kernel/git/stable/linux.git/fs/cifs/cifsfs.c, branch master

smb: move client and server files to common directory fs/smb

2023-05-24T21:29:21+00:00

Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko and helper modules) to new fs/smb subdirectory: fs/cifs --> fs/smb/client fs/ksmbd --> fs/smb/server fs/smbfs_common --> fs/smb/common Suggested-by: Linus Torvalds Acked-by: Namjae Jeon Signed-off-by: Steve French

cifs: release leases for deferred close handles when freezing

2023-05-10T22:48:30+00:00

We should not be caching closed files when freeze is invoked on an fs (so we can release resources more gracefully). Fixes xfstests generic/068 generic/390 generic/491 Reviewed-by: David Howells Cc: Signed-off-by: Steve French

SMB3: force unmount was failing to close deferred close files

2023-05-09T14:53:59+00:00

In investigating a failure with xfstest generic/392 it was noticed that mounts were reusing a superblock that should already have been freed. This turned out to be related to deferred close files keeping a reference count until the closetimeo expired. Currently the only way an fs knows that mount is beginning is when force unmount is called, but when this, ie umount_begin(), is called all deferred close files on the share (tree connection) should be closed immediately (unless shared by another mount) to avoid using excess resources on the server and to avoid reusing a superblock which should already be freed. In umount_begin, close all deferred close handles for that share if this is the last mount using that share on this client (ie send the SMB3 close request over the wire for those that have been already closed by the app but that we have kept a handle lease open for and have not sent closes to the server for yet). Reported-by: David Howells Acked-by: Bharath SM Cc: Fixes: 78c09634f7dc ("Cifs: Fix kernel oops caused by deferred close for files.") Signed-off-by: Steve French

smb3: improve parallel reads of large files

2023-05-09T05:59:48+00:00

rasize (ra_pages) should be set higher than read size by default to allow parallel reads when reading large files in order to improve performance (otherwise there is much dead time on the network when doing readahead of large files). Default rasize to twice readsize. Signed-off-by: Steve French

cifs: print smb3_fs_context::source when mounting

2023-05-02T14:23:51+00:00

Print full device name (UNC + optional prefix) from @old_ctx->source when printing info about mount. Before patch mount.cifs //srv/share/dir /mnt -o ... dmesg ... CIFS: Attempting to mount \\srv\share After patch mount.cifs //srv/share/dir /mnt -o ... dmesg ... CIFS: Attempting to mount //srv/share/dir Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French

smb3: fix unusable share after force unmount failure

2023-03-24T19:37:12+00:00

If user does forced unmount ("umount -f") while files are still open on the share (as was seen in a Kubernetes example running on SMB3.1.1 mount) then we were marking the share as "TID_EXITING" in umount_begin() which caused all subsequent operations (except write) to fail ... but unfortunately when umount_begin() is called we do not know yet that there are open files or active references on the share that would prevent unmount from succeeding. Kubernetes had example when they were doing umount -f when files were open which caused the share to become unusable until the files were closed (and the umount retried). Fix this so that TID_EXITING is not set until we are about to send the tree disconnect (not at the beginning of forced umounts in umount_begin) so that if "umount -f" fails (due to open files or references) the mount is still usable. Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French

Merge tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

2023-02-23T01:12:44+00:00

Pull cifs client updates from Steve French: "The largest subset of this is from David Howells et al: making the cifs/smb3 driver pass iov_iters down to the lowest layers, directly to the network transport rather than passing lists of pages around, helping multiple areas: - Pin user pages, thereby fixing the race between concurrent DIO read and fork, where the pages containing the DIO read buffer may end up belonging to the child process and not the parent - with the result that the parent might not see the retrieved data. - cifs shouldn't take refs on pages extracted from non-user-backed iterators (eg. KVEC). With these changes, cifs will apply the appropriate cleanup. - Making it easier to transition to using folios in cifs rather than pages by dealing with them through BVEC and XARRAY iterators. - Allowing cifs to use the new splice function The remainder are: - fixes for stable, including various fixes for uninitialized memory, wrong length field causing mount issue to very old servers, important directory lease fixes and reconnect fixes - cleanups (unused code removal, change one element array usage, and a change form strtobool to kstrtobool, and Kconfig cleanups) - SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes - reconnect fixes - multichannel fixes, including improving channel allocation (to least used channel) - remove the last use of lock_page_killable by moving to folio_lock_killable" * tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits) update internal module version number for cifs.ko cifs: update ip_addr for ses only for primary chan setup cifs: use tcon allocation functions even for dummy tcon cifs: use the least loaded channel for sending requests cifs: DIO to/from KVEC-type iterators should now work cifs: Remove unused code cifs: Build the RDMA SGE list directly from an iterator cifs: Change the I/O paths to use an iterator rather than a page list cifs: Add a function to read into an iter from a socket cifs: Add some helper functions cifs: Add a function to Hash the contents of an iterator cifs: Add a function to build an RDMA SGE list from an iterator netfs: Add a function to extract an iterator into a scatterlist netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE splice: Export filemap/direct_splice_read() iov_iter: Add a function to extract a page list from an iterator iov_iter: Define flags to qualify page extraction. splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE splice: Add a func to do a splice from a buffered file without ITER_PIPE ...

cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE

2023-02-20T23:25:43+00:00

Provide cifs_splice_read() to use a bvec rather than an pipe iterator as the latter cannot so easily be split and advanced, which is necessary to pass an iterator down to the bottom levels. Upstream cifs gets around this problem by using iov_iter_get_pages() to prefill the pipe and then passing the list of pages down. This is done by: (1) Bulk-allocate a bunch of pages to carry as much of the requested amount of data as possible, but without overrunning the available slots in the pipe and add them to an ITER_BVEC. (2) Synchronously call ->read_iter() to read into the buffer. (3) Discard any unused pages. (4) Load the remaining pages into the pipe in order and advance the head pointer. Signed-off-by: David Howells cc: Steve French cc: Shyam Prasad N cc: Rohith Surabattula cc: Jeff Layton cc: Al Viro cc: linux-cifs@vger.kernel.org Link: https://lore.kernel.org/r/166732028113.3186319.1793644937097301358.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French

Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

2023-02-20T19:53:11+00:00

Pull vfs idmapping updates from Christian Brauner: - Last cycle we introduced the dedicated struct mnt_idmap type for mount idmapping and the required infrastucture in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). As promised in last cycle's pull request message this converts everything to rely on struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevant on the mount level. Especially for non-vfs developers without detailed knowledge in this area this was a potential source for bugs. This finishes the conversion. Instead of passing the plain namespace around this updates all places that currently take a pointer to a mnt_userns with a pointer to struct mnt_idmap. Now that the conversion is done all helpers down to the really low-level helpers only accept a struct mnt_idmap argument instead of two namespace arguments. Conflating mount and other idmappings will now cause the compiler to complain loudly thus eliminating the possibility of any bugs. This makes it impossible for filesystem developers to mix up mount and filesystem idmappings as they are two distinct types and require distinct helpers that cannot be used interchangeably. Everything associated with struct mnt_idmap is moved into a single separate file. With that change no code can poke around in struct mnt_idmap. It can only be interacted with through dedicated helpers. That means all filesystems are and all of the vfs is completely oblivious to the actual implementation of idmappings. We are now also able to extend struct mnt_idmap as we see fit. For example, we can decouple it completely from namespaces for users that don't require or don't want to use them at all. We can also extend the concept of idmappings so we can cover filesystem specific requirements. In combination with the vfs{g,u}id_t work we finished in v6.2 this makes this feature substantially more robust and thus difficult to implement wrong by a given filesystem and also protects the vfs. - Enable idmapped mounts for tmpfs and fulfill a longstanding request. A long-standing request from users had been to make it possible to create idmapped mounts for tmpfs. For example, to share the host's tmpfs mount between multiple sandboxes. This is a prerequisite for some advanced Kubernetes cases. Systemd also has a range of use-cases to increase service isolation. And there are more users of this. However, with all of the other work going on this was way down on the priority list but luckily someone other than ourselves picked this up. As usual the patch is tiny as all the infrastructure work had been done multiple kernel releases ago. In addition to all the tests that we already have I requested that Rodrigo add a dedicated tmpfs testsuite for idmapped mounts to xfstests. It is to be included into xfstests during the v6.3 development cycle. This should add a slew of additional tests. * tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits) shmem: support idmapped mounts for tmpfs fs: move mnt_idmap fs: port vfs{g,u}id helpers to mnt_idmap fs: port fs{g,u}id helpers to mnt_idmap fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap fs: port i_{g,u}id_{needs_}update() to mnt_idmap quota: port to mnt_idmap fs: port privilege checking helpers to mnt_idmap fs: port inode_owner_or_capable() to mnt_idmap fs: port inode_init_owner() to mnt_idmap fs: port acl to mnt_idmap fs: port xattr to mnt_idmap fs: port ->permission() to pass mnt_idmap fs: port ->fileattr_set() to pass mnt_idmap fs: port ->set_acl() to pass mnt_idmap fs: port ->get_acl() to pass mnt_idmap fs: port ->tmpfile() to pass mnt_idmap fs: port ->rename() to pass mnt_idmap fs: port ->mknod() to pass mnt_idmap fs: port ->mkdir() to pass mnt_idmap ...

fs: port ->permission() to pass mnt_idmap

2023-01-19T08:24:28+00:00

Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Christian Brauner (Microsoft)