kernel/git/stable/linux.git/fs/block_dev.c, branch linux-4.10.y

fs/block_dev: always invalidate cleancache in invalidate_bdev()

2017-05-20T12:31:01+00:00

commit a5f6a6a9c72eac38a7fadd1a038532bc8516337c upstream. invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0 which doen't make any sense. Make sure that invalidate_bdev() always calls cleancache_invalidate_inode() regardless of mapping->nrpages value. Fixes: c515e1fd361c ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin Reviewed-by: Jan Kara Acked-by: Konrad Rzeszutek Wilk Cc: Alexander Viro Cc: Ross Zwisler Cc: Jens Axboe Cc: Johannes Weiner Cc: Alexey Kuznetsov Cc: Christoph Hellwig Cc: Nikolay Borisov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

block: get rid of blk_integrity_revalidate()

2017-05-14T12:08:30+00:00

commit 19b7ccf8651df09d274671b53039c672a52ad84d upstream. Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" Cc: Christoph Hellwig Cc: Mike Snitzer Tested-by: Dan Williams Signed-off-by: Ilya Dryomov [idryomov@gmail.com: backport to < 4.11: bdi is embedded in queue] Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block: fix use after free in __blkdev_direct_IO

2017-01-24T14:55:53+00:00

We can't dereference the dio structure after submitting the last bio for this request, as I/O completion might have happened before the code is run. Introduce a local is_sync variable instead. Fixes: 542ff7bf ("block: new direct I/O implementation") Signed-off-by: Christoph Hellwig Reported-by: Matias Bjørling Tested-by: Matias Bjørling Signed-off-by: Jens Axboe

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

2017-01-04T17:03:37+00:00

Pull block layer fixes from Jens Axboe: "A set of fixes for the current series, one fixing a regression with block size < page cache size in the alias series from Jan. Outside of that, two small cleanups for wbt from Bart, a nvme pull request from Christoph, and a few small fixes of documentation updates" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix up io_poll documentation block: Avoid that sparse complains about context imbalance in __wbt_wait() block: Make wbt_wait() definition consistent with declaration clean_bdev_aliases: Prevent cleaning blocks that are not in block range genhd: remove dead and duplicated scsi code block: add back plugging in __blkdev_direct_IO nvmet/fcloop: remove some logically dead code performing redundant ret checks nvmet: fix KATO offset in Set Features nvme/fc: simplify error handling of nvme_fc_create_hw_io_queues nvme/fc: correct some printk information nvme/scsi: Remove START STOP emulation nvme/pci: Delete misleading queue-wrap comment nvme/pci: Fix whitespace problem nvme: simplify stripe quirk nvme: update maintainers information

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

block: add back plugging in __blkdev_direct_IO

2016-12-22T18:48:20+00:00

This allows sending larger than 1 MB requests to devices that support large I/O sizes. Signed-off-by: Christoph Hellwig Reported-by: Laurence Oberman Signed-off-by: Jens Axboe

block_dev: don't update file access position for sync direct IO

2016-12-14T04:07:08+00:00

For sync direct IO, generic_file_direct_write/generic_file_read_iter will update file access position. Don't duplicate the update in .direct_IO. This cause my raid array can't assemble. Cc: Christoph Hellwig Cc: Jens Axboe Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe

block_dev: don't test bdev->bd_contains when it is not stable

2016-12-14T04:07:08+00:00

bdev->bd_contains is not stable before calling __blkdev_get(). When __blkdev_get() is called on a parition with ->bd_openers == 0 it sets bdev->bd_contains = bdev; which is not correct for a partition. After a call to __blkdev_get() succeeds, ->bd_openers will be > 0 and then ->bd_contains is stable. When FMODE_EXCL is used, blkdev_get() calls bd_start_claiming() -> bd_prepare_to_claim() -> bd_may_claim() This call happens before __blkdev_get() is called, so ->bd_contains is not stable. So bd_may_claim() cannot safely use ->bd_contains. It currently tries to use it, and this can lead to a BUG_ON(). This happens when a whole device is already open with a bd_holder (in use by dm in my particular example) and two threads race to open a partition of that device for the first time, one opening with O_EXCL and one without. The thread that doesn't use O_EXCL gets through blkdev_get() to __blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev; Immediately thereafter the other thread, using FMODE_EXCL, calls bd_start_claiming() from blkdev_get(). This should fail because the whole device has a holder, but because bdev->bd_contains == bdev bd_may_claim() incorrectly reports success. This thread continues and blocks on bd_mutex. The first thread then sets bdev->bd_contains correctly and drops the mutex. The thread using FMODE_EXCL then continues and when it calls bd_may_claim() again in: BUG_ON(!bd_may_claim(bdev, whole, holder)); The BUG_ON fires. Fix this by removing the dependency on ->bd_contains in bd_may_claim(). As bd_may_claim() has direct access to the whole device, it can simply test if the target bdev is the whole device. Fixes: 6b4517a7913a ("block: implement bd_claiming and claiming block") Cc: stable@vger.kernel.org (v2.6.35+) Signed-off-by: NeilBrown Signed-off-by: Jens Axboe

block: protect iterate_bdevs() against concurrent close

2016-12-01T15:26:39+00:00

If a block device is closed while iterate_bdevs() is handling it, the following NULL pointer dereference occurs because bdev->b_disk is NULL in bdev_get_queue(), which is called from blk_get_backing_dev_info() (in turn called by the mapping_cap_writeback_dirty() call in __filemap_fdatawrite_range()): BUG: unable to handle kernel NULL pointer dereference at 0000000000000508 IP: [] blk_get_backing_dev_info+0x10/0x20 PGD 9e62067 PUD 9ee8067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 1 PID: 2422 Comm: sync Not tainted 4.5.0-rc7+ #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) task: ffff880009f4d700 ti: ffff880009f5c000 task.ti: ffff880009f5c000 RIP: 0010:[] [] blk_get_backing_dev_info+0x10/0x20 RSP: 0018:ffff880009f5fe68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88000ec17a38 RCX: ffffffff81a4e940 RDX: 7fffffffffffffff RSI: 0000000000000000 RDI: ffff88000ec176c0 RBP: ffff880009f5fe68 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88000ec17860 R13: ffffffff811b25c0 R14: ffff88000ec178e0 R15: ffff88000ec17a38 FS: 00007faee505d700(0000) GS:ffff88000fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000508 CR3: 0000000009e8a000 CR4: 00000000000006e0 Stack: ffff880009f5feb8 ffffffff8112e7f5 0000000000000000 7fffffffffffffff 0000000000000000 0000000000000000 7fffffffffffffff 0000000000000001 ffff88000ec178e0 ffff88000ec17860 ffff880009f5fec8 ffffffff8112e81f Call Trace: [] __filemap_fdatawrite_range+0x85/0x90 [] filemap_fdatawrite+0x1f/0x30 [] fdatawrite_one_bdev+0x16/0x20 [] iterate_bdevs+0xf2/0x130 [] sys_sync+0x63/0x90 [] entry_SYSCALL_64_fastpath+0x12/0x76 Code: 0f 1f 44 00 00 48 8b 87 f0 00 00 00 55 48 89 e5 <48> 8b 80 08 05 00 00 5d RIP [] blk_get_backing_dev_info+0x10/0x20 RSP CR2: 0000000000000508 ---[ end trace 2487336ceb3de62d ]--- The crash is easily reproducible by running the following command, if an msleep(100) is inserted before the call to func() in iterate_devs(): while :; do head -c1 /dev/nullb0; done > /dev/null & while :; do sync; done Fix it by holding the bd_mutex across the func() call and only calling func() if the bdev is opened. Cc: stable@vger.kernel.org Fixes: 5c0d6b60a0ba ("vfs: Create function for iterating over block devices") Reported-and-tested-by: Wei Fang Signed-off-by: Rabin Vincent Signed-off-by: Jan Kara Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe

block: bio: pass bvec table to bio_init()

2016-11-22T15:57:21+00:00

Some drivers often use external bvec table, so introduce this helper for this case. It is always safe to access the bio->bi_io_vec in this way for this case. After converting to this usage, it will becomes a bit easier to evaluate the remaining direct access to bio->bi_io_vec, so it can help to prepare for the following multipage bvec support. Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Fixed up the new O_DIRECT cases. Signed-off-by: Jens Axboe