses like this [ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c [ 127.850646] pgd = 70e3cd9a [ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000 [ 127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq] [ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12 [ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 127.890441] PC is at 0xbf01d04c [ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc [ 127.898956] pc : [] lr : [] psr: a0070013 [ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c [ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040 [ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c [ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10 [ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051 [ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f) [ 127.951171] Stack: (0xcf885f48 to 0xcf886000) [ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00 [ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000 [ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000 [ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 128.007781] [] (w1_search_process_cb) from [] (w1_process+0x6c/0x118) [ 128.016479] [] (w1_process) from [] (kthread+0x130/0x148) [ 128.024047] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8) [ 128.037017] 5fa0: 00000000 00000000 00000000 00000000 [ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 128.061340] Code: bad PC value [ 128.064697] ---[ end trace af066e33c0e14119 ]--- Cc: Signed-off-by: Andreas Kemnade Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Enable clock before calling clk_get_rate() on it

2018-07-03T09:18:44+00:00

commit 955bc61328dc0a297fb3baccd84e9d3aee501ed8 upstream. According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by: Stefan Potyra Acked-by: Evgeniy Polyakov Cc: stable Signed-off-by: Greg Kroah-Hartman

w1/masters: use pr_* instead of printk

2014-06-20T00:46:51+00:00

This patch replaces all calls to the "printk" function within the "masters" subdirectory by calls to the appropriate "pr_*" function thus addressing the following warning generated by the checkpatch script: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Fjodor Schelichow Signed-off-by: Roman Sommer Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit()

2014-06-20T00:43:34+00:00

According to the i.MX reference manual, the read/write bit operations takes from 60 us to 120 us. This patch optimizes mxc_w1_ds2_touch_bit() function to use proper value for such delay. Nevertheless, a small margin for the timeout has been added for the case if clock frequency is inaccurate. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Perform a software reset at startup

2014-06-20T00:43:34+00:00

This patch adds a software reset for 1-Wire module at driver startup. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Optimize mxc_w1_ds2_reset_bus()

2014-06-20T00:43:34+00:00

According to the i.MX reference manual, the reset procedure and "presence" pulse takes 511 and 512 us, respectively. Measurement for i.MX27 is about 1100 us. There is no need to wait Reset+Presence more than this time. This patch optimizes mxc_w1_ds2_reset_bus() function to use proper value for delay after w1 bus reset. Nevertheless, a small margin for the timeout has been added for the case if clock frequency is inaccurate. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Fix incorrect "presence" status

2014-06-20T00:43:34+00:00

W1 reset_bus() should return zero if slave device is present. This patch fix this issue. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Enable driver compilation with COMPILE_TEST

2014-02-28T23:27:09+00:00

This helps increasing build testing coverage. To do this, __raw_{read,write}b() functions was be replaced with simple {read,write}b() variants. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Driver cleanup

2014-02-28T23:27:09+00:00

- Remove old and currently wrong address of the FSF from license parts of the code. - Remove unused #include and sort remaining headers alphabetically. - Remove unised definitions. - Add definitions for bit-fields. - Add missing module owner field. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman