kernel/git/stable/linux.git/fs/ext4, branch linux-5.9.y

ext4: fix bogus warning in ext4_update_dx_flag()

2020-11-24T12:39:09+00:00

commit f902b216501094495ff75834035656e8119c537f upstream. The idea of the warning in ext4_update_dx_flag() is that we should warn when we are clearing EXT4_INODE_INDEX on a filesystem with metadata checksums enabled since after clearing the flag, checksums for internal htree nodes will become invalid. So there's no need to warn (or actually do anything) when EXT4_INODE_INDEX is not set. Link: https://lore.kernel.org/r/20201118153032.17281-1-jack@suse.cz Fixes: 48a34311953d ("ext4: fix checksum errors with indexed dirs") Reported-by: Eric Biggers Reviewed-by: Eric Biggers Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: unlock xattr_sem properly in ext4_inline_data_truncate()

2020-11-18T18:22:23+00:00

commit 7067b2619017d51e71686ca9756b454de0e5826a upstream. It takes xattr_sem to check inline data again but without unlock it in case not have. So unlock it before return. Fixes: aef1c8513c1f ("ext4: let ext4_truncate handle inline data correctly") Reported-by: Dan Carpenter Cc: Tao Ma Signed-off-by: Joseph Qi Reviewed-by: Andreas Dilger Link: https://lore.kernel.org/r/1604370542-124630-1-git-send-email-joseph.qi@linux.alibaba.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: correctly report "not supported" for {usr,grp}jquota when !CONFIG_QUOTA

2020-11-18T18:22:23+00:00

commit 174fe5ba2d1ea0d6c5ab2a7d4aa058d6d497ae4d upstream. The macro MOPT_Q is used to indicates the mount option is related to quota stuff and is defined to be MOPT_NOSUPPORT when CONFIG_QUOTA is disabled. Normally the quota options are handled explicitly, so it didn't matter that the MOPT_STRING flag was missing, even though the usrjquota and grpjquota mount options take a string argument. It's important that's present in the !CONFIG_QUOTA case, since without MOPT_STRING, the mount option matcher will match usrjquota= followed by an integer, and will otherwise skip the table entry, and so "mount option not supported" error message is never reported. [ Fixed up the commit description to better explain why the fix works. --TYT ] Fixes: 26092bf52478 ("ext4: use a table-driven handler for mount options") Signed-off-by: Kaixu Xia Link: https://lore.kernel.org/r/1603986396-28917-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: do not use extent after put_bh

2020-11-05T10:51:52+00:00

commit d7dce9e08595e80bf8039a81794809c66fe26431 upstream. ext4_ext_search_right() will read more extent blocks and call put_bh after we get the information we need. However, ret_ex will break this and may cause use-after-free once pagecache has been freed. Fix it by copying the extent structure if needed. Signed-off-by: yangerkun Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: fix bs < ps issue reported with dioread_nolock mount opt

2020-11-05T10:51:52+00:00

commit d1e18b8824dd50cff255e6cecf515ea598eaf9f0 upstream. left shifting m_lblk by blkbits was causing value overflow and hence it was not able to convert unwritten to written extent. So, make sure we typecast it to loff_t before do left shift operation. Also in func ext4_convert_unwritten_io_end_vec(), make sure to initialize ret variable to avoid accidentally returning an uninitialized ret. This patch fixes the issue reported in ext4 for bs < ps with dioread_nolock mount option. Fixes: c8cc88163f40df39e50c ("ext4: Add support for blocksize < pagesize in dioread_nolock") Cc: stable@kernel.org Reported-by: Aneesh Kumar K.V Signed-off-by: Ritesh Harjani Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/af902b5db99e8b73980c795d84ad7bb417487e76.1602168865.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: fix bdev write error check failed when mount fs with ro

2020-11-05T10:51:52+00:00

commit 9704a322ea67fdb05fc66cf431fdd01c2424bbd9 upstream. Consider a situation when a filesystem was uncleanly shutdown and the orphan list is not empty and a read-only mount is attempted. The orphan list cleanup during mount will fail with: ext4_check_bdev_write_error:193: comm mount: Error while async write back metadata This happens because sbi->s_bdev_wb_err is not initialized when mounting the filesystem in read only mode and so ext4_check_bdev_write_error() falsely triggers. Initialize sbi->s_bdev_wb_err unconditionally to avoid this problem. Fixes: bc71726c7257 ("ext4: abort the filesystem if failed to async write metadata buffer") Cc: stable@kernel.org Signed-off-by: Zhang Xiaoxu Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20200928020556.710971-1-zhangxiaoxu5@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: clear buffer verified flag if read meta block from disk

2020-11-05T10:51:52+00:00

commit d9befedaafcf3a111428baa7c45b02923eab2d87 upstream. The metadata buffer is no longer trusted after we read it from disk again because it is not uptodate for some reasons (e.g. failed to write back). Otherwise we may get below memory corruption problem in ext4_ext_split()->memset() if we read stale data from the newly allocated extent block on disk which has been failed to async write out but miss verify again since the verified bit has already been set on the buffer. [ 29.774674] BUG: unable to handle kernel paging request at ffff88841949d000 ... [ 29.783317] Oops: 0002 [#2] SMP [ 29.784219] R10: 00000000000f4240 R11: 0000000000002e28 R12: ffff88842fa1c800 [ 29.784627] CPU: 1 PID: 126 Comm: kworker/u4:3 Tainted: G D W [ 29.785546] R13: ffffffff9cddcc20 R14: ffffffff9cddd420 R15: ffff88842fa1c2f8 [ 29.786679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS ?-20190727_0738364 [ 29.787588] FS: 0000000000000000(0000) GS:ffff88842fa00000(0000) knlGS:0000000000000000 [ 29.789288] Workqueue: writeback wb_workfn [ 29.790319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.790321] (flush-8:0) [ 29.790844] CR2: 0000000000000008 CR3: 00000004234f2000 CR4: 00000000000006f0 [ 29.791924] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.792839] RIP: 0010:__memset+0x24/0x30 [ 29.793739] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.794256] Code: 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 033 [ 29.795161] Kernel panic - not syncing: Fatal exception in interrupt ... [ 29.808149] Call Trace: [ 29.808475] ext4_ext_insert_extent+0x102e/0x1be0 [ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0 [ 29.809652] ext4_map_blocks+0x290/0x8a0 [ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0 [ 29.809652] ext4_map_blocks+0x290/0x8a0 [ 29.810161] ext4_writepages+0xc85/0x17c0 ... Fix this by clearing buffer's verified bit if we read meta block from disk again. Signed-off-by: zhangyi (F) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200924073337.861472-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: fix invalid inode checksum

2020-11-05T10:51:52+00:00

commit 1322181170bb01bce3c228b82ae3d5c6b793164f upstream. During the stability test, there are some errors: ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid. If the inode->i_iblocks too big and doesn't set huge file flag, checksum will not be recalculated when update the inode information to it's buffer. If other inode marks the buffer dirty, then the inconsistent inode will be flushed to disk. Fix this problem by checking i_blocks in advance. Cc: stable@kernel.org Signed-off-by: Luo Meng Reviewed-by: Darrick J. Wong Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: implement swap_activate aops using iomap

2020-11-05T10:51:51+00:00

commit 0e6895ba00b7be45f3ab0d2107dda3ef1245f5b4 upstream. After moving ext4's bmap to iomap interface, swapon functionality on files created using fallocate (which creates unwritten extents) are failing. This is since iomap_bmap interface returns 0 for unwritten extents and thus generic_swapfile_activate considers this as holes and hence bail out with below kernel msg :- [340.915835] swapon: swapfile has holes To fix this we need to implement ->swap_activate aops in ext4 which will use ext4_iomap_report_ops. Since we only need to return the list of extents so ext4_iomap_report_ops should be enough. Cc: stable@kernel.org Reported-by: Yuxuan Shui Fixes: ac58e4fb03f ("ext4: move ext4 bmap to use iomap infrastructure") Signed-off-by: Ritesh Harjani Link: https://lore.kernel.org/r/20200904091653.1014334-1-riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: fix error handling code in add_new_gdb

2020-11-05T10:51:51+00:00

commit c9e87161cc621cbdcfc472fa0b2d81c63780c8f5 upstream. When ext4_journal_get_write_access() fails, we should terminate the execution flow and release n_group_desc, iloc.bh, dind and gdb_bh. Cc: stable@kernel.org Signed-off-by: Dinghao Liu Reviewed-by: Andreas Dilger Link: https://lore.kernel.org/r/20200829025403.3139-1-dinghao.liu@zju.edu.cn Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman