kernel/git/stable/linux.git/fs/reiserfs/xattr_security.c, branch master

reiserfs: The last commit

2024-10-21T14:29:38+00:00

Deprecation period of reiserfs ends with the end of this year so it is time to remove it from the kernel. Acked-by: Darrick J. Wong Acked-by: Christian Brauner Signed-off-by: Jan Kara

reiserfs: Initialize sec->length in reiserfs_security_init().

2023-05-25T21:44:44+00:00

syzbot is reporting that sec->length is not initialized. Since security_inode_init_security() returns 0 when initxattrs is provided but call_int_hook(inode_init_security) returned -EOPNOTSUPP, control will reach to "if (sec->length && ...) {" without initializing sec->length. Reported-by: syzbot Closes: https://syzkaller.appspot.com/bug?extid=00a3779539a23cbee38c Signed-off-by: Tetsuo Handa Fixes: 52ca4b6435a4 ("reiserfs: Switch to security_inode_init_security()") Signed-off-by: Paul Moore

reiserfs: Add security prefix to xattr name in reiserfs_security_write()

2023-04-04T18:26:26+00:00

Reiserfs sets a security xattr at inode creation time in two stages: first, it calls reiserfs_security_init() to obtain the xattr from active LSMs; then, it calls reiserfs_security_write() to actually write that xattr. Unfortunately, it seems there is a wrong expectation that LSMs provide the full xattr name in the form 'security.'. However, LSMs always provided just the suffix, causing reiserfs to not write the xattr at all (if the suffix is shorter than the prefix), or to write an xattr with the wrong name. Add a temporary buffer in reiserfs_security_write(), and write to it the full xattr name, before passing it to reiserfs_xattr_set_handle(). Also replace the name length check with a check that the full xattr name is not larger than XATTR_NAME_MAX. Cc: stable@vger.kernel.org # v2.6.x Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation") Signed-off-by: Roberto Sassu Signed-off-by: Paul Moore

reiserfs: Switch to security_inode_init_security()

2023-03-23T23:32:02+00:00

In preparation for removing security_old_inode_init_security(), switch to security_inode_init_security(). Commit 572302af1258 ("reiserfs: Add missing calls to reiserfs_security_free()") fixed possible memory leaks and another issue related to adding an xattr at inode creation time. Define the initxattrs callback reiserfs_initxattrs(), to populate the name/value/len triple in the reiserfs_security_handle() with the first xattr provided by LSMs. Make a copy of the xattr value, as security_inode_init_security() frees it. After the call to security_inode_init_security(), remove the check for returning -EOPNOTSUPP, as security_inode_init_security() changes it to zero. Multiple xattrs are currently not supported, as the reiserfs_security_handle structure is exported to user space. As a consequence, even if EVM is invoked, it will not provide an xattr (if it is not the first to set it, its xattr will be discarded; if it is the first, it does not have xattrs to calculate the HMAC on). Signed-off-by: Roberto Sassu Reviewed-by: Casey Schaufler Reviewed-by: Mimi Zohar Signed-off-by: Paul Moore

fs: port xattr to mnt_idmap

2023-01-19T08:24:28+00:00

Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Christian Brauner (Microsoft)

reiserfs: Add missing calls to reiserfs_security_free()

2022-11-22T22:43:31+00:00

Commit 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation") defined reiserfs_security_free() to free the name and value of a security xattr allocated by the active LSM through security_old_inode_init_security(). However, this function is not called in the reiserfs code. Thus, add a call to reiserfs_security_free() whenever reiserfs_security_init() is called, and initialize value to NULL, to avoid to call kfree() on an uninitialized pointer. Finally, remove the kfree() for the xattr name, as it is not allocated anymore. Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation") Cc: stable@vger.kernel.org Cc: Jeff Mahoney Cc: Tetsuo Handa Reported-by: Mimi Zohar Reported-by: Tetsuo Handa Signed-off-by: Roberto Sassu Reviewed-by: Mimi Zohar Signed-off-by: Paul Moore

acl: handle idmapped mounts

2021-01-24T13:27:17+00:00

The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig Cc: David Howells Cc: Al Viro Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Christian Brauner

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

switch xattr_handler->set() to passing dentry and inode separately

2016-05-27T19:39:43+00:00

preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: Al Viro

xattr_handler: pass dentry and inode as separate arguments of ->get()

2016-04-11T00:48:24+00:00

... and do not assume they are already attached to each other Signed-off-by: Al Viro