kernel/git/stable/linux.git/fs/gfs2/util.c, branch linux-3.13.y

GFS2: Move gfs2_icbit_munge into quota.c

2013-10-02T13:47:02+00:00

This function is only called twice, and both callers are quota related, so lets move this function into quota.c and make it static. Signed-off-by: Steven Whitehouse

GFS2: Reinstate withdraw ack system

2013-02-13T12:21:40+00:00

This patch reinstates the ack system which withdraw should be using. It appears to have been accidentally forgotten when the lock module was merged into GFS2, due to two different sysfs files having the same name. Reported-by: David Teigland Signed-off-by: Steven Whitehouse

GFS2: Clean up log write code path

2012-04-24T15:44:34+00:00

Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse

GFS2: Use slab for block reservation memory

2012-04-24T15:44:29+00:00

This patch changes block reservations so it uses slab storage. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse

GFS2: Remove a __GFP_NOFAIL allocation

2012-03-08T12:10:23+00:00

In order to ensure that we've got enough buffer heads for flushing the journal, the orignal code used __GFP_NOFAIL when performing this allocation. Here we dispense with that in favour of using a mempool. This should improve efficiency in low memory conditions since flushing the journal is a good way to get memory back, we don't want to be spinning, waiting on memory allocations. The buffers which are allocated via this mempool are fairly short lived, so that we'll recycle them pretty quickly. Although there are other memory allocations which occur during the journal flush process, this is the one which can potentially require the most memory, so the most important one to fix. The amount of memory reserved is a fixed amount, and we should not need to scale it when there are a greater number of filesystems in use. Signed-off-by: Steven Whitehouse

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

GFS2: Metadata address space clean up

2010-03-01T14:07:37+00:00

Since the start of GFS2, an "extra" inode has been used to store the metadata belonging to each inode. The only reason for using this inode was to have an extra address space, the other fields were unused. This means that the memory usage was rather inefficient. The reason for keeping each inode's metadata in a separate address space is that when glocks are requested on remote nodes, we need to be able to efficiently locate the data and metadata which relating to that glock (inode) in order to sync or sync and invalidate it (depending on the remotely requested lock mode). This patch adds a new type of glock, which has in addition to its normal fields, has an address space. This applies to all inode and rgrp glocks (but to no other glock types which remain as before). As a result, we no longer need to have the second inode. This results in three major improvements: 1. A saving of approx 25% of memory used in caching inodes 2. A removal of the circular dependency between inodes and glocks 3. No confusion between "normal" and "metadata" inodes in super.c Although the first of these is the more immediately apparent, the second is just as important as it now enables a number of clean ups at umount time. Those will be the subject of future patches. Signed-off-by: Steven Whitehouse

GFS2: Add "-o errors=panic|withdraw" mount options

2009-08-24T09:44:18+00:00

This patch adds "-o errors=panic" and "-o errors=withdraw" to the gfs2 mount options. The "errors=withdraw" option is today's current behaviour, meaning to withdraw from the file system if a non-serious gfs2 error occurs. The new "errors=panic" option tells gfs2 to force a kernel panic if a non-serious gfs2 file system error occurs. This may be useful, for example, where fabric-level fencing is used that has no way to reboot (such as fence_scsi). Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse

GFS2: Merge lock_dlm module into GFS2

2009-03-24T11:21:14+00:00

This is the big patch that I've been working on for some time now. There are many reasons for wanting to make this change such as: o Reducing overhead by eliminating duplicated fields between structures o Simplifcation of the code (reduces the code size by a fair bit) o The locking interface is now the DLM interface itself as proposed some time ago. o Fewer lookups of glocks when processing replies from the DLM o Fewer memory allocations/deallocations for each glock o Scope to do further optimisations in the future (but this patch is more than big enough for now!) Please note that (a) this patch relates to the lock_dlm module and not the DLM itself, that is still a separate module; and (b) that we retain the ability to build GFS2 as a standalone single node filesystem with out requiring the DLM. This patch needs a lot of testing, hence my keeping it I restarted my -git tree after the last merge window. That way, this has the maximum exposure before its merged. This is (modulo a few minor bug fixes) the same patch that I've been posting on and off the the last three months and its passed a number of different tests so far. Signed-off-by: Steven Whitehouse

GFS2: Clean up & move gfs2_quotad

2009-01-05T07:39:05+00:00

This patch is a clean up of gfs2_quotad prior to giving it an extra job to do in addition to the current portfolio of updating the quota and statfs information from time to time. As a result it has been moved into quota.c allowing one of the functions it calls to be made static. Also the clean up allows the two existing functions to have separate timeouts and also to coexist with its future role of dealing with the "truncate in progress" inode flag. The (pointless) setting of gfs2_quotad_secs is removed since we arrange to only wake up quotad when one of the two timers expires. In addition the struct gfs2_quota_data is moved into a slab cache, mainly for easier debugging. It should also be possible to use a shrinker in the future, rather than the current scheme of scanning the quota data entries from time to time. Signed-off-by: Steven Whitehouse